Exclusive Hands-On with the New FN Evolys: Live Fire & Full Breakdown

Battlefield Firearms
3 followers
4 Video Views·Dec 22, 2025
Step into the future of firepower.
In this exclusive hands-on, Jonathan takes a deep dive into FN Herstal’s Evolys: the next-gen machine gun bridging the gap between assault rifle and light machine gun.
0:00 Intro
1:27 Origins & Development
3:20 Specs
5:40 Key Design Features
17:54 Range Demo
21:47 Future & Outro
We are the Royal Armouries, the United Kingdom's national collection of arms and armour. Discover what goes on behind the scenes and watch our collection come to life. See combat demonstrations, experience jousting and meet our experts.
Hi everyone, welcome to What Is This Weapon, a special episode of What Is This Weapon.
I'm Jonathan, as you hopefully know by now.
You won't know what these are yet, but we're coming to that.
And this is Stevie.
Good to meet you.
Good to meet you, Jonathan.
Nice to meet you in person.
Yeah.
Nice to meet you at last.
Tell us where you're from, as if we can't tell from your polo shirt there, and then
we'll get into a bit about the gun.
Yep.
So part of the FN Browning Group, which is obviously the worldwide established brand,
but I'm in the subsidiary of FN UK.
So we are based down in Kent, a beautiful little place, just outside of Erith.
And that used to be Manroy, is that right?
People may not be too familiar with the history of the...
Yeah.
So it started in 1975, Manroy Engineering, a man called Roy, a lady called Mandy.
Amazing company name, by the way.
I think that's my favorite one ever.
And they ran the company and was doing weapon accessories and spare parts and weapons for
the UK M.O.D.
And they got bought out in 1st of July, actually, 2014, and then ended up changing the name
1st of September 2017 to then FNH UK.
Which makes sense because you're now involved in all of this cool kit.
So tell us when you first came across this, I suppose we should say what it is, shouldn't
we?
Don't want to keep people on tenterhooks for too long.
Yeah.
So this is?
So this is the FN Avolis.
Yeah.
So I came across this gun first out in 2023.
I just returned from the jungle as the Brunei QMSI and I got introduced to this weapon as
I was working in Warminster, the Land Warfare Centre, as the training warrant officer and
subsequently went on to become the SMI Lethality as part of the Infantry Trials and Development
Unit and then went into further work with the gun.
Great.
So you're very much coming from a user perspective with this, which can only be useful with a
big company that makes guns.
Might sound obvious, but not every company in history has employed people who know what
they're talking about from the ground perspective.
So I think that's really interesting to us.
Tell us about the gun.
What are the origins of this?
These are, I mean, it might sound obvious to say, but they're both very short and very
light.
Yes.
Is that that's indicative of their intended role?
How did this thing come about?
Yeah.
So around 2012, the first kind of conversation started surrounding the FN Avalis and there
was conversations around the infantry assault rifle at the time, a heavy barreled rifle
and do FN go into development of a heavy barreled rifle or an LMG?
It's the age old quandary, isn't it?
So that was the kind of origins and a thought process and conversations were happening across
America and Belgium at that time.
And obviously here we are in the UK now going strength to strength.
So that was the kind of first conversations in 2012 and the development of the gun went
on for probably about 10 years.
And I'll go into the detail of where all that work went into shortly, but it was more so
heavy barreled rifle versus a light machine gun.
And obviously, as you can see, they went for the latter of those two options.
Yeah.
So I'm throwing back to the Bren and the MG42, but really this is more of a, this is more
like BAR versus something belt fed, isn't it?
It's that kind of squad support, the organic to the infantry squad, that kind of thing.
And perhaps more so, is it fair to say it's an assault machine gun?
That's a phrase that gets bandied around now, something for like even more close quarters,
just volume of fire.
Not so much laying down support for maneuver elements.
Is that right?
Yeah, I think it's, I mean, ergonomically it operates very much like a rifle, but it
gives you...
It feels like a rifle.
Yeah.
I mean, even, so I've got here the 7.62 version.
I had to check before I picked it up because they really do look similar.
They're both very lightweight.
If you do pick them up one after the other, you definitely can tell.
Yeah.
So this is 7.62 by 51.
That one is 5.56 by 45, yeah.
So there's, this is 5.5 kilogram in the 5.56 millimeter version, and that's 6.2 kilogram
in the 7.62 millimeter version.
In terms of weight, there's only 700 grams difference in terms of length.
This is 34 inches with the buttstock retracted, 37.
And then with the buttstock fully extended, 37, 41.
So the difference of three to four inches with the buttstock out.
Very maneuverable, quick to bear to arms, and very lightweight for offensive missions
on a backfield.
So you could, you could have gone for this receiver set and had it convertible, or even
had a parallel variant, but based it entirely on this bigger, heavier gun, because it's
still really lightweight, but you went with, you went with both so that you can maximize
the lightweight of the 5.56.
Is that fair to say?
Exactly that.
And it does, it absolutely does work because you can tell, you really can tell the super
lightweight of that versus the still pretty lightweight of the other thing.
And then I suppose the next thing that caught my eye after shortness and lightness of weight
is these bits on the side here, and the lack of a bit on the top.
The infamous, the famous machine gun top cover, or as we've seen laterally, laterally, laterally
and laterally, pivoting top cover.
Something that breaks up your otherwise continuous top rail, which isn't ideal.
Not ideal.
So I mean, back in the day, and kind of referring to the MAG 58 now, which is obviously a legendary
weapon that's still used all over the world, machine guns way back when were designed for
reversionary sights or iron sights, as we call them, and now we've moved into night
fire, time firing especially.
And if you give a soldier now the difference of, or the option to use an iron sight versus
a optic, I'm guessing the great majority of myself included in my former days would choose
an optic for accuracy, magnification, surveillance aid on the battlefield, et cetera.
And we've seen, we've got GPMGs with rails on the top cover, haven't we?
Yes.
But they're still mobile, they're still, not one continuous rail.
Why should you not have that capability on a machine gun when you've got it on a rifle?
I guess.
I mean, thinking back to the SCAR, it was the first assault rifle with a monolithic
top rail.
This is now the first machine gun with that iteration that gives you the option.
So no rolling on and off, as you say, no going up and down.
And therefore, you've got a completely zeroed machine gun, you know, throughout all occasions.
And just through wear and, you know, physics, metal will wear.
And if you go out for a three month, four month, six month deployment, continually slapping
that top rail will, you know, loosen your zero, so to speak.
Sure.
No doubt.
And, but so that you don't simply have, because I think I've seen at least one attempt where
it's like a pull through with a starter tab.
But we do have a top cover, it's just that it's a side cover.
Yes.
We've got it.
Well, you'll see this, we'll take these facing that way on the range in a moment, but we've
got a button here and it flips open much like a top cover would, but to the side, and we've
got a ramp on here and this paw will hold the round in place, I'm hoping, so as not
to embarrass myself.
Absolutely.
Shortly.
Yeah.
So these paws just in here on the feed tray will hold the rounds in place, the belt will
go on.
And I suppose the so what to that is it allows the user to load, reload, make safe, continue
all their drills whilst in the stood up position, which is very difficult for the weapons or
machine guns.
And just on the back of the side cover, these are self-aligning feed paws.
So what I mean by that is, if you're not quite true on the, the paws on the back of the side
cover will self-align your rounds, making sure that you have a first time feed into
the chamber every time.
So that's a feature I haven't seen before on a machine gun.
So we'll see, I mean, some of this stuff we'll, we'll see when we actually shoot it, but so
you mentioned, mentioned earlier that we're going from safe to semi to automatic, like
a rifle.
Yes.
I know some designs go the other way, other way around.
Yeah.
Would you say the advantage here is, or is this a doctrine thing?
So this is, it's more so a policy doctrine thing in the UK, particularly in Europe, actually,
where there's levels of escalation, so to speak, from safe to semi to full auto.
It allows the fire to kind of go up through the gears, so to speak.
The Avolis actually in the US version is the opposite to that, where it goes safe, automatic
and then into semi.
So the options there for the user, you know, however they want that configured is something
that the FN can do.
I think just while the side cover's open, I think that the key thing with this as a
user, you know, to maintain momentum in the firefight, you know, hard, fast and aggressive
assaulting missions with a machine gun within the section or the platoon is, you know, if
you get contacted generally, or if you're progressing through the battlefield, you want
to maintain momentum in the firefight, and this will allow you to do that and changing
the belt on the move, as opposed to looking for cover, getting down, more than likely
in the prone position, two handed drills, top cover up, sweeping feed trays, et cetera.
And this will just maintain the momentum.
So essentially, if you've got cover and fire in your fire manoeuvre, then you should be
able to do soldier skills dependent, obviously, but you'd like to think that they can then
do these drills on the move and continue to progress along their assaulting mission.
So you'd hook on an ammunition container on the soft patch on the bottom, most likely,
and then you're able to, in theory, so I'm going to make a video game observation here.
So I do a lot with that, as you probably know, picking apart these poor developers and animators
and artists who do all this hard work.
Now inevitably, when you're playing a video game, you're running around like Rambo and
you're doing like impossible reloads, essentially, this is this would be the closest thing I've
seen to being able to run around and use a machine gun, light machine gun or assault
machine gun, whatever we want to call it, more like an assault rifle.
Yeah, absolutely.
You know, operates very much in its use as a rifle, if you will, but keeping your automatic
and machine gun capability ranges that you'd associate with a machine gun and suppressive
fire again that you can associate.
And I think going back to the kind of safety catch and going up through semi into full
auto, you know, this was when it was kind of first discussed in 2012, one of the, well,
the first machine gun at that point that was, that give a semi automatic, sorry, a semi
firing option.
Yeah.
Because to date, you know, the old days of Northern Ireland, for example, where we were
going out with the MAG 58 or the L7A2 as it is now, it was fully automatic.
So therefore the rules of engagement of minimum force and single shots, you couldn't take
that out the door.
Which wasn't ideal for the troops, obviously.
No, not at all.
It's reminding me as well of, again, of the Bren gun where there was a tendency, it may
even have been doctrine, sort of enshrined in doctrine to fire, to use semi automatic
fire in certain circumstances.
So the enemy didn't know where your section machine gun was.
And to conserve ammunition, because you only had a 28 round magazine on that thing, not
the case here, of course.
So a bit different, but now I'm thinking I'm going to feel this in a moment, but there's
some buffering going on in here, isn't there?
There is.
So there's a couple of things that allows the recoil to be minimal for the user.
So the first one is the length of the bolt.
It's slightly longer than on traditional designs.
What that does, it locks into the breech slightly early with the locking spines.
It's an open bolt weapon system, as you would expect on a machine gun.
But probably more importantly in terms of recoil and reliability is it unlocks slightly
later as well.
And what that allows is the gas to, it just gives an extra millisecond, so to speak, for
the gas to drain slightly further.
What does that mean?
Less gases, less back pressure, less wear on the working parts within the gun because
the muzzle velocity is slightly slower.
So the weapon has an extra extended life.
And then to the rear, as you've alluded to, there's a hydraulic buffer, which sits to
the rear and is a great feature.
Number one, obviously it softens recoil slightly for the user, but in terms of reliability,
you guarantee rounds per minute.
So with the 5.56, it's 750 rounds a minute, with the 7.62, it's 700, but it doesn't go
too far off course because of the hydraulic buffer will control the cyclic rate of the
gun, added reliability, cleaner feed.
And I think this is more relevant when you put a suppressor on the guns and we see that
more and more.
Which I assume these are set up to do or capable of taking?
Absolutely.
Yeah.
And obviously with a suppressor on the end, you'd expect more back pressure from gases.
So that allows the gases to drain slightly more.
There's only one gas sitting on the breakout regulator as well, which is nice, again, for
the user.
Keep it simple, stupid, as we said.
Which again, speaks to the role.
So we don't have a quick change barrel?
Not a quick change barrel.
We call it an easy change barrel.
So I can change the barrel in less than a minute and I'm sure if I can do it with my
monkey hands, I'm sure an armor and a user could manage also.
But that's not, it's not meant for, it's not a, I keep coming back to Bren gun.
I know it's like several generations ahead of that thing, but the quick change barrel
on that thing was for when it's on a sustained fire mount in a defensive role, the typical
actions we think of in the Second World War with that were with the barrel on there.
They weren't even carrying a spare.
This is it.
But it's built in capability, adding weight to the weapon that doesn't need to be there.
Ideally you'd have had two separate guns.
And arguably one of them would have been belt fed.
But I don't want to annoy the Bren fans who are watching.
So this is, we've sort of, we've gone to the general purpose machine gun, but we're now
a little bit past that you can still have a general purpose machine gun.
You guys make one famously.
But we're branching off into specialized bits of kit.
And in this case, it's highly mobile firepower that can be deployed in the traditional light
machine gun role if needs be, because it's got like these barrels will take a fair caning
from what you were telling me.
But it's all about mobility and weight of fire and all of that.
It's a free-floating barrel, but it's a thick barrel.
And the profile of that metal will one, aid with accuracy, but two, hold a lot more heat
than a thinner barrel, obviously.
But in terms of where we sit with it at the moment, 14 inch barrel on the 5.56, 16 inch
barrel on 7.62.
And yeah, I mean, when you compare that to the MAG 58, 24.8 inches.
So it's a lot longer.
So therefore a lot more difficult to maneuver on the battlefield, particularly in urban
fewer.
Of course.
Et cetera.
So that's really where this sits.
And this is, of course, is why it was deleted from the section in the first place only to
then come back.
Exactly.
And you know, it's a pretty heavy gun.
Yeah.
Obviously, soldiers are always having to fight, or should I say designers, engineers, procurement
people, they're always trying to fight the last war and chasing their tails in that respect.
But this gives you that option if you need a lightweight system, or if you want to go
traditional, you've got the MAG as well.
Yes.
You know, really, you've gone from the MAG into the Minimi.
And then obviously you've got your personal weapon system.
And this sits somewhere in between probably the rifle and the Minimi.
Closer to the Minimi, I would suggest, on the weapon spectrum, if you will.
I suppose I should ask for doing what I do.
Is this system derived from either the MAG or the Minimi?
It's its own thing, I think.
It's very niche in terms of its design.
It's a very clever design.
There are similarities.
You know, there is a relationship, but it's a fairly fresh kind of innovative design to
me.
Because the Minimi is already diversified into the Mk46, Mk48.
It's kind of scaled back up to bigger calibers.
So it's interesting to see stuff derive into different variants, but then something completely
new come from the same stable.
Yeah.
I mean, the M249 in the US, and obviously we used to famously have the Mk2 in the UK,
and they were kind of looking at weapon inventories, and maybe scaling down in the US, the UK.
And again, that was a contributing factor to the design of the Evolis, and where it
kind of iterated from, and the relationship between the two.
And yeah.
And here we are, basically.
Yeah.
Well, whatever the sort of origins and purpose and ultimate places it ends up, it's something
completely new, which is fantastic to see.
And I think we're going to get down and shoot one.
Let's do it.
Okay.
We are still on the range, but now facing the correct direction.
And you're going to talk me through shooting this thing, which is going to be a treat for
me.
Yeah.
And that's the 5.56 version, because they're not immediately obvious.
It's like the old father Ted joke, these cows are small, those are far away.
It's a very, very similar design.
And we're going to go for, well, in the traditional prone position to begin with.
Yes.
Yeah.
We'll start off in the prone, and then once you've had a little fire on single, and then
possibly automatic.
Oh, very definitely automatic.
We'll give that a go.
And then, you know, the beauty of this is to be able to fire on the march or on the
move.
So we'll get up into the standing position and we'll go for that.
Great.
Let's do it.
Rems on the feed tray.
You'll see as you put them on, they'll hold in place.
Yeah.
Nice and easy.
Yeah.
Interesting.
Closed up.
And the cocks are ready to go.
I'm ready.
So we'll try a few, or a couple, semi.
Yeah.
And you're ready to fire.
A pair of light.
I've gone for three there.
That's not bad.
That's pretty good.
I think you're too kind there, but...
All right, let's try a couple of bursts.
In fact, we've got five dots up there, so...
Stay on that one.
Great.
Last link ejected.
Ah, yeah.
Now that's a fairly critical point, isn't it?
Yeah.
So, unlike a lot of other machine guns, the last link is ejected on this, so as we alluded
to earlier, that kind of transition between belts on the move becomes a whole lot easier
without sweeping the feed tray whilst mid-contact or on the battlefield.
Yeah.
So to clear the gun, all we've got to do is cock it, drop the weapon, push the cocking
handle forward, and then we're opening up on the side door.
Inspecting the chamber from that position.
Yeah.
And then you can afford to close the side door now, and then operate the trigger, and
the gun is unlooped.
Right.
That was good.
But this thing primarily is designed for, well, the capability to fire from the shoulder.
So let's try that, see how I get on.
Okay.
Oh, well, first of all, let's just fold up the bipod out of the way.
We've fitted this vertical grip just for a bit more control, but I should now be ready
to go.
So, thank you.
Pull that left.
Yep.
Wow.
That is super controllable.
Like, gradually, I am moving back, for sure, but the first time in, I'm not really feeling
the recoil.
Yeah.
Very gentle.
Right.
So that's all the shooting done.
That was tremendous fun, I have to say.
As usual, any fun experience is coincidental to the learning.
Who am I kidding?
It's always fun to shoot.
Got to experience the side cover, all of that stuff that we were talking about earlier.
I think the only thing I failed to pick up on is the buttstock set up on this.
Yes.
So, M4 stock kind of design, if you will.
Six positions adjustable on the way back.
Yeah.
And probably a worthwhile mention is on the cheek riser.
There's two available cheek risers that will be set to the firer, and probably more so
for the optic to get the correct height for the optic that's in line with the gun, obviously.
At the moment, there's development going on for a folding buttstock.
Right.
So that's ongoing project at the moment.
You know, more so probably aimed at the air assault forces who may want this gun in the
future.
So, yeah, it'll come to the outside of the weapon.
Probably naturally that you can still hold the weapon a little close to the body for
weight distribution to minimize stress in terms of carrying the weapon away from the
body versus against it.
And is it intended to let you still fire with the buttstock folded?
Yes.
That's not always possible.
Yeah.
But it will be with this?
Yes.
Yeah.
Fully operational with the buttstock folded and firing as well.
That'll be something.
So finished product as far as being out there in the military, maybe law enforcement worlds.
But still being developed.
As all modern firearms are, it's never done until it's done.
We learned that with previous generation platforms where they just kept evolving in a less planned
way.
Yeah.
But now we're seeing it kind of more built in and more relationship with customers and
different people that acquire stuff will want different setups as well.
Yeah.
No, it's a good point.
Requirements of the users will dictate where it may spiral develop in the future.
Yeah.
So you'll be seeing more of this platform in future, no doubt.
Hopefully of Stevie as well.
Thank you so much for this.
We should just mention you have a new website, I gather, with the new branding.
I've got the old one on.
Yes.
But the old traditional logo is still in there, which I think is nice.
Yeah.
So the traditional logos we've seen for, I don't know, 135 years this year, actually.
I was just going to do the maths on that.
Yeah, we've used it.
I say we FN and myself included have used it as a trademark, I suppose.
But spun out the FN badge to do so.
Yeah.
Well, we don't talk about branding much on this channel, but in a historic sense, it's
actually really important.
Gun companies typically stick with the same one.
Some modern companies like to abandon their tradition.
So as a historian of these things, I'm glad that the old is still in there with the new.
But point being, you have a website, you have the usual social media channels as well.
People can follow along with the development of this and other products that are coming
down the pike as well.
Yes.
LinkedIn is probably a big one within the professional scene.
Sure.
Social media, Facebook, Instagram now.
I'm not on Instagram.
Middle aged man.
A little frightening.
But yeah, FN is all on there.
So yeah, maybe I should join.
All right.
Well, we'll see you again here on What's This Weapon next week.
Not with belt fed machine guns, but with hopefully something just as interesting.
