How NASA Drives the $144 Million Vehicle That Transports Rocket Ships

Defense Systems Archive
1 follower
2 Video Views·Apr 16, 2026
Before a rocket can blast off into space, it must travel 4.2 miles from the Vehicle Assembly Building to the launchpad in Cape Canaveral, Florida. That's where NASA's crawler-transporters come in. They're the largest self-powered vehicles on the planet, and they're designed to transport rockets to the launchpad. We got an inside look at how NASA's preparing and operating the crawler for the 16-million-pound mobile launcher and Space Launch System, NASA's largest and heaviest rocket to date.
This is NASA's largest and heaviest rocket, the 16 million pound Space Launch System and
Mobile Launcher. And while it looks like it's not moving, it's actually being transported to
the launch pad. It's just moving incredibly slow, at just one mile an hour. To get it to the launch
destination, NASA uses this. The 144 million dollar NASA crawler transporter. Large enough
to almost fit a professional baseball infield on top, it's the largest self-powered vehicle
on the planet. And it's a key component to the Artemis program. NASA's most ambitious mission
yet. Every long and complex journey into space starts with this slow four mile journey to the
launch pad. It's the first time that we will be carrying the full Mobile Launcher and the
vehicle stack out to the launch pad. It's an integrated test to check out all the systems,
so it's very important. And we're all working very diligently to make sure that it goes well.
The crawler transporter is so massive, it takes a crew of 25 to 30 trained engineers and technicians
to operate it. You have a driver and a backup driver, engineering responsibilities in the
control room. You've got gel operator, which is our jacking equalizing leveling system that keeps
our load level. Then you've also got technicians in the engine room. You've got technicians in
the pump room. You've got technicians roving around the catwalk, keeping an eye on all the
hydraulic systems. As well as you've got people walking on the ground all around the crawler,
keeping an eye out. They have a better vantage point than the driver, so they're in constant
communication of how things look on the ground, where our trucks are pointed. Drivers operate
the crawler from one of two driver cabs located on opposite corners of the vehicle. Instead of
reversing, the driver walks to the opposite cab to continue to steer the vehicle. This button is what
we use to acknowledge that our cab is in control. The lead engineer in the control room will actually
go assign a cab control, and then the driver, whoever's in the cab, will acknowledge the command
from this button. These three will let you choose your steering modes. Most of the time we're
operating in great circle, which means the front cab is controlling all four trucks, and the crawler
will actually turn in a big circle with the steering mode in the center. It'd be one thing if
the four-mile journey was a straight line, but it's actually curved, and turning the crawler is one of
the biggest challenges. The crawler can only steer up to six degrees, so we divided the steering wheel
into one degree increments, and so we can have a visual representation of how much we're steering.
Driving on curbs involves a lot more anticipation. You have to get your turn in early. You put your
turn in, and then you have to wait a little bit before you actually see the trucks react. The crew
is responsible for transporting billions of dollars worth of research and development,
so every crew member must have a full understanding of the crawler's systems
and its 70,000 individual components. So you see right here, see the wear here? It's the same on
else's. It's not wearing down here, but you can get that wear there. To become certified to drive,
it depends person to person, but usually it's somewhere around a year and a half to two years.
While many different rockets have sat on the crawlers over the years,
the crawlers themselves have remained the same. The two crawler transporters we have in our fleet
have transported every single launch vehicle from this vehicle assembly building out to pad
complex 39A or B since 1965. The Marion Power Shovel Company built the crawlers in the 1960s
by adapting its mining equipment and used two locomotive engines to carry up to 12 million pounds.
And with the extensive maintenance done over all these decades, we've kept this thing running in
some cases as good as it was new. In the past decade, the crew has adapted one crawler transporter
to increase its carrying capacity for the SLS. These are called our traction roller assemblies.
This is what supports the entire weight of the crawler. These trucks will constantly spin
all around this and these will support everything, including we put the rocket on top.
When we started replacing these 88 roller bearings, we did them in one truck at a time. So that would
be 22 at a time. Then we took it out for a test run and that, you know, that would be six months
worth of work there. In total, it took five years just to upgrade and test all 88 bearings.
Before the upgrade, they were originally designed to carry 12 million pounds.
And now with all of our upgrades, we can carry at least 18 million pounds.
Inside the crawler, the vital systems that run the vehicle sit inside the engine room.
So behind me here is our Alco engines. They're 2,750 horsepower. These engines are original to
the crawler. I mean, they've never been replaced. They're one of the few still remaining things from
the original NASA program. This is our Cummins AC generators. These provide AC power for our
onboard systems, including our motors for our pumps, our fans. You're standing directly below
here to actually introduce clean, cool air into the engine room for the techs that are in here.
Today, the crawler is making its way from the crawl yard to the vehicle assembly building,
where it will pick up the SLS and mobile launcher for the first time.
If anything doesn't feel right, if anything doesn't look right, or if something's not right,
stop. Bring the crawler to a stop. After a briefing, the crew inspects every inch of the crawler before
they get the all clear to start the engine. We check all the different pins, counter pins,
quarter socks, that holds the track together. We check every single one of them on every single
belt just to ensure that they are there, because we don't want to break a belt on the way.
With everything in working order, the journey to the VAB is underway. Engineers and technicians
walking alongside the crawler, referred to as walkers, are responsible for flagging any
potential issues to the rest of the crew. I'm checking the gear case pressures. It has to
maintain, you know, a certain pressure in order to function properly, otherwise you'll get an
overheat. You're doing an overall check of the whole crawler just to make sure that everything
is hunky-dory so we can get to where we're going. As the crawler nears the VAB, the driver begins to
bring it to a stop. We are slowing down our speed pot, bringing the crawler to what we call a normal
stop by just dialing back, slowing down gradually, giving all of our systems an opportunity to adjust
and just slowly come down. It takes about 14 crew members to plug its power cable into an outlet for
shore power. We always like to keep our systems running like a computer in your house. You don't
shut it off every time you use it, it just goes to sleep. So all of our electronics are that way,
they go to sleep, and then we have certain types of heaters that keep our engines kind of
lukewarm all the time so they're not starting cold, so that always needs to be powered. These last
steps ensure that the crawler is set up for its ultimate task, receiving the SLS and mobile
launcher. This roll to the launch pad will test all the work the crawler team has put in over the
past decade. The crawler actually crawls or traverses underneath the vehicle in the mobile
launcher. Once we were positioned correctly underneath these gel cylinders, we jack up,
lift up the whole vehicle off the mounts. With the rocket secured on top, the journey to the
launch pad begins. The ground's not always flat, so we have this jacking and equalizing leveling
system that we use to maintain level throughout the transport of the Artemis vehicle. We have an
automated system that actually kind of keeps track of our parameters. When we're going up the slope
itself, we have one end of the vehicle jacked all the way down, the other end is jacked all the way
up, so we've got a range of about five feet. Ahead of the crawler, a truck sprays about 30,000
gallons of water onto the rocky path, which the crawler pulverizes as it inches towards
its destination. The rocks that we roll on, as we crush them, it creates dust. These motors below us
here suck in a lot of air to keep them cool while we're rolling, so that dust will get caught up in
those filters and they'll clog them up. So by wetting all of the rock, that keeps the dust
level down, and then it also changes the friction on the rocks, so it makes them easier for us to
turn. It ultimately takes 10 hours and 28 minutes for the crawler to reach its destination,
where it finally lowers the SLS onto the launch pad. The SLS will remain at the pad for a two-day
wet dress rehearsal, where the team will run through the countdown and other procedures.
No matter the mission, every long and complex journey into space starts with this slow four
mile journey to the launch pad. It's not a piece of flight hardware, it doesn't get all the
fancy press that the launch vehicle does, but in the background we're the most important piece of equipment.
