Welcome to episode one of Kramer Makes.
I'm Kramer Ammons and I like to restore
things. I like to build things. I like
old things. I like to customize
something perfectly for one specific
need. I picked this up from Amazon
recently. Uh I mean Etsy.
Here's the thing. I wanted a paper
cutter. So, I went and looked for one
and I found some, but they looked new.
And I did not want new. I wanted
character.
I wanted something that would be solid
and make me happy every time I looked at
it.
This is a pretty cool start, but we can
improve on this paper cutter a ton. So,
we're going to refinish it and give it
new life. The company who built this
moved addresses and zip codes were
introduced in 1963. And this address on
the label has a zip code. So it was post
1963. And the grid pattern on this was
really the most common style made for
schools between 1963 and 1970. So this
one was most likely built in those seven
years. The paper cutter I have is a
solid maple base. The arm is completely
metal with a springcast handle. And
lastly, probably the most important and
the best feature is that there is no
safety guardrail. Sometimes in today's
world, things are overregulated, I feel
like, and make tools inconvenient
because of safety reasons, aka they
don't want to get sued. There is no rule
here, but I have a couple decisions I
need to make. I'm not like trying to
follow a specific program of refinishing
things or building things. It's just
whatever I want. And what I like is to
keep the the authentic feel of the old
tool or machine because of the spring.
It keeps it up on the back here. We have
an engraved ruler. And with the grid
pattern, you can line it up exactly on
the engraved grid to get your distance
easy every time. The red spring is
replaceable, but this one's still
strong. We'll take all of this apart and
lubricate it. The metal is rusty. We'll
want to fix that. There's stickers and
gunk on here that just needs cleaned
off. Same thing with the table top. We
can clean this up to make it look brand
new, but keep the nice old maple look.
Looks like there was a repair here
before. I am unsure what this hole is
for. It's a counter sunk hole. Looks
like there should be a screw there, but
it doesn't go into anything. And then I
also am unsure why this extends beyond
the top. Is it balanced? Is is that
extra 1/2 in helping this be more
stable? Maybe. Then we have the logo.
It's like a clear sticker that was put
on. It's not painted on. So, I think I'm
going to photograph that, measure it,
and then hand paint it on with maybe a
stencil or something. Let's keep it
authentic. But there's a couple of
changes here I want to make it look the
way I want it to.
Who knows how many people have used this
paper cutter? Hundreds. thousands. And
because of its solid construction, it's
still here. So, we're going to make this
even better and make it last another 100
years.
I'm way more comfortable with
woodworking than I am working with
metal, but I'm decent at sharpening a
blade, and I'm excited to learn. So, to
remove the rust, I don't have any like
commercial rust remover. I also don't
have an electrolysis setup, but they do
say baking soda and vinegar can get some
surface rust off. So, let's try that.
Let's take this blade off. And it's
actually missing a screw. I realized
just now. I might have one just like
that, though, that I can replace it
with. There we go.
Definitely need some help. Okay, so
apparently I can drop the items in here.
Grab some baking soda.
All right, let's let that chill for a
little bit and we'll see what happens.
Okay. So, the interwebs say that on the
brass this mixture should do the same
thing. So, I've got a Scotchbrite pad
here.
Oh, yeah. Okay. So, I scratched right
there in the middle and it's doing a
good job so far. I know this is really
basic stuff for some people, but if
you've never done something, it's your
first time, you're learning.
And I've generally just uh grinded off
and sanded off rust. I haven't gently
removed it like this. Let's knock this
out.
I think it'll come off easier if I let
it rest. So, I'm going to set this aside
and we'll work on something else. Okay,
let's take a look at this. Okay, that's
a jam nut and it's tightening or
loosening the spring cuz they're
together.
I need to pop that spring out to get the
nut off. There we go. So, now this
should come off. I have something
special for these guys. So, let's go
work on it now. See if you can guess
what I'm doing.
Okay. Our task here with these two
pieces is to leave the ruler on. This
one is actually painted. And so we're
going to leave that there. I'm just
going to sand lightly to clean this up.
And then here I'm going to clean out the
entire grid. Refinish and sand this. And
then I'm going to repaint this on. Then
we'll finish it with a nice soaking in
oil finish.
Oh man.
Well, this is kind of tedious, but I
think it'll make a difference. I'm just
cleaning out all the dust and gunk from
between the grooves.
Makes them look really nice and clean
and pronounced.
Using an X-Acto knife backwards so it
doesn't cut. Getting a bunch of gunk
off.
Whenever you're building something, if
you like to craft things, make things,
you're going to run into this problem of
not having the absolute perfect tool.
And the issue with that is you could
either go buy the tool or you can do the
best you can with what you have. And I'm
a big advocate for doing the best you
can with what you have. But an
invaluable tool is invaluable. So that's
what I'm going to do now. I have a paint
marker here. And as a matter of fact, as
I removed the sticker, I noticed that
the area where the sticker was has not
been damaged by the environment like the
rest of the wood. So, it left an outline
for me. Basically, I have a stencil for
most of this to go in with the red. So,
we're going to try that. Hopefully, this
looks decent. I should have a
calligraphy pen uh that would do better
in this scenario, but we'll just do our
best. So, that's the original.
Got a little bit more work to do on it.
What is this brand name anyways? So
that's an I. I into the N. So let's
finish the N first. Is that bad for
eyeballing it? Okay, now we have a T
that crosses the entire thing. And then
now I need to circle this.
Okay, there's the start. We got to let
that dry. And then we had like that gold
spot. So I'm going to see if I have a
gold pen that I could fill in there. I
used this red marker, but we got pink. I
mean, come on, guys. The best we have is
yellow. So, let's give it a shot. I'm
having second thoughts. I think if it
were me, I would have made a black to
give it contrast. So, that's what we're
going to do.
Okay, that's the original. It's not the
same, but
the issue is that my red came out pink
on the maple. I should have done the
test piece first. I don't like the pink.
Can I paint directly over it with red?
Maybe once it dries. Oh, it's a much
better color. All right, let me see if I
can make this any better. Here's the
updated red logo. It changed the font a
little bit because of the thicker lines,
but not too bad for someone medically
diagnosed with this graphia. I was
hoping to strip that handle paint off,
but the issue is, well, my stripper is
not working good. The paint stripper I
use is for uh like wood and taking
polishes and finishes off. It's not
working good on the metal. So, I'm
probably going to just revert to sanding
and grinding to clean all of that off so
we can have a the natural feel I want on
this piece.
This is still working. Look at this.
Still have this awesome texture. This is
going to be sick. I I got to finish
this. This is going to be awesome.
Heat.
Heat.
Okay, now I'm going to go in our bath.
We're ready for some magic juice.
That smell is so nostalgic.
Let's let that soak in with the rag.
Okay, I'm going to take this outside so
that it can get some air. Time for some
more scrubbing.
When I make videos, I like to use
physical graphics like this. This is a
chart, an elevation chart of uh the
50-mi race I ran recently, talking about
pros and cons, and I paint and color
little letters, and sometimes I'll even
do like uh little stop motions with
little graphics I make or print off
actionable steps by Kramer Ammons. I
like kind of gorilla film making,
tactical, hands-on, rustic. I know how
to edit in digital titles and videos.
Super easy. Oh, how cool. But the
feeling of tangible, going back to
paper, pinning it on a corkboard feels
different. It definitely took a lot of
time to clean up all the rust from these
pieces. Took about an hour, but I got
them all cleaned up really nice. Then I
repainted the handle black. I did this
so that in those deep crevices in the
metal, there would be black dots to add
a little bit more character and cover up
some of that brown that I wasn't too
fond of. I followed the painting with
resanding the handle. And this marked
the point in history that it was time to
reassemble.
All
right, I got to share this cuz it's so
genius. So, I was trying to pull back
the spring because the nut has a hole in
it that holds the spring in place, and I
couldn't get into place until I realized
they were so smart building this that if
you keep the ruler off, what you need to
do to tighten the nut is put a
screwdriver in here, pry that off, and
now I can tighten the nut. And look,
it's going to swing right past. Oh, I
let go too soon. Tighten the nut. It
should swing right past that nub.
And once you're past the knob like that,
look, I can finish tightening the full
circle. And I just completely tightened
it a revolution. You can see right there
is where there's a hole screwed into
this nut. And nearly impossible to
adjust unless you do it that way. But
it's so cool to see something built 60
years ago that's better than how a lot
of things are built today. There are a
lot of good things built today, but the
paper cutters I were looking at were
molded or 3D printed plastic where this
on the other hand, every single part of
this is replaceable. Okay, we got the
tightness pretty good, but we need to
tighten the spring a little bit more so
that the arm stays up independently by
itself. So you can jam nut these. See,
I'll tighten the spring there and then
bring the back one behind it to tighten
it down. Now the arm will stop wherever
I put it. That way it'll never
accidentally fall and get you.
Come on, baby. This stuff makes me so
happy. So happy. Check it out right now.
All right, let's do some good testing
here. Got a normal piece of paper. I did
add another screw that I found
cutting the whole way lengthwise.
Nice. Here.
Now, another test you always want to do
is how thin can you cut it? Cuz then you
know you've got good good connection and
it's sharp.
I mean, that's that was like a eighth of
an inch.
I mean, yeah, super thin pieces. So,
that's a good one. Okay, now let's do
one sheet. Okay, that's two.
No problem with four. Let's try eight
pieces of paper.
Eight was easy.
Okay, 16. And that's probably the
smallest I can go with this one paper.
Cut 16. I'm starting to get thick
though. How about we grab a piece of
card stock?
Oh, that's
I mean, crafting and building things is
going to be
amazing. If you enjoyed the refinishing
of this, let me know because I have many
more videos planned for the series
Kramer makes. With that said, please
subscribe because that would help me get
to 300,000 subscribers and mean a lot to
me and help you see the next video that
I post. With that, I think you're
awesome. Go do something cool today.