I Made a Plus-Size Edwardian Summer Dress

Edwardian Threads
5 followers
1 Video View·Dec 22, 2025
For my Edwardian haute girl summer look, I made this frilly Edwardian Day Dress, or Lingerie Dress. For this plus size sewing project, I used a pattern from Black Snail Patterns. I have longed to have a white, lacey, Edwardian summer dress and I'm so happy with how it came out! Underneath the dress, I wore my Edwardian Chemise, Edwardian Corset, Edwardian Combinations, Edwardian Petticoat, an Edwardian Bust Improver and an Edwardian Hip Pad. The Gibson Girl look was super popular during this time. Thank you for joining me on costube in my plus size historical costuming and sewing adventures! Stay tuned for CoSy, the Costube Symposium later this month!
Pocketful of Posies. Today's video is my Edwardian day dress. I am so excited, so
excited to share this with you. And I used a pattern from Black Snail
Patterns for this. And this video is kindly sponsored by Black Snail
Patterns. And if you would like a 15% discount on any digital pattern, you can
use the link below or type in pocketfulofposies for a promo code. This
dress has been a while in the making. I've been planning it for a while and I
finally get to share it with you. I decided to alter this day dress pattern
a little bit as far as the materials I used because I really wanted one of
those frothy, sheer-ish Edwardian white day dresses. So that's what I did. So
without further ado, here we go. I'm using Black Snail Patterns number 0916,
the Edwardian day dress pattern. And I will be making a few changes to the
pattern as I go. I began by making a mock-up of the bodice. Okay, so, oh, Thor
just came in. Come on, buddy. Mock-up is done and I'm going to put my corset on
and try it on me. Tried it on Freya, looks pretty good. I'm gonna make a few
changes and I'm going to try the mock-up of the collar because Black Snail, as
much as I love Black Snail Patterns, a lot of times collars are small, even if
you're not a big person. So I'm going to try that out and see what I need to do. I
know I need to make the neckline bigger, wider, so I'm going to cut some of that
off of the mock-up before I try it on. All right, here we go. I tried it on over
my Edwardian corset, link below to that video, and realized I needed a bit more
room and that the back was a little short. After making note of those changes
I needed, I started assembling the skirt pattern. Each skirt gore piece is
lengthened 10 inches. The skirt ruffle pieces are likewise lengthened by 10
inches. On to the bodice lining. I used cotton blal. After cutting the bodice
lining pieces out, I pinned the darts. Also, don't worry mama, I did iron these
pieces eventually. To the machine to sew the darts and the center front seam. I
cut the darts open, zigzag the raw edges, and whip stitch them down. Then I added
strips of twill tape to act as boning channels on each dart. I sewed the boning
channels down by hand. I went ahead and put the boning channels in the lining,
even though the pattern says to do it later, after the lining and the outer
fabric are connected, but since since I'm using such thin fabrics, I figured it
should probably go ahead and do that now rather than risk accidentally going
through to the outer fabric when I'm hand sewing those boning channels in. So,
did it to the front piece. Now I'm going to connect the back pieces on the side
piece to the front piece and then of the lining and then I'll do the boning
channels in the side seams as well. So, off we go. Next, I pinned and sewed the
back lining pieces to the side lining pieces. I also watched Jeeves and Worcester.
Hercules was helpful, as always. I moved back to the skirt and began pinning the
gores together. I had some moments of confusion when it seemed like my marks
weren't lining up, but then I realized I marked one of them incorrectly. I fixed
that and all was well. When I got all of the gores pinned together, I put it on
Freya to check the fit. I had a little excess at center back, but I didn't cut
any off because I wanted to test the fit on me with the corset and hip pad. Time
to sew the skirt gores together and I used a quarter inch seam allowance
instead of a 5 eighths inch seam allowance, as the pattern indicated,
because I knew I needed more room in the hip area. My next step was making the
skirt placket. I sewed the bottom edge right sides together, trimmed, and turned
it right side out. The placket will close with hooks and eyes. I sewed the eyes on
the placket before sewing the placket to the skirt. The placket is pinned to the
skirt and then sewn so that the eyes barely protrude the seam allowance.
Hercules assisted while I reread the placket instructions. I don't know why, I
was just confused. The instructions made sense, I just couldn't make sense of them
in my head for a while. To sew the placket, I took it slow and used the
hand wheel of the machine to make sure the needle didn't hit the metal eyes.
Then I sewed the right side facing. That's when I realized it was too narrow
to do a double fold, so I just zigzagged the raw edge. I sewed hooks to the right
side of the skirt opening. Both kitties felt the urge to lend their support as I
topstitched next to the seam line of the placket and right side facing. The
instructions said to do a prick stitch, but I was lazy.
Then I pinned and sewed the back seam closed up to the placket. Then Lucius
needed even more love, and I admit I appreciated the cuddles. Hercules had to
get in some cuddles too. On to the skirt ruffle. I pinned and sewed the ruffle
pieces together. Then I went ahead and hemmed the ruffle before gathering it.
Also, I elected not to line the skirt because I wanted to maintain a certain
amount of sheerness. I admit it freely that I sewed the hem on the machine. My
next step was pinning the ruffle to the bottom of the skirt and gathering it to
fit. Thor needed pets. To the machine to sew the ruffle to the skirt.
All right, my skirt is basically finished. I still have to put the waistband on, but
I'm going to wait to do that because I need to put my corset on and all of that
to check the fit for the waistband. Freya has a different style corset on
than my Edwardian corset, so I just want to make sure that it's going to fit
correctly. I also want to put the hip pad on and all of that before I
finalize that waistband on the skirt. So, the bodice. The bodice lining is done. I
still need to add the boating channels on the side seams, but other than that
it's done. The lining is done. I'm about to start putting together the outer
fabric and I'm using a different fabric than the skirt mostly because I had it
and I thought it was it was pretty and it went with the skirt well because the
skirt has these little raised dots on it and so does the bodice fabric, but the
bodice fabric also has these little, it almost looks like insertion, but it's not.
It's just little lines and I thought that would be very, very pretty for the
bodice. So, they match, they go together, but they're not exactly the same. That
also means, because the way this is made, it's not, the skirt and the bodice are
not actually sewn together. They're just attached with hooks and eyes, like you
attach the skirt to the bodice with hooks and eyes. So, I figure I can mix and
match. I can use this bodice with different skirts if I want to. So, I'm
getting going with the outer fabric for the bodice and I cannot find the pattern
piece for the sleeve lining. So, I think I might have to print those pieces out
again because I've searched and, I mean, let's be honest, my room is a disaster at
this moment. There is stuff everywhere and there's just, it's bad. So, that's
probably why I can't find it. I probably stuck it somewhere thinking, oh, I'm gonna
need this and now I can't find it. So, I may just print those pages out again and
for the sleeve lining and then I'll get going with that. I'm gonna use that same
wall, the plain wall, that I used for the bodice lining, for the sleeve lining and
yeah. I also can't find the waist, the skirt waistband pattern piece. They must
be together somewhere with Lucius or Hercules. I don't know where they are so I
might print that out again too. Although, I think I can just cut out a waistband
for the skirt. Hey, Mal. Are you telling me you don't have it? You don't have it?
You don't know where it is either? So, here we go. I sewed the bodice outer
fabric side seams and shoulder seams. Next, I pinned the collar to the neck
edge of the bodice. After sewing, I trimmed and clipped the curved seam
allowance of the collar. I made the placket for the bodice next and the
process is exactly the same as the skirt placket except you sew the top
closed right sides together instead of the bottom. I actually followed the
directions and used a prick stitch on the bodice openings next to the seam
allowance. Now to attach the bodice to the bodice lining. I pinned them together
at the neckline first.
Next, I pleated the bottom front of the bodice to fit the lining and pinned it
to the lining. Progress is being made on my dress. I have pinned the outer fabric
onto the lining of the bodice and there's a collar, a jabot collar, I
believe is what it's called, that I have to figure out or even decide whether
I'm going to use that collar. I don't know. Maybe, it's already cut out so at
least the outer, you know, the base layer of the collar is cut out. It's supposed
to have lace on it and I have some lace that I think would look pretty. However,
it has a really pretty edge and with the shape of the jabot, I wouldn't be
able to use that pretty edge unless I cut it or did some finagling of it and
I'm not sure how that would go. Anyway, I'm still thinking about that part of it
but I need to put the waistband on the skirt. I need to baste the lining
and the outer fabric together along the bottom edge and along around the arm
side and then after that put the lining and the collar and then attach the
waistband and then pretty much done except for the jabot, which I'm still
deciding on. So, yay! I basted the bodice to the lining along the waist and arm
sides. Then, I pressed the seam allowance under on the bottom edge of the collar
lining. My next step was pinning and sewing the collar lining to the collar
right sides together. I trimmed the seam allowance and flipped the lining to the
inside. The folded edge will cover the raw edges of the collar. I sewed the
lining down with a whipstitch. Then, I spent some time on the jabot collar. I
decided to make it separate from the bodice so that I can wear it or not as
my fancy takes me. I pinned and sewed lace to the base fabric. Back to the
bodice and time to tackle the waistband. I added some sew-in interfacing to the
lining. Next, I pinned the waistband fabric to the lining at the bottom edge
right sides together.
After sewing, I flipped the waistband right side out and topstitched along the
bottom edge. My next step was pinning and sewing the bodice waist to the waistband
outer fabric. I turned the waistband lining edge under and whipstitched it to
the bodice, covering the raw edges on the inside of the bodice. I realized I
had some eyelet left over from my combination, so I sewed the pieces
together and gathered them to attach it to the jabot collar. I pinned the
waistband to the skirt next and sewed it on. I turned it over and folded it to
cover the raw edges on the inside of the skirt. Back to the fancy collar! I
arranged the eyelet around the bottom edge of the collar. I checked out the
effect on Freya and experimented with more lace trim. More lace is always
better than less lace, right? I sewed the smaller lace trim on with a loose
running stitch. I wanted to make sure it didn't fold over onto itself. Then I
realized that I had forgotten to add the boning to the boning channels, so I did
that. To finish the bodice waistband, I added a skirt hook and bar. And now, the
sleeves! I did have some sleevels, but it was my own fault, not the pattern or the
instructions. I first assembled the sleeve lining. Next, I ran some gathering
stitches on the top of the outer sleeves. I pinned and sewed the outer sleeve seam
on both sleeves. After sewing the cuffs to the lining right sides together, I
began putting the lining and outer sleeve together, matching marks and
making sure things were lining up correctly. Another change I made was to
gather the bottom of the outer sleeve instead of pleat. It was just easier for
me. Then I folded the cuff up over the bottom of the outer sleeve. I sewed the
cuff down by hand. I started pinning one sleeve in. I then realized the opposite
sleeve was backwards. Luckily, I hadn't sewn the outer fabric or cuff on yet, so
I just zigzagged the raw edges and turned it out the opposite way. All it
means is that on my right arm, the seam allowance is against my skin on the
inside instead of against the inside of the outer fabric. No big deal. Sleeves in
and it's complete. I added a hook and bar to the skirt to close the waistband
and put the whole ensemble on. I am in absolute love with the floofiness of
this dress. I think it is so pretty and just summery and Anna Green Gables-y and
just, yeah, I think it's so pretty. I also wanted to say that if you want to make a
frothy, frilly Edwardian summer dress, go for it. You don't have to do hours upon
hours of painstaking insertion lace to have a pretty dress. I mean, if that's
your passion, by all means insert away, but a lovely ensemble can be achieved
with machine sewing and pretty fabric too. I don't suppose I can have an
Edwardian hot girl summer since I'm not single, but I guess I could have an
Edwardian hot married lady summer. Well, as it's too hot outside to take photos, I
will keep my hotness indoors in the air-conditioning for now. Thank you so
much for watching. I really appreciate you spending your time with me. If you
enjoyed this video, give it a like, subscribe if you haven't, and if you'd
like to be notified whenever I upload, you can hit that little bell icon. If
you'd like to support the channel further, I have a Ko-fi account and that
is linked down below. Stay tuned next week for some Edwardian accessories that
I am making and putting together for my day dress. I will see you again on our
next sewing adventure. Bye!
