Can I Get This 50 Year Old Motocross Bike Running?

Two-Wheeler Technology
5 followers
Nov 30, 2025
Can I Get This 50 Year Old Motocross Bike Running?
A couple weeks ago, Dan and I loaded up in the truck and headed up to State College,
and we picked up a 1972 Yamaha DT250 and this 1973 Yamaha MX250. When it came to motocross
back in 1973, this would have been one of the hottest bikes out there, only to be replaced
by the 1974 YZ. But not every guy got to ride one of those. Those were invitation only. This
right here was the working man's bike, and what a fantastic bike it is. Today, I'm going to work
at getting it started. You see, when I got the pair of these, I got the DT started first because
I said that it was going to be easier. The reason that I thought it was going to be easier is
because that one is points ignition. This one here is like Gen 1 CDI. So if the CDI box is shot,
guess what, fellas? We're not going to have spark. So before I wash it or do anything to this bike
right now, I'm going to check two things. One, I'm going to make sure the engine's free, and two,
I'm going to make sure that we have spark. And I know the engine's free because I think we did that
in the last video, but here we go again. Yep, engine's free and we got some compression. That's
a good sign, but do we have spark? Check this out. Diane, she was amazing. I'm so glad I got to meet
her. She gave us her husband's old racing jersey. Has his name and number on the back. How awesome
is that, Dan? Pretty awesome. And we got his old racing leathers. These are so cool. How much Yama
paint is on them leathers? From the tank? Yeah. You'd think his knees would be silver. I got the
old pads. Got a pocket, put your wallet. I don't know why you'd have your wallet, but knee pads.
It's really neat. And an old helmet, one of his old helmets. Old bell. Look at that. That's about
brand new. Brand newly burnt. If we got spark with the old plug, we'll really get spark with a new
plug. Dan, camera, people in YouTube land, I'm going to go to the other side and kick. Yeah,
comment below if there's spark. Yeah. We're not going to be able to tell. Somebody yell if there's
spark. Celebrate. No way. Yep. Hot darn. That's fantabulous. How about that Gen 1 CDI box, Craig?
I'm loving it. Now the next thing we're going to need to do is, I noticed there's a lot of
air filter hanging out of the bottom of the air filter thing here. So let's see.
Okay. You know what? We got a shop dog now. I got to be a little more responsible.
Oh, there's a lot of mouse turd in there. Lovely. Oh, let's look inside the tank. Did we do that
yet? Dan? We didn't. Somehow over the last few years, the gas cap shrank. Wait, it actually
shrank? Or else the tank got bigger. One of the two. I'm not, I'm not joking. Like the threads
are still there and everything. It's all just smaller. Yeah, it's all just smaller. So get this.
You can still order one of these from Yamaha. No way. Guess what I did today? I ordered one of
these from Yamaha. Oh my. What do you see, Craig? Oh no. Oh my. Did the tank get bigger? Tank
definitely got bigger. Look at that. Oh. Right? That doesn't look bad. Doesn't look bad at all.
Okay. So the engine's free. We have spark. The tank doesn't look bad at all. The grips aren't
good. But other than that, we are off to a fantastic start. Dan, we're going to have a
12-minute video. I'm going to hit it with a little starting fluid. It's going to fire up.
Now what I want to do is kind of hose this off a little and see what this tank looks like clean.
This is exciting. All right, here we go. Here we go. Not bad. Looks cool with that front fender
painted black and the yellow stripe. That cleaned up nice. Now it needs a couple rounds of degreasing.
We'll give it a shot. The Foaming Gunk engine cleaner is like, if you look, best for dust,
dirt, and road grime. The original is better on oil and dirt buildup. The heavy-duty gel is for
baked on grease and cutting through the toughest sludge. The toughest sludge. I kind of always
start light and work my way up. So this will take off what it takes off and then I'll just
work my way up through the degrees of aggressiveness, if you will. The degrees
of aggressiveness, if you will. That's why I keep you around, Dan. And now we wait.
Awesome. Awesome. Bike's nice and clean and sparky and compression-y. Yeah, we got a good
thing going here so far. Yeah. You know, this is just the beginning. It's just got to get
fuel-y now. Choke works. This bike has a carburetor. This was before fuel injection, 1973.
So we got the bike, you know, pretty clean. It's still, it's not great, but it's better. At least
now we can touch it. First things first, I'm going to pull these clamps. We're going to pull the
carburetor out. See what we got inside the carburetor. There it goes. There goes some stuff.
Oh, that fuel smells. Oh my word. That's awful. If YouTube ever incorporates smell-o-vision
as a feature. Our channel is going to blow up. Right. We'll be the first.
We're going to make our lives easier. Going back on.
Pretty sure there was a baby bowl in there. All right, what do we have here? Some electrical tape.
Now we're going to pull our slide out. How are we looking, Greg? Looking good.
Oh, stuff's still coming out of it. Nice. Man, if you guys could smell what we're smelling.
I can't believe these float pole screws are actually loose.
Oh, that's our next. We had a mechanic scented candle. Bad gas. Old carburetor.
Good thing I ordered a new one of those. I got a new needle and seat because
it's always good to replace them. Come here under the light and look at that.
That is awful. Okay, we're going to let that soak for a few months. Okay, this is just standard
disassembly like we have done a million times. That's what the float moves on. Then this is our
needle and seat and that is stuck, of course. Don't want to be too easy for you, Craig.
That's right. There's our main jet. I want to be careful here. I'll show you why. A couple
different ways to take this seat out. One is you can get a wrench. Put a wrench on there and
knock it out. The problem is what I don't want to do is put my wrench here and break it loose this
way because this here can be brittle and if the wrench hits it too hard and you break this,
you just trashed your carburetor. So what I'm going to do, let me just give it a little of
that. I'm actually going to get a socket down on there and my ratchet. I'll pop it off that way.
Still sounded pretty forceful. It did sound pretty forceful. Okay,
and then next I'm going to pull off our choke circuit here.
All right, well I'm going to let that work in there and soak in there a bit. So I'll take out
my air screw. See if I can get this to turn in. We'll count our turns in. Half, one, one and a half,
two. So we were two turns out and then we can have a good idea when we put it back together.
We'll have a good idea of where it was and where we can put it to start. Just like that.
Newer carburetors on this mixture screw, it's going to be spring, a washer and then an o-ring.
You want to make sure you have that washer and that o-ring out of this hole and replace that
o-ring when you do a carburetor because that will goofy up if you don't. We have a lot of crud in
here. This is a pretty gnarly carburetor. We'd like to get that knocked out. So let me try something
here. See a bubble in there a little bit? Trying to get that electrified fuel a little loose.
I want to make sure I don't hit the keyway or my thumb and now we have the pilot jet.
There it is. Crusty, crusty. That was the pilot jet. Now everything is a pretty much out. What
you thinking Dan? Pretty good, eh? Looks like an empty carburetor. Okay, this is going to need to
probably soak for a little bit. Step one is going to be throwing the carb in the ultrasonic.
We're going to get the big chunks out. The floats are stuck. Just going to let that soak.
I guess it won't hurt to throw that in there. Okay, now that soaks. So here's what I want to
do with this bike. Sorry. So this is what I'd like to do with this bike. I want to just get it to fire
up and run. Hear it, smell it, get a little excited about it and then what I'd like to do is kind of
go through this over the next few months. As I have some time we're going to make some videos
and I don't know, maybe it'll be my, I say my race bike for the year. I get to like one,
maybe two a year, but it would be kind of neat. Oh look, this thing here is still
dripping bad stuff, but this is going to be a really good bike to do it with.
We got to let the carburetor soak in the buzz box a little bit and do that. I do have a couple
carburetor pieces that I ordered and they will be here shortly and I'm glad I did that because
that needle and seat is, I don't know if I'll get that one back. So I do have a new needle
and seat coming. Got to get that needle cleaned up a little bit. Air filter. We got to figure out
look at these tires. What tire is that? Look at the bead of that tire and how it sticks out so far
from the rim. Oh, that's not a mistake? No, that was to help protect the rim. Wow. From rocks.
Barham special six days. Wow. That's pretty cool. So six days, if you're not familiar ISDE or
international six day Enduro is when the best of the best get together and they race for six days.
It's a six day Enduro. The U S has been doing pretty good the last number of years. They take
a trophy team, a junior team and a woman's team. And, uh, and then there are some privateers and,
and things. There's actually one local guy to us here that's been racing the ISDE since,
I don't know if it's been, I couldn't have been since the seventies. Could it?
I don't know. He's pretty old, but like when you see KTM has their six day model,
they're like premiums. That's what that is. It's, it's the ISDE. So that's kind of cool.
That's a neat tire. You won't find one like that today. Why not? Just don't make them.
Seems like it works. Kind of like how your eye socket protects your eyeball from rocks.
Yeah. Yeah. Pretty much. Pretty much just like that, Dan. So another thing we're going to have
to do here is air filter. I want to pop this seat off and then that air box lid.
What's in behind there? Do you reckon?
It's just the other side of the air box. If you were curious. Now we know. Now you know.
And you know what GI Joe said, Dan, don't do drugs, kids.
Don't do that either. But he said, knowing which one do I want here? Hold on. That one.
Knowing is half the battle.
Sun Tzu also said something vaguely similar. If you know yourself and your enemy,
you need not fear the result of a thousand battles.
If you should say man who stands on toilet is high on pot.
See what's going on here. One of the things on the MX's that's different than the DT's
is they ran a fiberglass seat pan. So the MX fiberglass DT steel,
this fiberglass is a lot, lot lighter. Now I can take the wing nut off for my air cleaner.
I'm going to take my air cleaner off. That just stops the big pieces, I guess.
Okay. That's that. And then our tank. Let's pop that off quick.
There's that. There it goes.
One of the other cool things with these old bikes is you put a spark plug in here.
And I know that because there's a spark plug in there. And you can also put a spark plug in here.
So what you could do is actually run two spark plugs. And then if you found a plug during the
race, you could pop a cap off, move it over to the other spark plug, put it on there and get
fired up to go again, which is pretty cool. Do you know what would really help clean this up
here? If I gave this another little bit of a bath and then hit it with some WD-40 and wiped it down,
this frame would look a lot better. But we're making progress and this bike is going to run.
Then it's going to be awesome. In that order.
Going to wash dirt bikes with me.
One second for a minute. What's up, pop? What's up?
Now what do we do? We wait. Maybe we need a bearded mechanic puppy's calendar.
We just take funny pictures of our dogs.
Well, you want to dance? I think we need about nine more dogs.
We can have people submit their dog pictures. I'll make you Miss June. Yeah, you can be Miss June.
Well, let's give her a wash.
Is it clean? You tell me. Still looks like a rusty mess, but a sparkling rusty mess. That's right.
All right.
Now, if you're wondering why I spend so much time cleaning this bike,
it's because today's Valentine's Day. And if I'm going to work on this thing all day,
I don't want to be a filthy mess when I get home. All right. Up in the air it goes. Get ready, pups.
Okay, well, that's going to be drip drying. Another reason I wanted to get this pretty
good and clean is just to see what we have. So if I can get the frame good and clean,
that'll determine whether or not it, you know, would need to be pulled off or,
you know, things pulled apart, be repainted. I think this one here is clean enough. It stays
the way it is. Well, let's get the transmission draining. I guess we saw what happened there last
time. Please have oil and not water. Or have nothing. You know what the next step is, Dan,
right? No, I don't. We see if the clutch and everything works. Oh, okay.
Oh, that is such good news. What? We have first gear. Okay, is that second?
Okay, so I'm going to say our clutch is stuck because that is not disengaging. Okay, so our
clutch is stuck, but it seems like we have all the gears. That's good. That means is that side
cover needs to get pulled apart. Or I like this idea better. We're going to get it running and
then like we did with the DT, the DT was stuck. Well, you just get it in gear and you start going
and jabbing on the brakes and a lot of times it'll free it up. It's not the ultimate solution,
but it'll get us to where we need to be for a hot minute. So that being said, let's see if
we can get this bike to run. We're getting there. This carb was super, super dirty, if you remember.
Do you know what's going to stink? Tell me what's going to stink. Well, that stuff stinks, but I'm
going to want to use a blow gun, and it means that little air compressor is going to probably
work overtime here for the next few minutes. Oh, that's good. Stupid little air compressor.
It's a rare sight. Don't normally see you with gloves on. I know, but I better start doing
something. I'm not getting any younger. My skin's not getting any better.
It's like the cool thing now to wear gloves. Protecting your hands is really rad. Stay in
school, kids, and protect your hands. We're going to go to a music montage,
because this little squirrel is going to be chirping for a while.
And we're back. Now we got our bowl clean. Floats are sliding. Dan, you know what time it is?
It's time to put this back together. It's about time to put this back together.
Hallelujah. These are good to use for that, too. Kind of acts as like a little tiny file.
All right, so let's put this carburetor back on. That's what I like to hear and see.
Maybe I need to hit that with a little heat. Tight tolerances here. My word,
not sending this thing to the moon. Maybe you are, because it depends how fast you can ride.
Yeah, we're at the stage of the game where I'm talking to myself.
We're all here for it, Craig. Bear with me here a minute, Dan,
while I get this air boot on. Bearing with you is my modus operandi, Craig. Don't worry.
Why is this thing doing me dirty? I don't get it, carburetor.
Sorry, Dan. Oh, my gosh.
Just going to have to deal. Don't worry, Craig.
When it comes to you blocking my camera, dealing is my modus operandi.
All right, air boot. I'm going to show you who's boss.
My heavens. Okay, well, here's how we're going to fix that.
No air boot? No air boot.
Oh, okay. Put that on for phase
two after this bike runs and everything's ship shape.
So I'm actually doing this is actually a good thing, maybe, because if for some reason this
thing wants to run away from us, I can get my hand over here, over the intake, over the carburetor,
and get it snuffed out. Well, that's how it's supposed to work.
Oh, the new cap.
Look, the old one. Yeah.
It's not doing much. The new one.
Look at that. That's amazing.
I guess we never washed the bottom side of the fuel tank, did we?
Don't you kind of think we need to wash this? I don't want to put all that on my...
I just cleaned that. Just get a wet rag or something. It'll be fine.
Let's wash this. I can't. I can't do it, Dan.
Kind of figured we'd be at this point.
I forgot to shake well. It's never going to work.
See how much better it foams?
How's it cleaning?
Cleaning pretty good. I'm just really hoping there aren't any holes in this tank.
See, if you wear gloves, then you can just use your hands as a sponge.
Starts wearing gloves for one day. Now he's suddenly the biggest advocate.
Wow. You know, I was really skeptical about you cleaning this tank before,
but I think it looks good with less dirt.
Some of that stuff's really on there. Pretty thick.
It's so hard to stop when you're so close to perfection.
All right. Every time we wash it, it gets a little cleaner.
A lot better than when we started, that's for sure.
We need some fuel line and a fuel filler.
We are going to need gas.
Oh my, I cannot wait till we have an air compressor.
Boy, howdy.
Now, Craig, most people have to work off of small air compressors like that.
Heck, for some people, the only air compressor they have is their lungs.
Some people have to blow into their lift tables.
They just have to keep blowing into it.
I think we can make that work.
Okay, look at that. I knew right where our fuel filters were this time, Dan.
It's a blessed thing.
I don't know why I keep standing over here.
There's a big exhaust in the way. I can't see Diddley.
Can you see Jack? Can't see Jack nor Diddley now, can you?
Diddley's a little harder to find.
I can usually see Jack when I can't see Diddley,
but if I can't see Jack, I'm definitely not seeing Diddley.
We need some gas and we're about ready to fire this thing up.
Oh boy.
382 for ethanol free.
Mix it up, mix it up, mix it up.
Okay, we have gas mixed up.
We have fuel filter.
Moose handlers.
Throttle is still working, correct?
And now we got oil.
Oh yeah, I forgot to wash this bottom of the seat.
It'll be fine.
Dan's like, no, we're not washing anything else.
I want to hear this bike run, Craig.
Yeah, me too, man.
Oh man, he's as excited as I am.
I get less excited when I remember we have to use
the old squirrel here.
Oh man.
Oh, it's working.
No whammies, no whammies, no whammies.
See what happens.
I'll turn that on.
We got fuel flow, nothing coming out of the overflow.
So far, so good.
It's all working good.
Nice.
Working where this is headed.
Nice, nice, nice.
Oh, you know what it needs.
Man, no leaks, no drip so far.
I'll be darned.
All right, Craig, what's going to happen?
Dude, how many kicks, Dan?
It's been going too well.
16.
I'm going 14 because his number is 114.
And I'm hoping it takes me a third of that.
Are you hoping it takes you 14 and not 114?
Yes.
Get your kicking leg ready.
All right, bud.
Here we go.
Sorry, sometimes I just like to take it in.
I'm going to turn the choke on, see what happens.
All right, here we go.
Give it a couple of these primers.
Just get things moving around a little bit there.
The kicks.
Damn, seven.
I mean, seven, dude.
That's the first time this thing's breathed life in, what, 20 some years.
It was jumping a lot.
Now it just takes one kick.
See if the kill button works.
Okay, before we get crazy and do something stupid,
I'm going to get something to drink.
That way I don't die thirsty.
Okay, that's working.
Here, actually, let's go outside and pass my truck.
Jumping to life, asking where's the race?
Nice motorcycle.
How many kicks does it take to start it?
One.
Oh, it's working.
It's working.
The clutch works.
No front brake.
Rear brake doesn't work at all.
It's a billy goat.
Absolutely love it.
There are no brakes though.
Dude, this thing is awesome.
I really like it.
Oh, we're totally on the wrong side.
Hold on a second here.
My boots left some skid marks.
Way to go, Brunt.
Now we've got the sun in the thing.
Oh, it's beautiful now.
I know I get excited about a lot of bikes,
and I got a lot of bikes running and different things.
I really like this one.
This is really, really awesome.
I got some big plans for it,
and we're going to have some fun with it,
but that's for another video down the line.
Thanks for watching.
Don't forget to like and subscribe.
Go find yourself an old bike and start wrenching.
Have a great weekend.
See you later.
