Hand-Building Large Bowl

Ceramic Art Studio
35 followers
Dec 22, 2025
Hi guys, welcome back. My name is Jaspreet and today it's time for another tutorial.
Today I'm going to show you how I make this beautiful flower bowl. As you can see it's a
beautiful round bowl. This is actually a hand-built bowl which is made using a template. I will show
you a few different variations. Now when I say variations what I mean is the different stages
that you have to get to before you get to this one. So the first one will obviously be a straight
edge bowl which is the very basic. The second stage is when you add a little bit of volume
and you bring in the curves here. And third stage is when you add these little indents and create
petals. That's what I mean by variations. So that's what you'll be doing. In fact,
you'll see this variation here where I have about six of these petals or indents. Here's another
variation which has about eight of these indents. So you can make this shape. Again this is made
using exactly the same template. Let me just show you the difference between the two.
As you can see they're more or less the same. It's made using exactly the same template.
It's how you shape it, how you add the belly that will make a difference.
So that's the project for today. I hope you enjoy it. Let's get started.
All right so here's my clay slab rolled to a quarter of an inch in thickness. I've already
compressed the clay using a soft silicone. It's yellow silicone drip. I've already done
the compression. Now I'm going to bring in my template. This is the template that I use and
it is available for purchase. Obviously this is my version of the template.
Right so I'm just going to place the template here first and mark out the bowl form.
This template where exactly I need to add the texture. Now for texture I am thinking of using a
doily. I have this doily which I think will cover the entire surface. So yeah I think I'll use
this doily. I'm just trying to see which side is more prominent in texture. Place it here. Okay
yeah I think that works. All right I'm gonna place the doily here and now bring my pony roller
and then just start pressing the texture in. So once I'm happy with the way I've pressed it all in
it's time for texture reveal which is always amazing. Yay that's pretty. All right I'm
gonna just lift my slab a little bit and release it from the board. Then I'm gonna bring my template
again. The slab would have likely stretched a little bit. It's okay and again find where you
want to place. Remember this is going to be the top and this is going to be the bottom of your
bowl. Now starting with a needle tool I'm going to first cut the top here and the base.
Straight angles going in straight and holding on to the template and just cutting out
bowl shape. I'm missing on the inside as well the inner semicircle.
All right then bringing in a knife. I'm just going to cut this at an angle like this and then
come in here and you know change the angle. So this is going to be slightly tricky
because it's almost a circle that we're coming at. So here I'm making a bevel cut which is
an outward bevel cut right. So one of them will be out the other one has to be on the inside
leaning in. That's all okay. You can do it later also if it's too confusing for you
but there you go. I'm going to pull this out. Don't throw this away. You will need it to cut
out the base and just place it on the side here. Remove this. Now I'm going to get started with the
top first. Just clean the edge here. Clean it off with a damp finger. This clay is a stoneware clay
but has a little bit of grog. So I'm not using a sponge rather using my hand. Just smoothing out my
rim here. Okay actually it's better to bring a board so they can flip this easily. Yeah that
works. Okay so I'm going to move this onto another board so I'm able to flip the clay a little bit
more easily and move it around here. And then do the same on this side. This is going to be the
inside of the bowl because you have texture on the outside. Inside is going to be plain. Okay
and now I'm gonna score the sides here. I like to use a serrata drip dipped in water
and I create enough slip right here and do the same on this side. Just lift it up a little bit
and score nicely. Then put this bit back here. All right now it's time to attach the two sides.
Now if your clay is too soft and floppy let it set up. My clay is kind of okay. It is not too soft
and it's not too stiff. So it's at the perfect state. So I'm going to just bring the two sides
together like this. Overlap it. That's why we create the bevels. Okay and then I am just
doing this so you can see what I'm doing. I'm just lining the top and the bottom first
with the overlap. Then once that's done you're going to lift this and bring it
to a sitting position like this or standing position like this. Okay now you can check and
see if there's enough overlap. This is all good. All right you can see the joint here right.
I'm gonna first clean this up because I can see it. Just using a damp finger and cleaning it up.
You can use the back side of a clay knife as well. You can use your soft silicone drip as well to just
blend the two sides together. Okay so the inside is done.
Get rid of this here. Seal it all up. Okay now we have to do the same thing on the outside.
And for that I don't think I can really show you what I'm doing here. I'm basically doing the same
thing. Just pressing the two sides together making sure there's the overlap and then
attaching the two together. Right you will lose a little bit of texture here and that's okay.
Just make sure that your joint is secure that's all because you're going to be adding a little
bit of you know volume to the bowl here. It's better to just make sure that everything is
nicely joined before you start doing that. Okay now if you see the base is kind not exactly round
and to round off the base what you're going to do is there's a little trick that you can
do. You have to first turn this upside down. Okay yeah just do this. Ideally flip it not the way I
did it. Okay anyways once you have this here then I'm going to use my terracotta pot and
trying to bring everything to a little bit of a round here. Okay even the base just
turn this around in the pot to make it as round as you possibly can. Okay I think that looks
nice and round. Now what we're going to do is this round I'm going to measure quickly. In the template
you already have this but if you're like me sometimes you're taking stretch or something
you can just see which size works. This is three and a half and this is about three and a quarter
three and three quarters. So I think I'm going to go with this one right and then we'll take it off
and take off the excess if we need to. So bringing this slab here again which has already got the
texture. I'm going to move this out of the way bring this here that's why I said don't throw
away we need it. Using the three and three quarters having all this circle. Okay this can be used for
some other projects. We're going to move this out of the way. Now before I attach the two you can see
that it sits nicely. Before I attach the two I'm going to do a couple of things. One is add my signature
so just clean off a little area and then I'm going to just quickly clean off a little bit of the sides
here. You may need to you know take some of the clay off but for now I'm just cleaning whatever
I can and if you see this is not exactly a circle. My cookie cutter is slightly non-circular
so I'm just trying to bring it back into a circle because otherwise our pot will be
you know a little bit off. So trying to bring this to a circle I think that looks good now.
Take the board and I'm doing an abandoned wheel. Let's spoil the base here. I'm going to use my
serrated rib dipping water and I'm going to spoil fairly inside the circle not just at the edge but
I'm going slightly in as well you know because that's a smaller circle so then just putting
the slip back onto the clay surface right get this out of the way bring this guy here and do the
same. Now here what you're going to do is you're going to score the so this is at a little bit of
an angle so I have to score this nicely so it comes becomes nice and flat okay so spend a couple
of seconds just flattening the base off. Can you see how it's flattened? Now when you flatten it
automatically the circle also kind of becomes a little bigger just nice and flat and see I scored
fairly aggressively just making sure it's all level that's also the other thing I'm doing here
okay now I'm going to bring this and try and find the center and place it on top of this
now I can bring another board but before I do that I'm going to just
press if you need to get down to the table level to make sure it's you know kind of centered your
base and it's not off onto one side so I'm just pressing around here a little bit
around the edge okay now I'm going to bring another board place it on top here and then
flip I should have idly dumped this when I was flipping it over the first time around but
here you have your beautiful bowl you're done you do first stick the inside of the bowl to the base
and for that I'm going to use the back of a clay knife right what I'm going to do is so there are
two things you can do you can either make a coil and attach that on the inside or you can use this
guy and just kind of press like this can you see I'm just pressing a little bit of clay from the
top edge here there will be a little bit of edge so just pressing that in that's why you need a
slightly bigger slab of clay at the base there you go so that's one round done next round I'm going
to use my hands and just clean everything up seal everything up nicely and get rid of the
clay knife marks as well and that's a straight edged bowl done you can spend some time kind of
making sure that the edges are even and not slightly you know off and shape it but that's
one shape that you get with that template right let me just show you this is what it looks like
you can clean off the base again using a clay knife or a silicone tip tool or a synthetic
brush you can just clean off the base a little bit and this is the shape you'll get a straight
edged bowl right that's one stage now if you want to add a little bit of volume to add volume also
there are a couple of different moves that you can do I can do only one on this one and I'm
going to show you that one the one that I prefer and I like better so there are two things one is
using because this has a big wide mouth we can easily use a rib uh the rounded off rounded side
of a rib not the straight side the rounded side towards the wall and we can stretch it out like
this right create a belly this way the other option is to lift the belly up to lift the clay
like this okay using this motion I'm going to be using this motion where I'm going to be lifting
pushing the clay out and up so it's it's this motion basically so instead of doing this I'm
going to be doing this right why it gives a slightly different shape so when you're making
these try a couple leave one straight try it with this motion try it with this motion and we'll see
the difference they all give you a slightly different shape now when I'm doing this upward
motion I will have to hold on to the bowl wall like the base so this finger is going to hold
on to the base and this is going to hold on to the top so something like this and then I've just
quickly dunked it in water taken the excess off so it's nice and um moisturized it has a little
bit of water so it's easy to glide so I'm just holding on to the base and the top and then
pressing out like this okay so this is what I am doing there you go can you see it's keeping
the walls up but it's adding a little bit of that roundness yeah let me show you can you see that
roundness coming through right so this is just one way of doing it so I'm now going to again do
the same thing holding on to the base and the top supporting at least those two and then just going
up like this and if you need sometimes I'll use the entire hand the motion is upward motion that's
the only thing you have to remember it's not this motion and you'll see it'll give you completely
different results now I'm using the entire rounded side of the rib to do this let me just
finish this one round and I'll show you what this looks like okay can you see the shape changing I
know the rim is not entirely round it's okay we'll get to that but for now oopsie can you see it's
getting nice and round so I'm going to spend a couple more times do a few more of these upward
swings and then we will start working on the shape and I'll give you another version where
I'll add that floral that flower shape to it okay now I'm supporting it from the entire thing with
my hand like this I'm supporting like this once I've done that now I'm going to get down to table
level once and see if my bowl is kind of balanced looking balanced if it needs any more ribbing on
I can't I do feel a little bit of a imbalance like I can see it right here but I'm going to
get down to table level and check and see if this looks okay all right I think this looks good now
okay so once you're happy with the way this looks I'm going to try and round off the rim a little
bit clean it up and round it off before we move on to the next step this was you know kind of
version two first is a straight wall bowl and then we added a little bit of volume
okay now we're on to the third step okay this looks nice and round let me try and show you
what this looks like there you go can you see that oopsie you see that yeah so that's where
we are at now the next step is to add those little indents which make it into a little
flower shape okay now for that what we're going to do is I'm going to use my clay knife again
and let's start I mean you can start anywhere I'm just kind of trying to not make that little indent
around the join so I'm just seeing where the join is my join is right here so I'm going to start
at this point okay all I'm doing is taking my clay knife and sliding it underneath here okay
wherever till the point I can and then just slightly pressing this up bringing this up like
this and in here can you see just a little bit of an indent I've created here it's not too deep
but it's just going in like this and creating this little indent right here okay and then
I'm going to make one right opposite just to form more or less uniform
indents right you just go here and come here and then press a little bit just a tiny bit
I'm doing this two times at least so that you know the clay kind of remembers right now we're
just making these indents and then we will see so I'm going to make two more I think all right
one here one here and so once I have these two I can kind of see where the others will come
so I'm just marking those here and then just taking this and making a little bit of that
indent yeah these are not really perfect indents but they'll do so don't worry about it all right
so now what I'm going to do is I need something sharper than that you can use your
silicone rib for this just again place it here against the wall and press okay don't go all the
way in just lightly press to create this little indent here kind of sharpen it now you can just
do these indents just at the top and not go all the way to the base like I am that's also quite
possible all right now we have these now it's up to us how you want to kind of pronounce these what
you want to do with these so what I'm going to do is with a damp finger I'm just pressing this out
rounding this off and bringing this in rounding this off and bringing this in so I'm now playing
a little bit I can see it's not even that's okay just damping this and now it's up to you how
pronounced you want your uh petals to be yeah you can see these two are kind of bigger the rest are
more or less the same size so it's okay you know not too bad so now we'll shape it a little bit
right so I'm gonna again focus on the rim round it off a little bit like this
right so now you see that's my floral shape bowl let me just show you what it looks like from the
side right can you see that it looks really pretty then clean up the inside if you need to
so when you're drying these dry them outside don't dry them outside always dry them under a plastic
so that you get a nice even pot another thing you can do is I'm going to take my
rib and then again holding the top and the base I'm going to pronounce the
center of each of these just push out the centers a little bit you know this one do the same for
this one supporting from the outside and then pushing out the petal a little bit mostly the
center can you see I'm just pushing the center and not really doing every going over the entire
bowl surface again these are all design choices it's up to you how much of a you know round puppy
bowl you want can you see those little puffs coming up now in the sides so again you can
you know play around see what kind of shapes you like and then go from there so that's my
flower bowl oh that's so pretty I'm going to clean up the inside quickly
okay coming back to drying so this is going to dry really slowly under a plastic
don't leave it outside even when it looks like okay it's almost set I would suggest let it dry
slowly under plastic so that you know it stays nice and round and doesn't go out of the round
because I have faced some warping with these bowls because when I made a whole bunch of them
and I thought oh this is rock clay and you know they're not really much many joints here so it's
okay if I just leave them outside you know it's not okay to leave them outside so make sure that
you cover them with plastic and don't let them sit outside dry a week 10 days is what I will give it
before I let it sit outside in the open I'm just fussing around a little bit with a pot again
that's just okay now I'm happy with this I'm gonna leave it I will put in pictures towards the end of
what it looks like from you know different directions but that's our bowl I hope you
enjoyed the class and I will see you in the next one bye
