EVERYTHINGS STUCK! Can We Make These 100+ YEAR OLD Hit Miss Engines RUN Again? ENGINE REVIVE!

Screw Driver
87 followers
#machinery #motorbikes #occupations #career
One is stuck and the other one is dust! And we only have ONE DAY to get it done!
I was happy with the outcome and I hope you guys are to!
hope you enjoy!
Today I'm going to see if I can get both of these antique hit and miss engines running in a single
day. Both of them are barn fresh, one of them's even stuck. Hopefully we have some good luck
with this. Stick around and I hope you guys enjoy. First off, we have an early 1920s model K.A.
Stover. This engine is all original with a homemade cart. It appears to be barn fresh.
It's been sitting at least 50-60 years I'd say, if not more. This engine is in a wet stuck
condition where there's grease everywhere but the engine is stuck. When looking at engines that are
stuck, I'd much rather find a wet stuck engine than a dry stuck engine as it means they have
been maintained better and have way more oil on them. As you'll see in our next engine, a dry
engine is not always a good thing and will normally mean more problems. Only time will tell
though and hopefully we can get this thing broke loose and running today. Up next is this one and
a half horsepower economy engine. This engine was made in the late 1910s. This engine is in all
original condition as well as having the original cart. This engine is more what I describe as a
dry stuck though it isn't quite stuck but it is more prone to have problems when you work on them
than if you find one like that Stover which is covered in grease. These economies were made by
Hercules and sold through Sears. With a little bit of luck, hopefully we can get this one loosened
up and running as well. I bought the economy missing a couple different parts so I have to
wait to work on it until my friend David gets up here. So we're gonna start off first with this
Stover. The first thing you ever want to do on a project like this engine, right after you buy it,
right before you buy it, or anytime you do anything with one, make sure anything that moves or is
going to move when you spin it is loose. If it isn't all loose and something's stuck and you don't
pay attention, you'll end up breaking it. As you'll see, this one has a broken rocker arm from somebody
doing just that. The exhaust has been stuck and they turned it over and it broke the rocker arm.
With that being said, anything that's supposed to be loose is either loose or broken on this so we
can move on to trying to get the piston out. I'm gonna start with the easiest method and work my
way up from there. First thing I'm gonna try is to just kind of hammer on it with a rubber mallet
see if it easily breaks loose and work my way up to, if I have to, I'll take the head off and beat
on the top of the cylinder. That's enough yapping out of me for now so I'll just let you guys sit
back and enjoy. This engine ended up having two stuck rings. The front most ring was loose and
the back two were stuck. I am by no means the best person at breaking stuck rings loose without
breaking them. Best way I've found to get them out is just tedious nudging back and forth just to
oil and penetrating oil into the backs of them and with any luck you'll get them to come loose
and with any bad luck you'll just have a random occasion where the ring gives up and now you have
one last ring to deal with. This rocker arm is a pretty good example of how little it takes to
break these parts as those valves weren't very stuck at all but yet it still broke the rocker
arm when somebody turned it over who knows how many years ago. The stover turned out pretty nice
and now we're moving on to the economy. Me and David already started looking at the engine and
as you can tell we are not very enthused. We can talk about how much of a piece of garbage it is
later. First thing David pointed out is the cam roller doesn't quite look how it's supposed to.
It is supposed to be a nice round circle to roll on our cam and it's more of a misshapen hexagon
at best. I quickly whipped up one on the lathe and we should be good to go on that part. Extreme
items like this are what really show up on dry engines like this because they never really got
treated enough to keep lubrication well and they ended up wearing out parts really badly.
This engine was obviously neglected and that's why it had problems like this to this extreme.
Next we moved on to the cam gear which the one that came with it had a couple teeth missing and
didn't look like it was in very good shape. Luckily David had an extra one lying around
and he brought it up for us to use. With David's help this engine kind of got sped through. I didn't
get near as much footage of it as I wanted but we were in a time constraint of a single day
as we were heading to an engine show the next day and I wanted to take these engines along
to try and sell them because I'm not planning on keeping them. I looked in here it's full of plant.
No it's a plant. That is a root. That latch out was pathetic. Even though me and David were pretty
rushed when we were working on this engine I wanted to take the time to film this as it's a
really key component on what makes some of these engines run really badly. If you have a hit and
miss engine that runs like this a main culprit of it is your latch out for your push rod is not set
correctly. It's basically taking up your valve lash and not letting your exhaust open enough so
it's bogging the engine down as it sits. With an economy it's real easy to adjust because there's
a screw that lets you move the latch out finger out farther. So I'll quickly adjust it and you
can see the side beside and you'll see the world of a difference in how this engine coasts and
runs. I'm pretty happy with how these two engines turned out. I hope you guys are too. I hope this
video was a little bit informative some of you people that don't know quite what you're getting
into working on engines like this. I hope this inspires some of you to get out there and try
and work on engines like this. If you enjoy hit and miss engine or flywheel engine related content
please go check out my channel. Consider subscribing. Leave a like down below if you
like the video and leave a comment if you have any questions or anything you want to say. But
with that being said that's where this video is going to have to end and I hope you guys
enjoyed and I'm going to catch you guys next time. You have a nice day!
