In this video, we take a close look at the ANTPO 1.5V AA & AAA Lithium Battery Charger with its integrated storage box design. This compact USB-powered charging station supports both AA and AAA cells, making it a practical accessory for cameras, remotes, game controllers and everyday tech essentials. We explore how the charger works, its build quality, convenience features, and where it fits into a modern desk or travel setup. If you’re considering a reliable lithium charger that also keeps your batteries organized, this breakdown will help you decide.
Note: As an Amazon affiliate I earn from qualifying commissions.
ANTPO battery charger ANTPO lithium AA AAA charger AA AAA lithium battery charging station battery charger with storage box USB powered battery charger 1.5V lithium battery charger compact battery organizer charger tech desk accessories power rechargeable lithium batteries AA AAA digital camera controller battery charger
What's up guys? So, if you are someone
like me who keeps rechargeable
batteries, double A and AAA, then you
need a rechargeable charger as well. And
this is one of those chargers. Uh it
takes type uh type-C input and then you
can at any time you can charge 36
AA batteries and two AAA batteries. They
have LED lights on top of it. It comes
with a type A to type- C cable in a box
like this. And Troopo is the brand name.
And Tupo is its brand name. I will leave
the link in the video description. It
has a magnetic top.
Even if you do it like this, it the top
does not open. It is has strong magnets
right here and then here. So, let's put
in some
batteries inside it and test it out.
one.
So, is it the right orientation? Let me
see which charge comes up and which
charge goes down because that is
something we need to be careful about.
I did see it in a picture.
Not sure
what happens if I put it the wrong side.
Let's try it. I hope nothing bad
happens.
These batteries are already charged. So,
let's see. Most of them should be
charged at least. Double A. Not sure
about the AAA.
All right,
it is closed. Let's
Let's get going.
I hope it does not blow up. Let's turn
off the studio lights. And all of them
are green.
They are blinking green.
And now what?
Nothing.
Does that mean there are four or what?
All right. After going through some
troubles, I have been able to figure it
out. It needs an input of 15 W bars. On
other inputs, it start giving a red
error. But now, as you can see, it is
charging. All the green lights are
blinking, which means that it is
charging. These six lights are for
outers and these two are for inner AAA
batteries.
So, this is very compact solution. You
can put it anywhere and charge eight
batteries simultaneously for your kids
toys, which is my case, or for your
other accessories in case you use AAA or
AA rechargeable batteries.
Just make sure to get the input right.
Otherwise, you will start seeing red
errors. So, read the docs. Uh if I'm I
mean if they had needed it so precise of
an input power they should have sent an
adapter with it. So but yeah try to use
a 15 watt adapter with it or 18 watt it
will work on either one but if it is
less than that then it will not work. So
I have to give it higher input to make
it work. Anyway, let me know about
your thoughts.
Take care of yourself and bye.