How a Single Swedish Submarine Defeated the US Navy

Defense Systems Archive
1 follower
4 Video Views·Dec 3, 2025
How did a small Swedish submarine manage to “sink” one of the most powerful fleets in the world? In this video, we break down the incredible true story of the HMS Gotland, a diesel-electric stealth submarine that shocked the United States Navy during joint exercises in the early 2000s.
This episode of Real Engineering is brought to you by Brilliant,
a problem solving website that teaches you to think like an engineer.
The United States military has the strongest and most diverse navy in the world.
The US military's fleet of aircraft carriers is so large it makes the US Navy the second
largest air force in the world, second only to the actual US Air Force. A single Nimitz class
aircraft carrier like the USS Ronald Reagan, a 6.2 billion dollar nuclear powered ship,
can carry twice the aircraft as any other foreign carrier, which makes it even more shocking that
it was sunk by a single diesel powered Swedish submarine during war games in 2005.
A single submarine that cost the same as a single F-35 at 100 million dollars
managed to sneak by an entire carrier task force with anti-submarine defenses to enter
the red zone and score multiple torpedo hits on the US Ronald Reagan, sinking it virtually,
before shrinking back into the vast ocean undetected. This was just one of many exercises
where the Swedish Gotland class submarine proved too stealthy for the world's strongest navy.
The new submarine proved so threatening that the US military leased the Swedish
sub for an additional year to develop strategies to counter the silent threat.
So what set the Gotland apart from other subs?
Submarines primary instrument to detect enemy subs is sonar. Sonar is essentially a finely
tuned ear that works like a whales or dolphins echolocation to create a 3D map of the ocean
around it. There is active sonar, where the submarine will send out a sound pulse called
a ping and listen for the reflections, but in warfare this isn't a sound strategy,
as the ping is detected by enemies to give your exact location, so passive sonar is used where
no ping is emitted and instead you simply listen. These electronic ears are so accurate that the
nationality of submarines can be determined based on the operating frequency of the alternating
current used in its power systems. The 60 hertz alternating current of a US sub could be
differentiated from the 50 hertz of European subs if the transformers and other electronics were not
adequately insulated from the hull. The Swedes managed to create a submarine so silent that it
was practically undetectable by passive sonar, so how did they do this at such a low cost?
The Gotland was the first submarine in the world to use a Stirling engine as its power generator.
Stirling engines are not a new concept, with the first being created and patented by Robert
Stirling in 1816. Inspired by a series of high pressure steam boiler explosions at the beginning
of the industrial revolution, Stirling wanted to create a safer engine that did not require
such high pressures. I can't be arsed trying to animate this old drawing, so let's go for
something simpler. He did this by creating a closed cylinder containing a fixed mass of gas
permanently sealed within. Here one side of the piston cylinder has a large buffer space,
which allows for a relatively constant pressure on this side of the piston,
while the other side fluctuates in pressure due to alternating heating cycles. When heat is applied
to the outside of the cylinder, the pressure increases, causing the piston to move until
the pressure equalises. Now if we cool the outside of the cylinder with a heat exchanger,
the pressure will drop and once again the piston will move. This is our basic pressure cycle to
create mechanical work, but this is an insanely inefficient system as most of the energy we put
into the system as heat is lost during the cooling cycle. Not to the gas, but the actual
cylinder wall, which provides no mechanical work. Robert Stirling solved this by adding
a displacer piston which can drive the gas from one end of the cylinder to the other,
allowing this end to be permanently hot and the other to be permanently cold.
So the cylinder wall is no longer experiencing a temperature cycle. The pressure cycle here
works slightly differently. First the air on the hot end expands and causes the displacer to move
into contact with the power piston, displacing more air from the cold end to be heated and
expanded, allowing work to be done on the power piston. The air on the hot end now has nowhere
to go and so is driven to the cold end, where it is cooled and contracts causing work to be done
once again on the power piston. This is our new pressure cycle. The efficiency of this system can
be increased further by placing what is essentially a heat battery in the tubes between the hot and
cold cylinders. This conserves a huge amount of heat that would otherwise be wasted during the
cycle and gives the heat back to the air as it travels back through. Robert Stirling dubbed
this the regenerator. Now we have the foundations of a useful engine. By incorporating a coolant
system and a heating chamber we create a larger temperature differential to drive the engine,
and the efficiency can be further increased by increasing the number of tubes connecting the hot
and cold spaces, along with the number of regenerators, and adding fins to increase
the surface area of these tubes to allow for heat transfer. Did I say simplified? Sorry,
I meant easier to read. Maybe I like the misery. Stirling engines ultimately fell into obscurity
as stronger steel became available to make steam engine boilers safer, but I've seen a resurgence
in recent decades with the Gotland being the most famous implementation. The Gotland uses
two Stirling engines that use diesel and liquid oxygen to provide heat, which in turn runs it's
75 kilowatt generators. These generators can run an electric motor directly or charge batteries
that can provide a huge boost in speed when needed. All the while the exhaust is compressed
and stored onboard, allowing the sub to stay submerged for up to two weeks, vastly longer
than any other diesel powered submarine. So why is it so silent compared to other submarines?
It doesn't require much explanation as to why an internal combustion engine using tiny
controlled explosions for power tends to lead to some noise. While the multi-billion dollar
nuclear powered submarines need to pump huge volumes of coolant to their reactors to prevent
a meltdown, causing enough noise to be detectable by passive sonar within a certain range. On top of
this, recently declassified intelligence suggests that Russian submarines are using these instruments
to detect the faint trail of radiation left in the wake of these nuclear powered submarines,
giving the Swedish submarine another way of avoiding detection. This is a fascinating
application of the laws of thermodynamics. Understanding and applying the laws of science
is the closest to a real life superpower in this world, so why not unlock your superpower
of understanding the universe by taking this course on astronomy on Brilliant.
This course will take you from learning about the tools astrophysicists use to observe the universe
through to the calculations that will allow you to peer into the future of the universe.
Brilliant is a problem solving website that teaches you to think like an engineer.
You can dive in and start learning about a huge range of topics, starting from basic physics
and working your way up to more complicated topics. To support Real Engineering and learn
more about Brilliant, go to brilliant.org forward slash real engineering and sign up for free.
The first 73 people to sign up with this link will get 20% off their annual premium subscription.
I get to learn and solve these kinds of problems for a living and I love it.
It gives me that warm glowy feeling inside when I finally conquer a difficult problem.
Actively challenging your brain on a daily basis and getting that endorphin rush of a job well
done is great for your mental health. Brilliant even have an app where you can challenge yourself
on the go. As always, thank you to my patrons and thank you for watching. If you'd like to
join the Real Engineering community, I've recently set up a subreddit where we discuss
everything engineering related and more. The link for that is in the description.
