Making a bow string

Crossbows Legacy
11 followers
5 Video Views·Dec 2, 2025
My name's Colin and I'm here at Archer's Anonymous support group.
Don't tell us your name Colin.
Put your finger there. Thank you very much. You're welcome.
What was that?
Sixty-six and three quarters.
Fourteen you said eh?
Fourteen nine.
How do it? One, two, three, four, five, six, seven.
That's a fourteen strand string right?
Because if your string's made and that's your centre server, that's got to fit right.
I would say that was a little slack. Dad make that fourteen strand string a sixteen.
Because different materials have different thicknesses.
If you've got some of the older style materials, they're thicker.
So your fourteen strand string, the time you put serving on it, is thick enough.
If you use the more modern material.
Going round again then?
What's that fast flight for?
To be honest, I don't know what this is. It's not fast flight.
Oh, I gained your knife back here, shouldn't I?
Go on again, please.
Now, what I'm going to do now, is what a lot of people say.
Oh no, you shouldn't do that.
I'll tell you not.
Turn that, set the knot, and it depends on you, because it's going to be in.
Take that end, tuck it in there, out the rod, just now.
Same with that one, tuck it in there, out the rod, so it doesn't get tangled up with the server.
Your server, split it, because you want this to stick.
Put it through, draw it up, give yourself enough tail.
Wrap round, and give yourself a tail.
And serve over the top of it.
You can start whichever way you want.
But you want to serve over the top, because as you're serving it, you're trapping that end.
Because you go on about string material stretches.
No it doesn't.
Not to the extent that they say it does.
It unwinds, it slides past each other.
Again, going back to the knot in the middle.
That's to slow down its stretching.
And because you do it by hand, you can do it, you get away with it.
If it's made by machine, machine wraps it round, wraps it round, wraps it round, cuts it.
You end up with an end there, and an end there.
And they serve over the top.
And as you shoot, and as the string keeps getting thumped, that slowly starts to split.
And that's how your string stretches.
Now there's several ways of doing this.
You can serve it along to the likes of there.
Now you can sort up and finish it, and you end up with that.
You pull that round and split the middle on that post.
Or you can keep swinging.
So what sort of distance have you done to there, Phil?
If you're just using it to go round the top of the limb?
Depending on the size of the end of your limb, about three inches.
Four inch.
Or you can do that three inch like that.
And you can keep it going.
You swing your jig.
You've still got that.
And you've still got the two tails that you left.
And I can't even remember exactly how Larry Wise did it, or said it.
You guys that have got daughters, and girls tend to have long hair.
And you tend to pleat the hair.
Take the ends, swap them round, and pleat it.
Pleat it up, feed them together, so it all ties together.
Like a ponytail, basically.
You're pleating it for a ponytail, like so.
Because when you continue with the serving,
and I hate to bounce out of the way of the camera.
Now, this one is slightly shorter than that one.
So that when you serve, there's going to be a bump.
Because you're tying the two of them together.
Well, tying as in you're serving round.
Thank you.
You're not physically tying a knot in it.
But it's the way that the serving thread wraps round them all.
One way, is put it in.
Thank you David.
Tie it right underneath, so basically you're trying to strap it on the serving toe.
Which was the wrong way.
Serve over that loop.
That you've made.
Give it about a quarter inch.
So about 12 or 13.
Didn't have Boy Scouts anymore, or Girl Guides, because they used to do this kind of rope work.
Put that tail, that you've cut off, through the loop.
On one end.
Big allen key, multi-tool, whatever.
Grab the other end, pull it in, and pull that loop through.
Alright, snip that off.
Once you've done that, you can, about an eighth of an inch, snip it off.
Which is a bit more than an eighth of an inch.
And this is when, this material is very inflammable.
Be careful.
Singe that end down.
And that's it.
This end's serving.
But to do that, apart from the nerves, you need to know where the middle of it is.
That's what this bit of wax is for.
And it's a matter of putting that, and I dare say you could use felt tip, but I prefer using a waxy chalk.
Mark there.
And when you're looking from this end straight down that end, you want to see that end so it is in line with the peg.
And not pulled off to the side like that, which means that your jig's not squared up.
Now give yourself enough distance off the centre.
There.
There's two fingers off the centre, that's where I want to start with this.
You could mark it, you could mark it, yes.
And then starting it off again, it will tend to twist up until it actually takes enough bite to walk itself.
It's the way I prefer to do it.
Some people, when I'm making strings for particular people, they want it done.
After looking through your jigs.
Again.
Carefully start it off so you make sure you get it caught properly.
Keep the tension on.
I saw the rest of the tail, so I'm going to do the same on the other one.
I'm going to make the bottom serving longer or shorter.
You can make the bottom serving longer or shorter, but you want it long enough so when the bit of string, when the bow, when you let string go, and the bow goes back to the place that it wants to be, it doesn't stop like a brick wall, it bounces.
Not very sharp that knife.
No.
My Swiss Army knife is like a razor blade, you just touch it, bing, it's gone.
That's no good if it's turned with this though.
Shut up!
Again.
Again, you'll note that I've got a big long tail that's going to run the whole length on the centre serving, which tends to assist the centre serving to bite onto the string material so it doesn't have a tendency to walk up or down.
Right, down to one side, serve over the top.
Enough to get caught in the bit.
The string's going to have a tendency to want to untwist, so you have to let it go.
No point fighting against it.
Alright, easily done.
Factor 50, right away.
Yeah, that's right, that's right.
Must be sharp.
So you want to twist the new one up, and me personally, I twist it up about a 16th or an 8th of an inch shorter than the string that you're copying.
Because the first couple of times it goes on the string, it's going to get slapped and it's going to bed and it'll stretch.
New bridge at the junior centre.
There we go, your finger.
No, I'll step through.
Ah, my shoulder, backdraft.
Because I shot it down.
Sorry, I'm taking oxygen out of the room.
Organic.
...
And when you come to the front side, tie a double knot.
Because this is where you're going to finish it.
Sorry, I didn't take sugar either.
It drops.
Take two.
There we are.
Told you.
Get on the rest, it's better.
Look at that.
We're finished.
