How to build primitive bamboo and cane arrows

Unraveling the Ancient Longbow
4 followers
1 Video View·Nov 18, 2025
All right guys so on today's field tips we're going to be making some extreme foc arrows
with bamboo shafts so stick with us. All right so like I'd mentioned we're going to be using
bamboo shafts today. Now in a future video I'm going to be making some higher foc arrows with
sika spruce footed with hardwood so if you're not subscribed to the channel and you want to catch
that video go ahead and subscribe so that you don't miss it when I upload that one.
But for this video we're going to be using bamboo. Now there's a couple of key differences between
wood shafts and bamboo shafts. One big difference is that bamboo doesn't have a grain orientation
like wood does and what I mean by grain orientation is in the context of arrows is the growth rings.
Now when you make wood arrows you want to have those growth rings oriented so that when your
arrow is on the bow string that those growth rings are perpendicular to the bow. Now since
bamboo is a natural shoot it doesn't have that growth ring structure and so what that means in
the arrow making process is there's no specific way that this shaft has to be oriented. Now this
can be to our advantage if we want to really make a consistent and tightly matched group of arrows.
Now I'm going to be using a spine tester in this video and I'll just make mention of this real
quick. A spine tester these things are are really kind of expensive for what they are. All they
really do is measure the deflection of the shaft or how stiff the shaft is but if you're going to
be making your own arrows and you're going to be making a lot of arrows and you're concerned with
how well matched they are it they are expensive but it really they really are worth it to have
and to be able to match your shafts so enough about that. So what I'm going to do first thing
I'm going to do is go through and weigh all my shafts and I've got just a little grain scale
here that I got from Three Rivers. I go through there make sure that they're all within a pretty
close range so plus or minus 10 grains or so of grain weight. Now with bamboo you can actually
adjust the weight a little bit because they are hollow that's the other big difference between
bamboo and wood they are hollow and so you can add things inside these shafts. You can take a
drill bit and drill these out and add little number eight shot if you want to you can add
little nails and things like that so you can really adjust the weight on these shafts but
if you order shafts in bulk or if you order them from a supply house that actually will go through
and grain weight match you don't have to worry about all that stuff. So back to matching them
in spine now I'm going to put this thing on my spine tester and I'm going to zero it out then
I'm going to hang my weight on there and just see what this thing spines at. Now this one is 65 pounds
and that's exactly what I want but the good thing about bamboo is you can actually rotate these
things to fine adjust the spine. So let's take all right before I take this off what I'm going to do
is take a sharpie because 65 pounds is exactly what I want for this shaft so I'm going to take
my sharpie and put a dot right on top of that shaft now that's going to come in handy here in
a little bit. I'm going to set that one down and I'm going to put my next shaft up there.
I'm going to re-zero I'm going to hang my weight hot dog that one's 65 as well so I'm going to
again I'm going to make another mark I'm going to put that one down
put my next shaft up there re-zero hang the weight. All right so this one is spining actually
a little above 65 it's more like 67 so this really isn't a huge deal but a few pounds difference
in spine will actually make a difference in where your arrow strikes on the target so long as you
have your back tension in your form and your release and all that dialed in you can actually
see a little bit of difference if you're a fairly good shot you can see the difference in a few
pounds of spine and so what I'm going to do is take my weight off and I'm just going to rotate this
shaft just a little bit re-zero my spine tester and then hang my weight again. All right so that
brought the spine weight down a little bit it's not quite to 65 and so I'm going to rotate a
little bit more re-zero and there it is that is 65 pounds on the nose so now I'm going to put the
put my mark up there so that I know where the spine was measured from.
Now the reason that I'm making these marks on this shaft is because I know now where the spine
was measured and so when I put my knock on here I'm going to have that dot so right now the dot
is on this side of the arrow so I'm going to cut my knock in like this so that way I
measured the spine it's going to be deflecting around the bows riser like this now I'm a right
handed shooter of course if you're left it's going to be opposite but by rotating those shafts you
can really get your spines very very closely matched. All right so I'd mentioned that bamboo
is hollow now for these shafts I'm actually going to cut in self-knocks now I'm not going to go
through the entire process of making self-knocks I've actually got another video that shows you
exactly how to do that but before I cut in my knocks I'm going to go ahead and
plug the ends of these shafts now I've got a drill bit that is just a little bit smaller than
an eighth of an inch it's actually will fit perfectly one of these bamboo shish kebab skewers
and so what I'm going to do is go ahead
drill out the end of this shaft and then I'm just going to glue
one of these shish kebab skewers in there and I'm going to put it in there with super glue
now if you want to put plastic knocks on here you can certainly do it you need to plug this
hole first so that when you taper this out on your taper tool you don't have a hole in the center now
if you try to taper it with without plugging it like this where that where that taper comes down
to that hole it's going to get real fine and feathery and it's actually going to crush a
little bit but if you'll go ahead and plug it with one of these shish kebab skewers you can
taper these things out just like any other wood shaft now I will tell you that if you're using
a taper tool or if you have a taper tool like this that which is a blade cutting taper tool
these don't work very well for bamboo if you're using bamboo shafts you really need a taper tool
that works on a sanding disc and I've got one over here and I've actually got another video
that shows you how to make the taper tool that I use or you can just get one that will attach
to a commercial belt sander you can actually buy a taper tool like that from some of the
archery supply stores but once you've got this once you've got them plugged like I said you can
just treat them like any other shaft now if you are going to use self knocks you do need to wrap
in front of the knock with either thread or a piece of sinew and what I do is just wrap it
with sinew and I put a little dab of tight bond and then take a piece of sinew and a pretty fine
thread of sinew and just wrap right in front of that knock and it doesn't take much you know
quarter inch or so of flat wrapped sinew is plenty that'll keep it from splitting and the I don't
even worry about putting a half hitch in it or anything I just wrap it and then make sure that
there's plenty of glue around it and then set that in the sun and let it dry all right so our sinew
that we wrapped around the knock is dry now I'm going to go ahead and just put this in my
fletching jig now when I put it in the fletching jig the first fletch that I'm going to put on here
is my odd fletch so I'm going to do one natural turkey feather and two commercial feathers now
I want to put this thing in there so that my dot that I marked when it was on my spine tester
is up so that dot is going to correspond with my cock feather or my odd fletch
so go ahead and stick that in there put your fletch in your clamp actually before I do that
I'm going to take and trim the very front of this quill into a point
and now I'll put it into my fletching clamp
and I'm lining it up I like my fletchings to be pretty far back on my arrow so when I have my
string or my fingers on the string the fletching is right in front of my finger I don't like them
I don't like to have them very far up the the shaft the farther back they are the more leverage
they're going to have on the arrow and the more steering capabilities they have but go ahead and
bead a glue on there and this what I'm using here is bonding fletch tight go ahead and this
so that's that needs to stay in the clamp for five minutes before you take that off and then you can
rotate it and put your next clamp on there and then before you actually shoot the arrows you
need to let it sit around for at least a day or so all right so I've got a couple of arrows that
have been sitting around for a day and the the fletching glue is completely cured out now I'm
ready to trim these feathers now I'm going to trim them with a feather burner you don't have to use
a feather burner you can trim them by hand if you want to I like a feather burner just because
you can shape this wire any way that you want to now I've got my feathers or I've got this thing
shaped so that it's pretty much a straight cut from the back to the front and compared to
a lot of smoke compared to a lot of other traditional arrows I shoot pretty small
fletchings now the reason that I can get away with small fletchings like this is because I
spend time tuning my arrows to my bow and I've got a pretty in-depth video going through that
whole process about how I tune these arrows to fly perfectly from my bows and actually the way
that I tune them I could strip the feathers completely off of them and they still will fly
perfectly and so when you have your feathers tuned like that or your arrows tuned like that
you need very little guidance from the fletchings the other reason that I'm able to get away with
small fletchings like this is because I am building high FOC arrows and so the farther
you push up that front of center the farther you push that weight forward the more leverage
your feather end has on the steering capability and so when you shoot a high FOC arrow you can
really get away with running small fletchings like this now in regard to the fletching size
I had a comment on my Patreon site from Steve Lardner and he was asking what do I consider
big fletchings he was saying that his fletchings are five inches long by three quarter inches high
and they're elliptical shape now that's that's pretty standard for a lot of traditional shooters
but with good well-tuned arrows and a higher FOC it's totally overkill these arrows by comparison
are four inches long and they're less at the rear here they're less than a half an inch
and it's pretty much a straight taper and so I'm probably as far as surface area goes
I'm probably half what most traditional shooters are shooting all right so the next thing that I
need to do is just go ahead and trim all of my arrows to length now the length that I cut my
arrows isn't just dependent on my draw length it's actually a length that I've settled on through
tuning and like I said I've got a whole video that covers that but I've got an arrow here a
bear shaft no fletchings that I took through the tuning process and this one is flying absolutely
perfect for my bow it's got 190 grain tip on it and it's cut to the proper length so that it flies
straight when it's when it comes out of my bow now what I'm going to do is just take this bear shaft
that's flying perfectly from my bow and I'm going to take the tip off of it so that I can get an
accurate length on the measurement and then I'll use that length to trim the rest of my arrows
now when you're trimming these bamboo shafts you need to be careful about it because
if you take a big saw or something and try to cut these off you're probably going to make
them splinter because of those little fibers that were running up and down
the way I usually trim them is with a razor blade and I'll just go around the shaft
and score it all the way around and then just keep going around
to kind of cut those fibers and once you score it then you can usually break them off a little
bit of back and forth pressure and pop all right so now that I've got it trimmed what I want to do
is go ahead just like we did on the knock-in and I want to fill that in with a shish kebab skewer
find one that fits right that's pretty good put a little bit of super glue in there so that it
sits in there tight and then we'll let that dry before we taper you can break that off
we'll let that dry before we put our tip taper on there all right so before I put my point taper
on here I'm just going to go ahead and square the end up on this thing and now I've got my
taper tool set to my point taper so I'm just going to go ahead and set it on there
and start tapering so if you're tapering these things for field tips you want to leave a little
over about an eighth of an inch or so you get it to if you taper it too far it's going to hit the
the end of the field tip once you get it up in there and then it's going to rock on the shaft
so leave them a little more blunt for field tips I'm going to put broad heads on these so I'm going
field tips or whatever I like to take a little point brush and just run them run them up in here
and what that does is clean out any kind of oils or anything in the inside of these tips
and it scores the inside of it and it really if you have trouble with your points pulling off
and targets and things like that using that little point brush
makes all the difference in the world you can take one of these points and really after you
score it with that shove that thing on there and it's hard to get off without any glue at all
it's really amazing what those things do so we'll go ahead and put the broadheads on here
just take a little bit of ferrule tight heat it up and smear it on the end of the shaft there
you don't need a lot of glue
now with these cane shafts they're pretty small diameter and most of the broadheads that you're
going to get are going to have bigger ferrules than than the shaft diameter now that's one of
the reasons that I like to take the the taper the point taper down pretty good ways on these
bamboo shafts is because some of these broadheads with the really long ferrules like these these
are from toughhead if you if you make your point taper long it just helps to center those shafts
or center that broadhead onto the shaft and helps them to spin true and when you're when you're
heating your broadheads up like this just be careful not to heat them too much and take the
out of those blades you know especially if you're doing it with a propane torch or something like
that but I personally like to have my broadhead so that when my bow is on the string my broadhead
is laying flat so I'll line this thing up with my odd fletch and just give it a good push on there
and then I've got a little alignment jig here that I made where I can just make sure that
everything is spinning true but that looks that looks really good get all get any excess glue
off of there and then what I do is just dip it in a little thing of water to cool it off so that it
sets the glue there you have it
probably 20 20 percent foc it's a killer so the trick for getting extreme foc in a natural
material arrow is to find lightweight shafts and then put a heavy head on the front
you can get to extreme foc you can get above 18 20 percent foc in any wood shaft if you put
enough weight on the front but the problem is you're going to end up with an arrow that weighs
like seven or eight hundred grains and you know for me that's just too heavy you know for short
shots you know five ten fifteen yards you're probably fine but when you start stretching
that distance out a little bit your trajectory just your arc is way too much and me being a
gap shooter it makes your distance estimation absolutely critical I mean if you're off just
a yard or two you know you could be missing by six or eight inches and so I like to keep my arrows
around 550 to 600 grains and to do that with these arrows and these broadheads these shafts
started off around right at about 400 grains and this is 190 grain head and so through trimming
this shaft back you know adding the flexions adding the head and everything right now this
total arrow weight is about 560 grains which for me is perfect the foc is up probably about
20 or so now one thing I would like to mention about natural shoot shafting like these bamboo
shafts is that someone that's used to shooting carbon or aluminum or even a well-made wood shaft
might look down these things and say man those things look really irregular and they are kind of
there are you know they have nodes there's little bumps there's little undulations but as long as
the arrow is straight from nock to tip those little bumps and little undulations don't matter
one bit I can tune one of these arrows to be just as accurate as the best made carbon arrow out there
and I will challenge anybody to dispute that one of the big reasons that all these little
bumps and things don't matter is that with a well-tuned bow and arrow this arrow should not
come in contact with the riser once it's been once it's being shot or once you drop the string
once you drop the string this thing flexes away from the riser and it doesn't come in contact
with the bow again and so as long as it's straight as long as it spins true natural shoot
shafting can can be very very accurate all right guys so that's going to wrap us up for this week's
video as I've said before if you're not subscribed to the channel go ahead and do it because I'm
uploading a new video every week and then also check out the Patreon site I get a lot of questions
from people who have no idea what Patreon is all it is is a membership site where you can go
doesn't cost very much you can sign up for whatever level you want and you get exclusive
content you get videos on bow building you get little tips that I'm in here when I'm working
on something in the shop that I put up when I have bow building lessons if we run into a particular
problem I'll put up a little video on there and all that stuff is just on Patreon you're not going
to see that on YouTube so if you want access to that extra exclusive content just go over there
and check it out I guarantee if you're into bow building or traditional archery you're probably
going to find something that piques your interest so go over there and check it out but with that
it is if it's not elk season yet it's just about there I'm not sure when this video is going to
come out but I've got things to do so we'll see you next time
