SpaceX Starship V3 Speed Up despite Challenges! China ZQ-3's Failure Revealed…SpaceWeekly#23 === 00:00: Intro 00:44: B19’s progress 04:00: Pad-2 and S39’s progress === #greatspacex#elonmusk#spacex#nasa == Advertisers who want to place ads on our channel, please contact the email manager: [email protected] === SpaceX Starship SN Be the first to sponsor us Thank you. https://www.patreon.com/GreatspaceX?fan_landing=true === SpaceX Starship V3 Speed Up despite Challenges! China ZQ-3's Failure Revealed…SpaceWeekly#23 Non-stop progress continues. SpaceX is accelerating production of the B19 stack, aiming to complete it within the next few weeks, and the path toward Flight 12 is becoming increasingly clear. Preparations at the launch pad are also moving forward as teams work through each remaining task. All of this and more on today’s episode of Great SpaceX. It is safe to say that SpaceX is accelerating its progress toward Flight 12, especially in the aftermath of the B18 incident. In a previous update, this rapid pace was demonstrated when SpaceX rolled four sections of Booster 19 within only five days. Even after that intense surge of activity, the company has continued to maintain a remarkably high rate of movement across the entire B19 stack. SpaceX Starship V3 Speed Up despite Challenges! China ZQ-3's Failure Revealed…SpaceWeekly#23 On the morning of December 2, SpaceX transported the next section, known as the A5:4 section, to Mega Bay 1. By the morning of December 4, the A6:4 section had also been moved into position. This second section appears to form the body of the liquid oxygen tank. With these components completed, the booster now has only the lower portions of the LOX tank left to assemble, followed by the engine bay and the forward sections that complete both ends of the vehicle. Before those final assemblies could begin, SpaceX moved the fuel transfer tube into Mega Bay 1 on December 6. This tube represents a significant redesign in the V3 booster compared with earlier versions. The new transfer tube is substantially larger, nearly equivalent in scale to the tube used in Falcon 9. Its size requires SpaceX to install it earlier in the assembly sequence before the booster is fully stacked. This change is not just a structural adjustment. It also represents a performance upgrade. The larger tube is expected to support the increased power and efficiency of the new Raptor 3 engines planned for Starship V3. It will also enable faster and more reliable flip maneuvers, along with the possibility of simultaneous engine ignition during critical phases of flight. SpaceX Starship V3 Speed Up despite Challenges! China ZQ-3's Failure Revealed…SpaceWeekly#23 Even without formal flight validation, the tube has already proven its resilience. In the B18 incident, the tube did not suffer severe damage. That performance reinforced SpaceX’s confidence in the design while also highlighting areas that can be refined as the company prepares for higher performance requirements. Once work on the fuel transfer tube was completed, attention turned to the LOX header tank. This component will attach to the lower end of the transfer tube. It was first seen through the narrow windows of the Starfactory on the evening of December 9. By the morning of December 10, it had been moved to Mega Bay 1 as well. Assembly of this tank is expected to begin shortly. ---- We use images and content in accordance with the YouTube Fair Use copyright guidelines: https://www.youtube.com/intl/en/about/copyright/fair-use/ Any questions about copyright please send us via Gmail: [email protected] To be resolved, thank you.
Non-stop progress continues. SpaceX is
accelerating production of the B19
stack, aiming to complete it within the
next few weeks. And the path toward
flight 12 is becoming increasingly
clear. Preparations at the launchpad are
also moving forward as teams work
through each remaining task. All this
and more on today's episode of Great
SpaceX. It's safe to say that SpaceX is
accelerating its progress toward flight
12, especially in the aftermath of the
B18 incident. In a previous update, this
rapid pace was demonstrated when SpaceX
rolled four sections of B19 within only
5 days. Even after that intense surge of
activity, the company has continued to
maintain a remarkably high rate of
movement across the entire B19 stack. On
the morning of December 2nd, SpaceX
transported the next section known as
the A5 to4 section to Mega Bay 1. By the
morning of December 4th, the A6 to4
section had also been moved into
position. This second section appears to
form the body of the liquid oxygen tank.
With these components completed, the
booster now has only the lower portions
of the liquid oxygen tank left to
assemble, followed by the engine bay and
the forward sections that complete both
ends of the vehicle. Before those final
assemblies could begin, SpaceX moved the
fuel transfer tube into Mega Bay 1 on
the 6th. This tube represents a
significant redesign in the V3 booster.
Compared with earlier versions, the new
transfer tube is substantially larger,
nearly equivalent in scale to the tube
used in Falcon 9, its size requires
SpaceX to install it earlier in the
assembly sequence before the booster is
fully stacked. This change is not just a
structural adjustment. It also
represents a performance upgrade. The
larger tube is expected to support the
increased power and efficiency of the
new Raptor 3 engines planned for
Starship V3. It'll also enable faster
and more reliable flip maneuvers along
with the possibility of simultaneous
engine ignition during critical phases
of flight. Even without formal flight
validation, the tube has already proven
its resilience. In the B18 incident, the
tube did not suffer severe damage. That
performance reinforced SpaceX's
confidence in the design while also
highlighting areas that can be refined
as the company prepares for higher
performance requirements. Once work on
the fuel transfer tube was completed,
attention turned to the liquid oxygen
header tank. This component will attach
to the lower end of the transfer tube.
It was first seen through the narrow
windows of the Star Factory on the
evening of December 9th. By the morning
of the 10th, it had been moved to Mega
Bay 1 as well. Assembly of this tank is
expected to begin shortly. Following
this stage, SpaceX will need to move
only a few more structural sections. The
final two end sections will arrive and
be integrated, which will bring the B19
production sequence to completion. If
this pace holds, the entire B19 stack
could be finished within 1 to two weeks.
This rate of progress is significantly
faster than what many observers
expected. After the B18 incident, there
were widespread assumptions that the
booster's schedule would slip
considerably. Even when SpaceX stated
that B19 would be stacked in December,
many predictions still anticipated final
production extending into January of
next year. However, beginning in late
November, SpaceX increased the
operational tempo and has sustained that
remarkable speed through the present. If
production concludes within the next two
weeks, the company will likely end the
year with a cryogenic test. That
timeline would allow the first half of
January of 2026 to focus on engine work
and static fire campaigns, opening a
realistic window for a flight 12 launch
opportunity in late January. For flight
12 to occur in the near term, the rapid
progress on B19 is only one part of a
much larger effort. Every system
involved in the launch campaign must
advance in parallel, and one of the most
significant developments is now taking
place at Starbase Pad 2. This new launch
mount will serve as the next generation
platform designed to support Starship V3
and its installation continues to move
forward with visible momentum. The most
notable additions is the SQD system
which has recently been positioned as
part of the broader integration work.
While the remaining smaller components
are prepared for installation, SpaceX
has been conducting continuous testing
at the pad. The most prominent of these
tests is the flame trench deluge system
which is designed to protect the pad and
vehicle by dispersing vast amounts of
water to mitigate heat and pressure
during major tests or launch events. The
latest deluge test occurred on the
afternoon of the 10th and this test was
not an isolated event. SpaceX conducted
another test on the 9th and an earlier
one on the 5th resulting in three
full-scale deluge activations within a
single week. Although most views of
these tests come from a considerable
distance, making the system strength
harder to appreciate, alternative
footage recorded from closer vantage
points offers a clearer understanding of
the systems power. In the most recent
image taken from a position facing one
end of the flame trench, the force of
the water becomes unmistakable. The
spray reaches a significant height and
the volume expelled from the nozzles
demonstrates the systems readiness to
support much more powerful vehicles in
the future. Its first operational
customer will be B19, the prototype
advancing through production at
remarkable speed. Equally important to
the flight 12 schedule is the progress
of S39. Recent activity at Meabay 2
shows that its stacking phase is
essentially complete and its heat shield
system stands out as an impressive
testament to SpaceX's ambitious goals
for the V3 generation. With this level
of completion, it's reasonable to expect
that S39 may roll to the Massie test
site as early as next week for cryogenic
testing. The SQD system has been
installed on the test stand for an
extended period and appears fully
prepared to support these operations. If
cryogenic testing concludes successfully
in the third week of the month, S39
could begin static fire testing in early
January. This sequence will proceed
without delay from B19's schedule
because the booster and ship conduct
their static fires at separate
facilities. Taken together, the steady
advancement of S39 and the rapid
development of pad 2 align to reinforce
the expectation that flight 12 can
reasonably launch in January. The next
series of tests will showcase how the
Starship system begins to demonstrate
its evolving capabilities. And all eyes
will be on how these critical phases
unfold. Three Starship launchpads are
now in motion, and the newest
development comes from Florida, not
Starbase. With approval granted for
Starship operations at SLC37, SpaceX has
unlocked a major expansion in the center
of the world's aerospace hub. It's a
milestone that signals a dramatic
increase in future activity and a new
level of ambition for the program. How
transformative is this approval? And
what challenges must still be overcome
before operations accelerate? SpaceX is
implementing major upgrades across all
of its Starship infrastructure, both at
Starbase and in Florida, especially now
that the V2 era has officially come to
an end. Pad 2 at Starbase is expected to
become operational soon, followed by
launch complex 39A at Kennedy Space
Center and Pad 1 back at Starbase. Yet,
while these locations have been the
center of attention for months, another
site has remained unusually quiet. That
site is SLC 37. For most of the year,
SLC37 has shown little visible change.
After SpaceX announced it would take
over the launch complex, the most
notable activity was the demolition of
the former ULA building. Once the debris
was cleared away, progress appeared to
come to a halt. However, that silence
was not due to inactivity. It was
because SpaceX's long-term development
plans for the complex were undergoing a
detailed review. Now, that quiet period
is officially over. Starship operations
at SLC 37 have been fully approved.
SpaceX confirmed the news directly,
stating, "We have received approval to
develop space launch complex 37 for
Starship operations at Cape Canaveral
Space Force Station Construction has
started." The company added its
appreciation to the Department of the
Air Force, Space Launch Delta 45, and
the US Fish and Wildlife Service for
their roles in completing the
environmental review. Musk followed his
own message, congratulating the SpaceX
team and thanking the US Space Force.
This approval involved many powerful
agencies. Unlike LC39A, which leans
heavily toward NASA missions, SLC37 is
under the authority of military
organizations, specifically the US Air
Force and the US Space Force. Their
involvement signals that this site will
support a very different category of
missions. SLC37 is poised to become a
dedicated hub for national security
launches instead of primarily supporting
scientific or commercial flights. SpaceX
made that intention clear, saying that
with three Starship pads in Florida, the
company will be prepared to support
America's national security needs as
well as the Aremis program. The
inclusion of the US Fish and Wildlife
Service also highlights the
environmental challenges associated with
building new launch infrastructure and
SpaceX's efforts to address them
head-on. Access to national security
missions represents a massive
opportunity for Starship. This is the
same sector where Falcon rockets have
completed competed fiercely with ULA and
more recently Blue Origin. Once Starship
is ready to enter this arena, SpaceX's
influence will expand even further.
Unlike commercial launches, national
security missions typically come with
long-term highv value contracts. If
Starship demonstrates capability and
reliability, these contracts will bring
not only revenue but also increased
trust, which is crucial for the
vehicle's future development. As for
construction, SpaceX has already begun
work at SLC 37. With demolition
finished, crews can now begin preparing
the site for two full Starship launch
pads. SpaceX has provided a high-level
overview of the design. First, large
foundation pits will be excavated. Steel
reinforcement and massive concrete pores
will form the base structure for each
launch tower. After the tower
foundations are complete, tower segments
will arrive and be stacked one by one.
Mechazilla arms will then be attached,
which will eventually enable catching
operations. Alongside tower
construction, engineers will build the
flame trench. This involves digging a
deep wide cavity, installing a steel
framework, and pouring concrete to form
the core structure. Eventually, the
flame bucket will be installed inside
the trench. Once the trench and tower
base are ready, teams will begin
creating the above ground systems,
including the OOLM platform, the booster
QD frame, and all necessary plumbing.
After that, the full OM and QD systems
will be installed. Small elements such
as cabling, valves, and monitoring
equipment will be added throughout the
build. Although this overall process
reflects earlier Starship pad
construction methods, SLC37 is unique
because SpaceX is building two complete
Starship pads simultaneously at the same
complex. This is something the company
has never done before. It truly
represents a two towers development
effort. Because this is a brand new dual
pad construction, the timeline is
expected to extend into mid 2027. The
scale is far larger than any pad build
SpaceX has attempted in the past, but
the company now has enough experience to
move quickly and efficiently. Once
completed, the SLC37 site will
dramatically expand SpaceX's launch
capacity. Counting all three Starship
pads in Florida along with the two at
Starbase, SpaceX will have at least five
operational Starship launch pads. No
other rocket family in history has ever
had this level of infrastructure.
Currently, the Falcon fleet operates
from three pads, LC39A, SLC 40, and SLC
4E with SLC 6 potentially being added
soon. The addition of five Starship pads
will position SpaceX with the largest
and most capable launch network in the
world. In terms of raw capability,
Starship will become the rocket with the
most launch pads in operation globally,
surpassing Falcon's 3 and far exceeding
typical launch systems, which usually
operate from one or two pads. The number
of pads alone gives Starship tremendous
potential for highfrequency operations.
Falcon rockets prove this today. With
only three pads, Falcon has already
become the world's most frequently
launched rocket family, surpassing 150
flights this year. As more pads come
online, that number will only rise.
Starship will take this concept much
further. SLC 37 is planned to support up
to 76 Starship launches per year, which
means up to 152 landings since both the
booster and the ship will return. This
kind of launch rate is unheard of. It
reflects the systems design as a fully
reusable fast turnaround vehicle, unlike
Falcon boosters, which still require
more extensive refurbishment between
flights. And SLC 37 is only one part of
the system. LC39A is expected to support
around 44 Starship launches per year.
Starbase may eventually support 25 or
more. Combined, these numbers reveal the
launch cadence needed for future
missions. Building an orbital refilling
system for deep space missions will
require dozens of Starship flights in
rapid succession. Sending fleets of
ships to Mars during favorable windows
may require up to 10 Starship launches
per day across multiple pads. Starship's
infrastructure is being designed to make
such ambitions feasible. Landing
operations will be even more active.
Since each Starship flight involves two
returning stages, landing events will
happen at twice the frequency of
launches. SLC37's design includes
numerous landing zones, and Starship may
also use offshore drone ships for
additional recovery capacity. Once all
pads are operational, the landing
network will be one of the busiest
rocket recovery systems ever created. If
you're excited for what comes next,
respond with the word unbelievable in
the comment section down below. Then
don't forget to like the video and
subscribe to the channel to continue
following SpaceX's incredible
development journey. SpaceX now faces a
wide range of new challenges as it moves
forward. Even with approval from major
government and military agencies, there
are still significant hurdles ahead,
particularly from its competitors in the
launch industry. Rival companies will
certainly be concerned about the
aggressive launch cadence SpaceX is
planning for Starship. Their first
concern will be congestion. A system
that launches and lands as frequently as
Starship will require constant transport
of rockets, fuel, and support equipment.
This level of activity can interfere
with nearby operations and disrupt
scheduling for other launch providers.
Aerospace management will also become
far more complicated. Starship will
launch often, but it will also perform
continuous returns, which is something
no other company does at such scale.
This will force aerospace restrictions
that competitors may pressure regulators
to limit or adjust. Another concern will
be the environmental and mechanical
impact of frequent Starship operations.
A rocket with such immense thrust
launching many times per year can create
strong vibrational effects across the
region. Competing companies may claim
that these effects risk damaging their
infrastructure or launchpads. On top of
that, many providers will worry about
market pressure. A powerful, fully
reusable system like Starship launching
at a high rate could overshadow their
vehicles. This could reduce their
chances of earning major government
contracts or commercial opportunities.
Because of these factors, it's likely
that competing companies will attempt to
impose restrictions on Starship, such as
limiting the number of launches allowed
each year or placing constraints on
launch windows and landing schedules.
This is not a challenge SpaceX can solve
alone. They will need support from
agencies such as the US Space Force,
NASA, and DoD, as well as the FAA in
order to protect the operational
flexibility needed for Starship's future
missions. How this balance plays out
remains to be seen. The second major
challenge comes from within SpaceX
itself. The number of Starships required
to sustain the company's vision will be
extremely high. To support a heavy
launch cadence from Florida, SpaceX will
need a constant supply of vehicles. In
the early stages, they will likely
transport ships and boosters from
Starbase. However, long-term operations
demand local production. Florida must
eventually become autonomous. That means
a full manufacturing ecosystem will be
required on site. So far, only the first
structure, the Gigabay, has begun
construction. More Star Factory
buildings will be needed to achieve
steady production. Manufacturing systems
take time to build, often more than a
year. So construction must accelerate
quickly if Florida is to support lunar
and Martian missions beginning around
2027. Without local production, launch
operations in Florida will not be able
to operate at the scale planned. Another
critical factor is fuel. A launch system
as active as Starship requires huge
quantities of liquid methane and liquid
oxygen. SpaceX will need an extensive
transport network or ideally a dedicated
fuel production facility near the launch
site. Creating that kind of
infrastructure is essential because
supply interruptions could bring
operations to a halt. Proper storage,
cooling, and delivery systems must be
built now to ensure steady fueling for
dozens of launches and landings every
month. Altogether, these challenges
reveal how many logistical systems must
be strengthened before Starship can
operate at full capacity. SpaceX has
received the green light to build and
launch at SLC37,
but approval is only the beginning. To
prepare for the active future they
envision, SpaceX must build production
lines, expand fuel supply operations,
strengthen partnerships with government
agencies, and navigate competitive
pressure. The work must begin
immediately because the timelines for
national security missions, Artemis
support flights, and eventual Mars
operations are approaching fast.
Starship stands alone in scale and
ambition, and the expansion to SLC 37
with two dedicated pads marks a profound
leap in its operational reach. Before
long, this site will transform into
another active hub, launching and
recovering the world's largest rockets
in a steady, relentless cadence. It'll
serve as a gateway to the moon, Mars,
and destinations once confined to
imagination. Nothing in modern aerospace
comes close. As SpaceX pushes through
each obstacle, a new era draws closer.
And when it arrives, the only question
is whether you are ready to see it
unfold. Flight 12 will mark the first
mission of 2026. And it'll also
introduce the newest version of
Starship. Although many have stated that
this mission will follow the same
procedures used during the version two
flights, the reality is quite different.
Significant upgrades and structural
changes will make this flight far more
challenging than it may appear. These
changes raise important questions. How
difficult will Flight 12 truly be? And
can SpaceX navigate the technical
hurdles that lie ahead? Again, it's
widely understood that the procedures
for Flight 12 will remain unchanged. On
the surface, that sounds simple.
However, the mission will be far more
difficult than it appears because the
real challenge comes from entirely new
factors introduced with this version of
the vehicle. Even before Starship takes
to the sky, we can already see the
complexity ahead. The issues with B18
have provided a clear warning. During a
stress test conducted before the
cryogenic loading test, B18 failed
violently. The liquid oxygen section was
torn apart and the methane tank was
significantly distorted. This incident
highlighted an important truth. The
structural stability of Starship V3 will
be a major obstacle for SpaceX,
especially on its debut flight. Once the
vehicle transitions from ground testing
to a full mission profile, everything
becomes more demanding. Cryogenic
propellant will be loaded into the
tanks. The engines will run at full
power. Every system will experience
extreme conditions for or an extended
period. The margin for error narrows
dramatically once the countdown begins.
The most difficult aspect, the most
difficult aspect is that this is the
first flight. SpaceX has no prior
realworld experience with many of the V3
upgrades. There are no previous flights
to help reveal hidden issues or guide
refinements. New fuel tank
configurations, redesigned fuel routing,
or structural reinforcements all remain
unproven in actual launch conditions.
This lack of flight heritage creates
uncertainty throughout the vehicle's
operation. Because of this, SpaceX has
only one reliable method to reduce risk.
The company must inspect, test, and
verify every component through cryogenic
tests, static fires, and countless
ground checks. Both stages require the
same level of scrutiny since any failure
at any phase of the mission could
jeopardize the entire flight. S39 is
expected to roll out in the coming days
now that stacking is complete. B19 will
likely remain at the production site
until early next year. Both vehicles
will undergo extensive checks informed
by the lessons learned from B18's
failure. These insights will be
essential to ensure structural margin
and operational readiness before the
official flight. Beyond the issues that
have already appeared in testing, there
are also challenges tied to the new
features and upgrades. A major example
is the engine. Beginning with flight 12,
SpaceX will employ the Raptor 3 engine.
This engine has been in development for
some time, and it includes several major
improvements. It provides significantly
higher thrust, reaching approximately
280 tons at sea level and around 306
tons in vacuum. Its design is more
efficient, made possible by removing by
removing or integrating many smaller and
more delicate components. These
improvements are intended to raise
performance, reduce risk, shorten
production time, lower costs, and
streamline refurbishment. Yet, despite
these advantages, Raptor 3 introduces
several new difficulties that SpaceX
must navigate. The first major challenge
is the increased thrust. More power
means that controlling the vehicle
becomes more complex. The timing of
various flight events changes.
propellant consumption changes, the
forces exerted on the structure
increases and SpaceX must balance these
factors carefully, especially during
ground tests such as the static fire
campaign. These tests will be key to
validating engine performance under
controlled conditions. Higher thrust
also increases the risk to ground
systems and the vehicle itself. While
the launch of a structure has already
received upgrades, including a new flame
trench and reinforced structures, the
first use of a new engine version always
carries uncertainty. Miscalculations or
unforeseen interactions could still
cause damage. SpaceX will need to
inspect these systems thoroughly during
testing to ensure readiness for the
flight. Another challenge comes from the
engine's simplified design. While
simplification improves long-term
reliability, it also creates
difficulties during inspection. Welded
structures replace the previous flanges
and bolts. This means that if engineers
suspect an internal issue, they can no
longer simply detach sections for
examination. Instead, they must cut into
the engine. In practical terms, if an
engine requires cutting, it's almost
certain that it will not be used on a
flight vehicle. This increases the
importance of catching problems early
and understanding how new internal
geometry behaves in different operating
regimes. The redesigned fuel injection
and combustion processes introduce
further complexity. Although they
promise higher efficiency, SpaceX must
still verify that these new cycles
operate safely and predictably under
flight conditions. As with any major
propulsion change, there's no substitute
for realworld experience. Overall, the
engines which truly represent the core
of the rocket will be one of the most
significant challenges in the first
operational campaign of Starship V3. Now
we can separate the discussion into the
two stages. The Superheavy booster
carries several notable upgrades. One of
the most prominent is the revised hot
staging system. The new design takes
inspiration from the hot staging
approach used on the Soviet N1 rocket.
However, SpaceX has introduced
meaningful modifications. The new
hardware is mounted directly onto the
booster instead of being installed as a
separate ring. It's lighter, simpler,
and does not require jettison during
flight. Its extended structure allows
for improved heat dissipation and
smoother venting of pressure from the
upper stage engines during separation.
This redesign reduces mass, simplifies
manufacturing, and improves reliability.
However, it also introduces its own set
of risks since no version of the system
has yet been tested in flight. The
structural loads during separation, the
thermal environment, and the aerodynamic
forces acting on this new configuration
remain unproven. Light 12 will be the
first opportunity to validate whether
this redesigned interface functions as
intended. All of these factors combined
to create a mission that appears simple
on paper, yet presents some of the most
difficult challenges SpaceX has ever
faced for Starship. The new hot staging
hardware introduces meaningful
capability, but that capability also
creates challenges that SpaceX must
address. The larger venting area allows
exhaust energy to escape more forcefully
toward the lower portion of the booster,
including the grid fins. Even though the
grid fins have been positioned lower
than in the previous design, they will
still be exposed to greater heating and
pressure loads. Any unexpected stress on
the grid fins can influence navigation
stability and the booster's ability to
decelerate in a controlled and
predictable manner. Another difficulty
introduced by the revised hotstaging
system is its impact on the booster's
ability to perform an active flip. In
the earlier design, SpaceX placed the
hot staging vent to one side. This
allowed them to use the upper stage
engine thrust to push the booster in a
specific direction during separation,
thereby conserving propellant and
improving efficiency. In the new
configuration, that directional benefit
becomes far more difficult to achieve.
SpaceX may have to rely more heavily on
ships gimbling engines during the
separation sequence, which adds
additional complexity during a critical
moment of the flight. Looking farther
down the booster, the grid fins
themselves have undergone significant
redesign. In V3, both the size and
number of grid fins have been reduced. A
change in size naturally results in a
change in mass, which affects the
aerodynamic behavior of the booster,
including its navigation during descent
and its ability to shed velocity
efficiently. The reduction from four
grit fins to three introduces a new
asymmetry, leaving one side of the
booster without a fin. Although SpaceX
has stated that navigation accuracy will
not be compromised, the possibility of
imbalance remains a real concern,
especially during early test flights
when unpredictability is at its highest.
Even though B19 will still perform a
water landing instead of attempting a
catch, it must still achieve precise
control throughout its descent. The V3
booster will eventually need to land
directly into the Mechazilla arms, just
as previous booster versions are
expected to do. Achieving this precision
begins now during these early flights.
Every change to the grid fin system from
mass distribution to aerodynamic
authority must be validated under
realworld conditions. It's also
important to remember that the new grid
fins have an integrated catching point.
This means that the structural elements
responsible for supporting the final
catch are now part of the fin assembly
itself. This integration increases
efficiency, but it also requires greater
protection and durability since even
minor damage could compromise the
booster's ability to be safely caught in
future missions. The next flight will
serve as the first true test of the
durability of this integrated design.
Now, we can shift to the upper stage
where the upgrades are less visible but
more intricate. The most critical system
on ship is the heat shield. Recent
images of S39 show a fully tiled intact
shield that appears structurally
consistent. It seems that the V3 design
will not continue the experimental
metallic tiles seen on earlier test
articles, nor will SpaceX intentionally
remove tiles for stress testing
purposes. Instead, the shield will be
configured exactly as required for
operational flights. Some other
refinements include the use of a crunch
wrap technique to fill gaps between
sections of the vehicle along with
possible improvements in tile
composition to increase durability.
However, these updates remain
expectations until proven in flight. The
heat shield will face its first true
test during re-entry where temperatures
and pressures will reach extreme levels.
While engines, tanks, and structures can
undergo repeated ground tests, the heat
shield has no substitute for real
atmospheric re-entry. It must protect
the vehicle throughout the heating
phase, ensuring that ship reaches a
stable flight state for its landing
burn. The success of this landing will
lay the foundation for future attempts
to catch ship during the Mechazilla
arms. Not only must the vehicle survive
re-entry, but the heat shield itself
must remain largely intact. This is
essential for future rapid reuse. A
shield that requires extensive rework
after every flight would hinder
turnaround time and reduce operational
efficiency. The first V3 flight will
therefore be the hardest test the heat
shield has ever faced. Beyond the tiles,
other sensitive systems on ship will
introduce their own challenges. A prime
example is the aft flap. These large
aerodynamic surfaces, These large
aerodynamic surfaces endure intense
heating during re-entry because of their
broad surface area and exposed
positioning. Protecting them has always
been difficult, but V3 raises the stakes
even further. Damage that might have
been tolerable during earlier test
flights is now far less acceptable. The
first operational V3 mission must prove
that the flaps can withstand the full
full thermal and aerodynamic environment
without significant degradation. Lastly,
the ground infrastructure also plays a
critical role in the success of this
debut flight. The launch site has
undergone extensive modifications. The
new orbital launch mount paired with the
upgraded flame trench was designed to
reduce the mechanical and thermal impact
on the vehicle and the pad. These
changes aimed to provide long-term
reliability and allow the system to
support repeated Starship launches
without sustaining major damage.
However, this will be the first time
this configuration supports a launch,
and it must handle the most powerful
launch vehicle in the world. Any failure
or miscalculation could damage the pad,
delay future missions, or affect vehicle
safety. Just like the vehicle itself,
the ground system must be validated
through static fire testing, and refined
as necessary. All of these factors
illustrate that while the V3 upgrades
promise higher performance and greater
efficiency, they also introduce
substantial challenges. Flight 12 will
be the moment where every new feature,
every redesigned system, and every
structural improvement is tested under
real conditions. It'll be one of the
most demanding milestones in Starship's
development. A few days ago, China's
first reusable methylox rocket, the Zhu
3, lifted off for its highly anticipated
test flight. The booster climbed
smoothly, but during its return attempt,
it broke apart in a dramatic explosion.
Since then, many have been asking what
happened in the final moments of the
mission. Those questions can now be
addressed. Landspace has released the
complete onboard footage and the new
video offers clear and detailed insight
into the sequence of events that led to
the failed landing. So why did the JU 3
booster fail to touch down successfully?
And how significant will SpaceX's
influence be on landspace's next steps
as they move forward? Ju 3 is a methane
and oxygen rocket, a propellant
combination that represents one of the
most significant technological shifts in
the modern aerospace industry. This new
generation of methyloxs vehicles is
designed to offer higher performance,
cleaner combustion, and better
reusability potential. For that reason,
Zuwaye 3 is often mentioned alongside
other major reusable rockets such as
SpaceX's Starship and Blue Origin's New
Glenn. After the successful flights of
XUe 2, land space set an ambitious goal
for its next vehicle. They want ZU 3 to
reach orbit reliably and also recover
its booster for refurbishment and reuse.
That objective is the foundation of the
current development program, which is
why the recent booster landing failure
has drawn so much interest. On launch
day, the available footage only showed
the final descent of the booster.
Viewers saw the grid fins deployed, the
booster attempting to orient itself, and
then a sudden violent explosion. But
this left a major question. What
happened before that moment? Was there a
hidden issue earlier in the flight that
contributed to the failed landing
attempt? Landspace has now released new
onboard footage that captures the
critical phases of the mission from
multiple perspectives. This video is
extremely valuable because onboard
cameras provide a controlled close-up
view of how a vehicle behaves in flight.
Such footage reveals subtle details that
are often missed by groundbased cameras,
especially during rapid maneuvers or
high altitude operations. The first set
of new footage comes from the second
stage. In this view, we see the moment
the two stages separate. The separation
process appears smooth and well
executed. Instead of igniting the second
stage engine immediately at the moment
of separation, 3 seems to use small
thrusters to create gentle spacing
between the stages. This approach can
slightly reduce overall performance, but
it avoids sending powerful engine
exhaust directly into the forward
section of the booster, which prevents
thermal damage and structural stress.
After a brief pause, the second stage
engine ignites cleanly, and we already
know the outcome. The second stage
reached orbit successfully, which is why
Zuche 3's debut flight is still
considered a partial success. However,
the real story is the booster.
Fortunately, Lance Space equipped the
booster with its own onboard camera. In
that footage, we see the grid fins
deploy as expected. These aerodynamic
services allow the booster to steer
itself, control its descent path, and
reduce speed. The grid fin deployment
appears flawless, and the booster
maintains stability for a considerable
period. Ground footage confirms this
behavior, showing a glowing plume at the
booster's rear that indicates a stable
boost back burn. This means the engine
was functioning correctly during the
early phases of the return sequence. As
the booster descends closer to the
ground, the grid fins begin to move more
aggressively, adjusting the booster's
trajectory for a targeted landing. The
vehicle transitions from horizontal
flight to a vertical orientation.
Everything at this point appears
consistent with a nominal landing
procedure. But the moment the landing
burn begins, everything changes. The
onboard footage abruptly ends and the
ground footage completes the story. As
soon as the engines ignite for the final
braking maneuver, a failure occurs
almost immediately. This confirms the
earlier conclusion that the landing burn
was the root cause of the accident. So
what went wrong inside the engine at
this decisive moment? Based on the
visual evidence, the booster experienced
an abnormal combustion event. In
aerospace terminology, this is known as
a rapid unscheduled disassembly, a
catastrophic failure triggered by engine
instability. A likely cause is a leak
during the demanding phases of re-entry
and descent. The engine's plumbing
system may have overheated, cracked, or
even been compromised. A leak can occur
in propellant lines connecting the tanks
to the engine. When super cold methane
or oxygen escapes under high pressure,
it can ignite instantly. The resulting
flash fire can spread rapidly throughout
the engine bay. The footage supports
this theory. Flames appear at the lower
end of the booster and intensify
quickly. The fire climbs upward as fuel
continues to feed it. Thick, dark smoke
forms in the final seconds, indicating
that structural components and
insulation materials were burning. Once
the fire compromised the engine section,
the booster lost control authority. It
entered freef fall without the ability
to slow down, leading to the final
explosion. These observed issues include
ignition instability, fuel flow
irregularities, and leaks.
Interestingly, these same three
categories of failures were recently
identified in Blue Origin's New Glenn
booster during its own landing attempt.
However, there is a difference. New
Glenn's ignition issue prevented the
engine from restarting, while Zuju 3's
ignition instability appears to have
caused a chain reaction that destroyed
the entire engine compartment. Even so,
expectations remain high for Lancepace.
They now have detailed data from this
attempt. Combined with experience gained
from JU 2, these lessons will help guide
them toward achieving their first
successful booster recovery. Many
believe they can accomplish this goal
sooner rather than later. So, do you
think Landspace will succeed on their
next attempt? Let me know with a yes or
a no in the comment section down below.
Then, don't forget to like the video and
subscribe to our channel to follow the
continuing development of SpaceX and the
global race toward full reusability. To
me, a successful landing on the next
attempt is absolutely possible, and
there are several encouraging indicators
that point in that direction. As
mentioned earlier, the final phase of
the Zucho 3 booster descent ended in a
loss of control. However, when we
examine the available imagery after the
flight, a clearer picture emerges. It
appears that the booster came down very
close to the intended landing pad. Even
though the vehicle ultimately crashed,
the impact zone was located near the
approach path to the pad. Later
photographs taken after cleanup efforts
revealed black charred debris scattered
along the ground. These markings allow
us to determine that the crash site was
positioned slightly outside the
designated landing zone. And
unfortunately, it was located along the
primary access route to the pad.
Although this area would certainly have
been cleared of personnel and vehicles
during landing operations, the crash
likely created temporary complications
for ground support systems who had to
maneuver equipment around the damaged
terrain afterward. However, the key
point lies in the booster's proximity to
the landing zone. Even though it lost
control during the final moments, the
booster still reached a location
relatively close to where it was
supposed to land. This detail reveals
something important. It shows that the
guidance system had successfully
positioned the booster for a precise
landing long before the landing burn
began. The navigation sequence, the
trajectory shaping, the orientation
adjustments, and the grid fin work had
all been effective. This means that
aside from the engine failure during the
landing burn, Zuche 3's descent profile
performed well above expectations. The
vehicle was accurately tuned to reach
the correct landing corridor before the
malfunction occurred. If the engine
problem had not developed, we might have
witnessed one of the most remarkable
first attempt landings in modern rocket
development. Because of this, it's
reasonable to believe that a successful
landing on the next attempt is within
reach. Landspace possesses flight data,
analysis tools, and now a clear
understanding of what went wrong. And
these factors will help guide their next
steps. But this brings us to a larger
question. What role does SpaceX play in
Landspace's path forward? At a glance,
SpaceX might seem unrelated to the Zuche
3 landing failure, but in reality, the
connection is extremely significant.
Landspace has adopted many design
philosophies and engineering approaches
that SpaceX pioneered. Their rocket uses
stainless steel as a primary structural
material which mirrors Starship. The
fuel combination of liquid oxygen and
liquid methane also parallels Starship.
Meanwhile, the shape, grid fins, and
landing leg configuration resemble
Falcon 9's operational design. Because
so many core elements of 3's
architecture were inspired by SpaceX,
it's only logical that Landspace will
study how SpaceX operates these systems
to make improvements to their own
vehicles. This means analyzing how
SpaceX manages methane flow, engine
chilldown, ignition sequencing, and
thrust vector control on Starship. It
means carefully studying how Falcon 9
adjusts its grid fins, controls its
descent trajectory, initiates entry and
landing burns, and deploys landing legs.
By comparing that knowledge with their
own data, Landspace can refine their
approach to solving the problems seen in
their booster recovery attempt. The
distinction is important because copying
external appearances alone is not
enough. Without understanding the
technologies, behaviors, and failure
modes beneath the surface, a vehicle
cannot achieve reliable, repeatable
performance. Many startups have
attempted to imitate SpaceX without
truly understanding what makes their
systems work. And as a result, they
struggle repeatedly. If Landspace
intends to succeed, they must focus on
learning the underlying engineering, not
merely replicating the outward features.
But beyond direct design inspiration,
Landspace will inevitably learn from
SpaceX's broader operational experience.
SpaceX is the undisputed pioneer and
leader in booster recovery. They have
executed landings on concrete pads,
autonomous drone ships, and now are
moving toward catching vehicles with
Mechazilla arms. Their boosters have
achieved hundreds of reuses. They have
dealt with every failure scenario
imaginable, corrected their mistakes,
and refined their processes. These
accumulated lessons are invaluable to
any company attempting to enter the
field of rocket reusability. Some may
question whether encouraging a Chinese
company to study SpaceX is equivalent to
helping them catch up to SpaceX. But the
truth is that SpaceX encourages this
learning by being the most open
aerospace company in the world. Their
tests, launches, failures, and victories
are publicly shared in real time on
platforms such as X. They do not hide
their technological progress which
suggests that they are not concerned
about competitors imitating them. In
fact, by being so open, SpaceX ensures
that its competitors improve, which
forces SpaceX to keep innovating. This
constant cycle of improvement prevents
stagnation. Catching up would only be
possible if SpaceX stopped developing.
But they do not stop. They continue to
innovate at a pace that is unmatched. As
companies like Landspace attempt to
follow in their footsteps, SpaceX
simultaneously moves on to new frontiers
such as catching Starship and Super
Heavy with mechanical arms, deploying
payloads at a scale that no other
company can match, and pursuing full and
rapid reusability at a level that has
never before been achieved. For this
reason, Landspace's progress should not
be seen as a threat to SpaceX's
leadership. Instead, it is a sign that
SpaceX's influence is reshaping the
global landscape of rocketry. Every
competitor that improves validates
SpaceX's methods and confirms the gap
between them. With that in mind, Zhu 3's
performance still reflects a significant
achievement for China's reusable
methyloxs program. Although the landing
attempt was not fully successful, the
flight data, onboard footage, and
observed precision and guidance provides
strong reasons for optimism. China now
has a platform which it can refine,
improve, and ultimately succeed in
bringing booster reusability into its
space program. At the same time, SpaceX
is accelerating toward its own
milestones. Early next year, Starship
aims to reach orbit reliably, deploy
real payloads, and attempt full stage
recovery using Mechazilla. With these
capabilities, combined with its enormous
scale, Starship will remain far ahead of
all Methalox competitors, including
Zuchi 3. Regardless of how quickly they
improve, we are witnessing the emergence
of a new class of rockets powered by
methane and oxygen. It's an exciting
competitive field. Starship, Zuchi 3,
New Glenn, Neutron, and several other
contenders are stepping into a race that
will define the next era of spaceflight.
So, in this rapidly advancing landscape,
which rocket will you place your
confidence in? Share your answer boldly
in the comment section down below. This
has been Kevin with Great SpaceX. Don't
forget to like the video and subscribe
if you haven't already to stay up to
date with yours truly on the latest
milestones in SpaceX's journey. Thank
you so much for watching and always
remember curiosity, imagination and
inspiration will follow you so long as
you keep looking