In this video watch me sculpt the Guillermo del Toro's iconic Faun from Pan's Labyrinth! In this tutorial I will take you step by step on how I created it. Starting with building the armature, bulking out the body, adding clay and all the fine details; as well as every painting and finishing step to get that super weird translucent skin tone.
Don't forget to like, subscribe, and turn on notifications so you don't miss what's next in my world of creepy clay things.
This video is sponsored by Squarespace. Hey everyone, I'm Ace of Clay, and today I'm
sculpting The Faun from Pan's Labyrinth, the eerie ancient creature who guides Ophelia through a
dark and magical world. With twisted horns, bark-like skin, and an unsettling presence,
he is definitely one of Guillermo del Toro's most iconic designs, and I really hope you enjoy
watching the process of me sculpting him. And look who's back for Christmas in July,
the Holiday Hellions, both the classic version and the fully poseable facehugger variant.
These are available right now through July only, or while supplies last at aceofclay.com,
so if you missed them around the holidays, now's your chance to get one.
Now without further ado, let's make The Faun.
Alright, let's get started. I have one of my wooden bases with the pre-drilled holes and some
10-gauge armature wire. I'm going to start by shaping out one side of The Faun's body.
I'm working my way up the leg, onto the torso, and then I'm going to make a 90-degree angle
to create the shoulder, and then work my way down to the arm. And the wrist. Then we'll trim it,
mirror it to create the other side, and then wrap it together with a piece of 16-gauge wire
along with some 10-gauge for the neck. Now I'm just going to adjust the pose,
and then we can start bulking it out after I apply some bacon bond so my ultralight sticks.
Bulking can also be done with aluminum foil, I just prefer the ultralight because it's way
easier to control. While I'm bulking out the torso, I want to make sure that it's slightly
smaller than the final size I want, because the clay that I'm going to add on top of this is
going to make it bigger. After a little bit of smoothing and some more positioning, our bulking
is done. After it's banked, we're going to apply our final layer of clay, this is Living Doll.
I'm going to add a nice even sheet over my ultralight area, and then we can start working
our way onto the limbs. Before I add the clay, I just want to brush on some bacon bond so the
clay sticks really well to the wire. This is way faster, and I think just as effective as wire
wrapping. And I'm just shaping out the thighs and hip area. Now I'm going to work my way up for a
sec and start detailing the chest. To create the separation from his chest to his stomach area,
I'm using a snake of clay and blending the top edge in with the rest of it. Then we're going to
start adding some pectoral muscles and his neck. Using a small ball stylus, I'm going to start
carving in some of the details on the neck. And using my spoon tool, we're going to blend in those
pectoral muscles. Once I have the chest roughed out, I'm going to use my spoon tool to sort of
map out where all the other details are going to go on his abdomen. And then I can start refining
things with this cone shaper tool. And he's got a little band of fur around this area here, so I'm
carving in that with my explorer tool. Rocking my explorer tool like this allows me to create
this texture without dragging it and getting all those little tiny pieces of clay that get in the
way. Now he's got these two big swirls on each pectoral muscle, so we're going to go ahead and
shape those out now, along with some fun little cracks here and there.
And he's got four nipples, so let's go ahead and add those now.
Once his upper body is looking pretty good, we're going to work our way back down and start
detailing the legs some more. His body is covered in so much great texture. It's like a combination
of skin and bark, and there's just so many little nooks and crannies and details to carve in.
My favorite parts are these little swirls he's got here and there.
Uh-oh, what's that? It's my new spoon tool coming your way at the end of the summer. I took the
trusty spoon tool that I've used since day one, perfected it, and while working on this project,
I realized just how much I needed it. It's got the classic spoon end you know,
and on the other side, what I'm calling the little spoon. The little spoon handles all the spots the
big one can't reach with a super long neck for easy maneuvering and control. I have been working
on this thing for years. I'm not exaggerating. It has been years in the making, and I cannot wait
for you to finally get it in your hands. I really think you're going to love it as much as I do.
And we're just going to work our way down that leg and keep detailing it
just like we were doing with everything else. Man, I am so excited about this spoon tool. You
have no idea. And there are a couple more surprises that are going to come along with
it that I'm not going to show in this video. So not revealing everything just yet, but just
like I said, working on this project, I had to pick it up and use it because it's making my
life so much easier and it's really making this sculpting process more enjoyable. Like look at
that little spoon. Look at how it's just getting in there and it's just smoothing everything out.
And it's just, it's so handy. All right, I'm going to stop talking about this spoon tool.
It speaks for itself. And again, I cannot wait for you to have it in your hands. All right,
now we're just going to keep detailing things and add some little branches sticking out here
and there, blend them in with my little spoon and keep going. And before I start carving in my detail,
I just want a nice surface to start with. Then I'm going to carve out some bark and some
knots with my ribbon tool, smooth everything out and just go crazy.
And I just jumped to the other leg really quick. We're going to detail this the same way
as the first one we did just with some little different nuances here and there. So they're not
identical of course. And then he's got two different looking feet. This one that I'm doing
right now looks like a hoof. And then the other one looks more like a root system. Now this one's
going to have a bunch of little branches coming off of it. So I want to use some flexible clay
so they don't break after it's baked. And of course we can't forget to detail his back. So
we're going to go ahead and slap on some details now. Now it's time for the head. I'm going to ball
up a piece of aluminum foil, cover that in clay, and then we can start pressing out all the details,
starting with the eyes. Now I understand, yes this is a fawn, yes fawns are half goat half human, but
his face is kind of cat-like, especially his eyes. So we're going to go ahead and use our little spoon
to carve those out. I want to get deeper and deeper around them with every pass of my spoon tool.
And I added some clay for the nose and we're going to go ahead and refine everything.
And if you ever find yourself adding too much clay you can always cut it off.
Now let's move down to the mouth area. If you've been watching my channel for a while
you probably know when I sculpt a face I always jump around. I don't fully finish one feature
before moving on to the next. I'll rough out the eyes and then the nose and then the mouth and the
jawline and just loosely block everything out. I do this because I want to see how everything
works together before I spend the time perfecting and detailing each part. It's way easier to adjust
proportions or reposition things early on rather than realizing later that something feels off
after I've already spent hours refining one area. So I'll start with a little bit of everything just
enough to get the whole face mapped out and once I know it all looks balanced or like the character
I'm sculpting then I go back and refine each feature one by one. And he's got these little
subtle nasolabial folds so I'm just using a flattened snake of clay and blending that in
very carefully. All right we're going to take a quick break from our video to talk about our
sponsor Squarespace. I've been using Squarespace for over six years now and it has been a game
changer. It's helped me grow my online presence and streamline my work effortlessly. As a business
owner I need a website that functions seamlessly and looks great and Squarespace delivers. One of
my favorite features is their SEO tools. Squarespace makes it easy to get discovered with built-in meta
descriptions and site maps which helps my site rank higher without any extra effort. I also love
Squarespace payments. I really like it because I can process all of my payments through the same
dashboard that I'm already using. It's super easy to set up and I can accept payments instantly
through multiple methods like Apple Pay and Klarna. No hassle just smooth transactions and if you're
selling products or services like I am their online store tools are top-notch. From inventory
to fulfillment everything is built in for a seamless experience. Ready to build your site?
Go to squarespace.com start a free trial and when you're ready to launch go to squarespace.com
slash ace of clay to save 10% on your first purchase. Now for some cheekbones.
Now his forehead might just look like one big flat surface at first glance but there's a lot
going on up here that you don't notice right away. He's got a pretty prominent brow ridge but it's
so heavy that it hangs over his eyes and if you look closely the whole area is full of subtle
dips and valleys and little contours. And then I'm going to bring out his jaw a little bit more
and make his chin more pronounced. And then really carve out those smile lines.
And once one side looks pretty good we're going to do the same thing on the other.
Now let's poke in those nostrils with our super poker. Knowing when a sculpture or a section
of your sculpture is done is tricky because honestly it never really feels finished.
There's always another tiny detail you could tweak a texture you could refine or a line you
could smooth out some more. But at some point you have to step back and ask yourself does it feel
complete? Does it capture the character the emotion the idea that you set out to create?
If the answer is yes even with a few imperfections that's when it's done. Otherwise
you'll keep chasing perfect forever and perfect doesn't exist in art.
Now we're going to make his horns without smashing his face. I'm going to add some 16 gauge wire
shape out the horn and then add some flexible clay on top of that and start carving them out.
And of course it's much easier to sculpt the horns when they are not attached to the head.
And lucky for me he's got this seam running down the inside of each horn. To make that I'm just
going to leave the wire exposed along the surface. Once it's painted it'll look totally natural and
it saves me a ton of time compared to sculpting that detail from scratch. And here's some blurry
footage showing me attaching the horn and then we are going to add a peak along the back like so
and blend that in with my spoon tool. Now we're going to add a bunch of little ridges
all the way down each horn with my explorer tool.
Now using a snake of clay I'm going to create the area where the horn meets his skull.
And there we go horn number one is complete. Let's make the other one
off camera and then sculpt his ears.
After brushing on some bacon bond I just want to blend the ear clay into the head clay
and add a subtle fur texture.
All right now back to the back we're gonna add a bunch of details without smashing the front
which is going to be relatively easy because the arms are still just wire and I can hold onto those
when I'm sculpting and I don't have to touch his chest. Now I just want to add a few more
details and cracks to the front before I pre-bake him. After filling the hole in his
head with some bacon bond we're going to slide it onto our wire and get this guy in the oven
after a couple more little details here and there.
Once he's pre-baked and cooled down it's time to make the arms. I'm going to start with the
basic arm shape just like we did with his legs and then add a bunch of detail to it.
And of course I'm using flexible clay for any delicate areas like this super cool shoulder.
Creating a convincing bark texture is basically all about layering. You start by mapping out
the bigger shapes with one tool then go back over it with another and another and another
building up the detail little by little. The more lines grooves and little nooks you add
the more natural and realistic it starts to look. It really is just about
taking the time to stack those layers until it feels right.
Now for the hand we're going to start with the base of the hand and then attach each finger
individually. I do have a dedicated hand sculpting tutorial on my channel if you want to check that
out for more detail and in-depth instruction on hand creation. Once all the fingers are on
we need to fidget with them until it looks convincing. Now for a couple more little
branches and tree nubs. Now for his beard before I attach the clay for the beard I'm going to brush
on some bake and bond so that the clay sticks really well to my cured clay. I'm going to start
by the lower beard here and then blend that in with my little spoon and add all of that beardy
texture. For the hair on his head I pre-textured each piece before applying it because it's way
easier to do it that way. You just have to make sure you don't smash out the texture when you're
applying it to the sculpture. And you can always go in of course and refine and nitpick things
after like I'm doing here. I love sculpting hair because it's like the point in the project where
like okay everything else is done now you just got to pop the hair on. There's just something
so satisfying about carving out those flowing strands and building up the layers until until
it feels full and natural. You know hair lets you add movement personality and texture in a way that
can only change the vibe of a piece whether it's wild and messy smooth and elegant or something
in between. It's one of those parts of sculpting that never feels like work
you know because it's just fun to watch it take shape.
When you're blending uncured clay hair into a cured face like this I'm using my explorer tool
and I'm pressing a little firmly so the strands really meld into the surface. The pressure makes
the hair look like it's actually growing out of the skin and once it's baked and painted
like so. I love how this looks it kind of looks like action figure hair.
And let's go ahead and finish up that hairline.
Now we've got one more thing to sculpt and that's his little
knapsack that he's got around his shoulder. So we're going to go ahead and I covered a piece of
foil with my clay and we're just carving out the sack like so adding some seams and then
the flap that goes over top.
Oh and it's sort of held together with a bone so I'm going to create
each side of the bone and stick them on to our bag.
And let's attach the flap make sure the wrinkles are how we want.
And he's got a little bone going across the front here and some little pieces of rope hanging down.
And there we go not too shabby. I'm also going to make the strap out of a flattened snake of clay
texture it with this little brush thing and I'm going to bake it over his shoulder like this and
And there we go he's looking pretty done to me. Let's go ahead and bake him.
And once he's cooled down I'm going to start by priming him with some
matte black Kaleido acrylic primer. This is Gallery's new paint line. I'm using a Gallery
airbrush. This is the Mobius 0.2 millimeter. Absolutely love it and I'm trying their paints
for the first time and unfortunately the only one that I'm using for this project is the black
matte primer just because their color line hasn't been fully released yet. So I do have to use my
regular paints for the browns that I'm adding here but if you want to save 10% at gallery.com
you can use my code aceofclay. Get yourself an airbrush, a compressor, maybe try out some of
their new paints or their paint markers. Everything that they make is amazing and I'm not just saying
that. And I'm just building up my browns. I'm getting lighter and lighter especially on the
face. I want to give myself a nice base before I start going in and painting with a brush. I love
airbrushing. Once you get the hang of it it is so much faster than hand painting with a brush
especially for priming. And you know I can't imagine like I could do it with a brush. I could
paint this thing but it would have taken twice as long and it wouldn't have been nearly as smooth.
Anyway now it's time to hand paint. We're going to start with the hair. This nice red shade.
Once the red is on I'm going to go in with a dark wash and make sure it gets into all of that
nice hair and beard texture. Now for the eyes. We're going to start with the whites of course
and go from there. And using some darker brown we're going to get into those nice swirls on his
forehead. And using another brown wash I'm going to darken the areas around the eyes and just kind
of get into the different shadows on his face. And we're going to add a wash to the horns as well
to get into all those details. All right so far so good. No catastrophic events. Let's go ahead
and paint those goat irises starting with our nice green color. And then the pupils. To further
heighten the detail on the horns I'm going to dry brush on some light brown. And we're going to
things with some more dry brushing all over his body. And he does have some little hints of green
here and there so we're going to dry brush that on too. To bring out some of the lines and contours
on his body I'm going in with a dark brown wash and a fine paintbrush. And we're going to add a
couple highlights to his beard and hair as well. For the back I'm going to start by painting the
bones and washing them to make them look a little dirty. And then we're going to paint up the bag
just layer this light brown color until it looks like this. Then we're going to paint that bone in
the front and get this attached. Gonna look pretty good. Now let's paint up his base and say it with
me. And he is done! My sculpture of the faun from Pan's Labyrinth is complete. Let me know how you
over how much I love this creature. And to think he's in the same movie as the Pale Man just blows
my mind. I think the sculpture turned out really nice. I like all the detail that I was able to
capture. He's got a semi-dynamic pose kind of like looking off to the side. I think that's really
cool. I love how his face turned out and carving out all that bark was a lot of fun. So I really
hope you enjoyed watching the process. Let me know again what you think in the comments. And as
always thank you so much for watching and being here. Be sure to like, comment, and subscribe.
Check me out on Facebook, Instagram, and TikTok at AceofClay and I will see you in the next video.
Thanks for watching!