Making Custom Bobbin Lace for My Blouse

Edwardian Threads
5 followers
27 Video Views·Jul 28, 2025
I take you through the process of making my own lace for a blouse I'm sewing. I couldn't find lace that matched my vintage doilies—the centerpiece of my design—so I decided to try my hand at bobbin lace. Using a simpler pattern from the book 101 Torchon Patterns, I wound the bobbins with white cotton crochet thread and began crafting the lace from scratch.
Last time I showed you that I sewed a blouse while telling you that I'm making some lace
for it myself.
The reason for that is that I just couldn't find any lace that fit my doilies.
And they are the centerpiece of my design.
But on their own I felt like they are just too few for true lace blouse.
So I decided to make my own lace.
And I might mention that this isn't the first time I'm trying my skills in bobbin lace.
Two years ago I first wanted to make some lace and my mother showed me how.
But soon I realized that the pattern I had chosen back then was too much of a challenge.
So this time I searched for something simpler and still matching the doilies and settled
on a torchon lace pattern from the book 101 Torchon Patterns.
I like the scallops at the sides since this pattern is similar in the design of the doilies too.
With the pattern in mind I started winding the bobbins.
I used a white cotton crochet thread which has approximately the same thickness as the
yarn used for the doilies.
I wasn't sure how much yarn I would need so I just wound them by gut feeling.
Once they were wound I pulled the thread through the caps.
I also prepared a pair of different bobbins, some without caps, that would mark the only
two bobbins which would not have a partner to go through the pattern.
Since bobbin lace is typically made of pairs of bobbins that are wound around each other.
But well, exceptions create the rule.
And to remind me of that I made them stand out.
And I felt like I had accomplished a big step once the first bobbins hung on the pillow.
I don't know why but preparing a project always feels like a huge accomplishment to me since
when I can't tell myself anymore that I first have to do a lot of other things before I
can actually work on it.
The printed pattern is pinned to the pillow and then the bobbins are pinned in place according
to the places they are needed.
I didn't record much of the first couple pattern repeats since I had some troubles
figuring out how it is done.
Despite knowing the schematic way to do it the first steps were stiff and I often worked
things backward in order to understand what I did wrong.
One thing I learned is to not work with bad lighting.
I had to re-do the work I did the night before.
Furthermore I realized that I have to tie the bobbin a little differently than I did
since I worked it so slow and clunky.
The bobbins just didn't roll as smoothly as I am used to watching my mother.
Once I made a little loop around the head of the bobbins they laid way flatter and didn't
tangle the yarn with each move I made.
This made the work a lot faster despite me being extremely slow in comparison to someone
trained.
While I started sewing the blouse I also worked on this lace almost each evening.
Luckily the sun stayed up longer and longer.
Once I had reached the 56 cm needed for the front piece I cut off each thread and tied
them into knots so that they don't unravel.
Usually I don't like cutting off a thread on a lace project but in this case I was excited
to finally hold the lace in my hand.
I finished the lace.
It's now the length of the front part like so.
A little less than 60 cm long.
And honestly I'm shocked of it.
I didn't believe that I would work that long on it.
No, that I have the perseverance to work that long on it.
But I did and now it's finished and I think it matches quite well to this lace doily I
have bought.
But I was far from being finished since while making the mock-up I had decided that the
blouse would benefit from some more lace.
Especially for tying in the volume of the sleeves in order to create a more flattering
silhouette.
So I restarted the whole process and made two more strips of lace.
The only difference was that I didn't feel as overwhelmed by the preparation of the lace
and was able to place everything in a third of the time.
These two lace strips were much shorter than the first one so they were completed quite
soon.
I only had to cut off the loose ends of the thread where a bobbin was empty and I had
to set a newer full one in.
Since I had laid the thread double for a couple of turns I didn't have to worry about making
knots to secure them.
One thing I had realized while making the lace is that the thread has a somewhat more
yellow tint than the doilies have.
So I decided to bleach them.
And thanks to some advice I got based on my questions on Instagram I did it with some
curtain bleach and normal washing powder.
Mixed with hot water I let them sit in there for a while and while waiting I also added
some antique laces that really needed some cleaning.
This way the washing lotion isn't wasted on just three strips of lace.
After some thorough rinsing I hung them to dry.
And while I was waiting for them to dry I went on with the blouse and sewed the doilies
to the shoulder pieces.
Since I had shortened the collar I had a little bit of lace pointing above it but I thought
it would look better than pointing over the shoulders.
I secured the lace with a running stitch in the areas where the lace is the densest so
that it is secure but almost invisible.
At some irregular intervals I also added a single backstitch so that I don't accidentally
pull the thread too strongly and create wrinkles.
I actually thought about removing the fabric beneath the lace as it was customary in Edwardian
time but I would have lost any structure provided by the shoulder pieces.
And especially at the shoulders I found this to be a bad idea.
The other laces I could have cut out but I decided not to in order to make it all fit
together.
Once the lace was dry I ironed them so that they are flat again.
Here is a quick comparison of how they looked before and after washing with the bleach solution.
In my previous video I have already shown how I have sewn in the lace for the front
since I wanted it to be secured in the seam allowances and it was finished long before
I had finished the other two.
I did this with the sewing machine and it was so annoying that I sewed those for the
arms on by hand.
But first I pinned them in the right place and created a box pleat on the top of the
arm where I would hide the raw edges of the lace and also create a slimmer silhouette
with that.
While sewing the lace on I released the box pleat since it was easier to sew.
And the last step was to close the box pleat for the width of the lace.
And this is how this blouse became a lace blouse.
Still not the freeliest out there but a rather plain one.
But I think that makes the lace even more interesting to me.
