How to Make a Super Strong CARDBOARD SHIELD with CLEAR Windows! (Simple Cardboard Hack).

Shielded Dynasty Network
2 followers
3 Video Views·Nov 27, 2025
How can you make a durable cardboard shield
that'll not only stop nerf darts,
but hold up to the brutal beatings of foam swords
and even a mason chain
that can barely even be considered a toy?
Well, in this video,
you're gonna learn the five things that I did
to make a nearly indestructible cardboard shield.
And at the end of the video,
you're gonna get a super sweet bonus tip
that'll help you take a couple of your cardboard projects
really to the next level.
All right, so tip number one is to use strong cardboard.
Now, cardboard comes in a couple different types.
We have, first, the layers of the cardboard.
So here, well, imagine this is a cardboard piece.
I'm drawing with my left hand.
It's kind of rough.
And we got the fluting in the middle.
So here's one kind of cardboard.
Now, they also make a double-layer cardboard.
Usually, the second layer is a bit thinner than the first
so that the fluting is offset.
And this makes the cardboard a lot stronger.
You can find these in some kinds of cardboard boxes
that have to ship heavy stuff
that needs a durable cardboard box.
So if you use this cardboard,
you're really gonna level up your creations.
But sometimes, it can be hard to find that
in mass quantities.
So just watch out for the type of cardboard you're using
because there's also thinner cardboard and thicker cardboard
and they all have different names.
We don't need to get into that.
And so you can have thin versions or the same fluting
where it's just spread out wider for thicker cardboard.
They also make single-layer chipboard,
which you'd find in a cereal box.
And you can use that for decorations
on the outside of your shield.
But obviously, it doesn't have very much structure
because there's no fluting.
If you have a limited supply of thick cardboard,
I recommend using the thickest stuff
for the core of your shield, the main frame.
And then you can use thinner stuff for extra details.
Tip number two goes along with this.
I want you to layer your cardboard
to make a strong cardboard shield.
So you're gonna need to get a couple really big boxes
and then trace out the shape of your shield that you want.
And then you're just gonna cut it again and again
until you have at least three layers of cardboard.
It's gonna be even stronger
if one of those is a double-layer cardboard piece.
You can see on this guy, we have several layers.
They're all kind of mashed now
because it's been through a lot of use,
but it's held up really well.
Something to pay attention to
when you're double-layering it though,
especially if you have a lot of the same kind of box,
is you wanna look at these crease lines
that come in the boxes
and try to avoid lining these up with each other
because that's just gonna create a weak point
in your cardboard shield.
Another thing you might wanna consider
is rotating the grain in your cardboard shield.
So on here, all of the grain is going up
and down in the shield.
But if I took one of the inner layers
and made it so the grain was going side to side,
I get kind of a mesh grain structure overall.
I'm gonna use my whiteboard again here.
So if all of the shield has the grain going up
and we take some of it going side to side,
that's gonna help prevent it
from buckling either sideways or up and down.
And as always, if you want it to look pretty,
you want to make sure the clean side
of your cardboard is facing outwards.
So just pay attention to that
when you're cutting out all the layers.
If you got some really dirty ones
with a bunch of labels on it or weird tape,
I'll put that on the inside
and put the clean ones on the outside
so it's easy to paint or do whatever you want.
Tip number three is to optimize the shape.
So here you can see that I have a whole cardboard shield.
It's cut out so that it protects most of my body
when I'm holding it.
But also, I have these decorative extra layers on the inside
and those are really for reinforcing
right around where my hand goes.
And that just sort of optimizes the shape
because I didn't have a ton of cardboard.
So adding some of the decorations
in a way that's gonna reinforce the shield
is a nice way to sort of like use up
all the cardboard that you have in the best way possible.
Something else to think about though
is the shape of your shield.
You want to try to avoid things that stick out too much
that might get snapped off easily.
Like these protrusions at the top are a little bit fragile
and it probably would have been wise
to sort of have a cleaner straight cut
so it wouldn't break off as easily.
But these were here for a cool reason
that I'll mention later.
Hey, before we move to the next tip
and I reveal the secret sauce
for making an indestructible cardboard shield,
if you're getting value out of this video,
consider smashing the like button
and subscribing to Maker Brain
so that I know you loved it.
And I have a question I want to pass off to you.
Have you ever had a cardboard model
or creation get smashed or destroyed?
If so, drop that in the comments below
maybe with like a little story
and I'll be sure to join in your sorrow
for the loss of a worthy project.
All right, the not-so-secret secret sauce
to making a strong cardboard shield
is to add reinforcements to your cardboard shield.
What reinforcements look like for me
are a bunch of pieces of scrap wood
hot glued and screwed into the shield.
You might've noticed on the front of the shield,
I've got these pieces,
the thicker ones are straight up
just screwed into the cardboard.
Now, they're in strategic locations
to help reinforce the like around the arm area,
but still leave a nice soft place for my arm to go.
These lower ones actually sort of help the shield
hang down low and not swing around too much
because they're so heavy,
but they also reinforce this big open space
and the weak point that was created
by this window right here.
These boards up here are to reinforce the flaps at the top
that I said were kind of weak.
And then these ones on the very top
are to protect from cuts coming straight down
on top of the shield that tend to crumple it.
It is worth mentioning that there are other ways
to make your cardboard stronger.
People use like wood glue and epoxy or Bondo
and they'll spread that or like wipe it
or coat the cardboard in it.
And once that soaks into the cardboard,
it cures and hardens really hard.
And then your cardboard is like hard like a rock.
And that could really strengthen your shield,
but that's a little bit more complicated
and not accessible for everybody.
And I just wanted to show a way
you can make a cardboard shield
without needing any of those fancy techniques.
If you're a cardboard purist
and don't even wanna deal with extra ribs
of like wood on your cardboard,
then I have a suggestion for you as well.
It's kind of impractical to make a super duper thick
cardboard shield with like a million layers of cardboard.
Although I would recommend that
if you're not gonna use wood,
maybe you do like four or five layers of cardboard
with some rotating in the grain.
You can also use ribs on the cardboard.
Right here, I have a book holder and this is all cardboard,
but the front was kind of floppy.
So there's this three piece rib going across the front
and helping add structure there.
It didn't need to be thick the whole way down,
but the rib up here added all the structure I needed.
The same thing can go on your cardboard shield.
You could take, for a shield this big,
I'd probably use like at least four pieces all put together.
And maybe I'd rotate the grain for a couple of those.
So they're facing different directions
and have different levels of strength
in different directions.
Then you're gonna glue all those together
to make like a long thin brace
that you can then glue onto the shield,
just like you saw in the cardboard box.
I wouldn't recommend making it more than like an inch high
off the shield, just cause it gets really awkward,
but kind of the taller it is,
the stronger it'll probably be.
It'll just need to be glued on really well
to avoid it just coming back off or breaking.
We still have that bonus tip coming up,
but tip number five is to put really good straps
on your cardboard shield.
So what I actually did with these anchors
is I put these holes through the cardboard.
They're connected with like a wire that goes around
and then connects to this bent piece of metal
that then loops around my cardboard, my Velcro strap.
That wire goes all the way through the shield
and comes back out the bottom
cause I didn't wanna do just a little loop right here
cause that would pull back
through the cardboard pretty easily.
And that actually goes through
all three layers of my cardboard.
And then these extra pieces on here
actually cover up where it pokes through.
And that gives me some really strong mounting points
that I can pull on
and they're not gonna break my cardboard.
I actually stitched the strap in here
because I knew glue was probably gonna be a little bit weak
for this heavy duty scenario.
Now, when it comes to the straps,
I did something a little bit unique.
These are actually old rollerblading straps
that would be used to fasten rollerblades.
They work really well
cause they got the two parts of Velcro
and Velcro straps are kind of a key
to having a really great cardboard shield
because it's gonna allow you to move around
while you're still holding that shield.
It's not gonna be flopping.
It's gonna be really well secured to your arm.
I have little strap loops on each side.
There's one here behind my elbow as well
so that I can hold it with either hand.
But as you can see,
having those Velcro straps is nice
cause it allows me to hold other things
in that hand at the same time.
All right.
So the bonus tip is to use clear plastic
to level up your cardboard creations.
Now, you might think this isn't super cool
but it really helps in a cardboard shield
because I can still see you
but I'm like completely covered behind the shield.
I used to have an entire sheet of clear plastic
across the top,
but it eventually got smashed
when a Mason King came straight down on top of it.
So I don't recommend putting them right next to the edge
but on this shield,
I have two slits,
one at the bottom,
one at the top.
And if I flip the shield over,
it's more of like a,
like a SWAT shield.
I can go down like close to the ground
and just loop through this one slot
and stay really well covered.
So if you're making your own cardboard shield,
think about how possibly inverting the shield
with the kind of shape that you create
can create a different sort of application for it
with especially if you have windows in it.
I'll note as well,
windows are especially useful
if you're playing with Nerf guns
because they protect your face
and you just don't get shot.
When it comes to getting clear plastic,
there are a lot of ways you can do it.
You could just get clear plastic sheets if you want
but if you're really thrifty,
the best sources I have found
are actually these big mixed lettuce organic containers
because they have a big flat plastic sheet on the top.
The corrugations would work okay.
The side is like all corrugated
because most thin plastic containers that are clear
have some sort of corrugation in them to make them stronger
but that big flat sheet is really useful.
There are actually a ton of different ways
to make your cardboard stronger
that I haven't even shared yet.
So click or tap on the video right here
to discover a bunch of ways
to make your cardboard super strong
or click or tap over here for another video by MakerBrain.
If you're still watching this video,
that's super awesome.
You're more dedicated than like 90% of my viewers
who have left by now.
So you might wanna consider joining the MakerBrain tribe
by clicking subscribe.
I'm Eli Tennant.
This is MakerBrain and have a blessed day.
