Extreme Gear Labs - Velocity Systems Scarab Placard and Cummerbund Modification

Ballistic Lab
1 follower
Nov 16, 2025
Alright hey guys, so what we're looking at here today is a comparison between a stock
Velocity Systems Scarab and the Xtreme Gear Labs Cumberbund Modification.
So unfortunately I don't have both on hand at the same time. I gotta send this one out
and I haven't gotten the one back from Xtreme Gear Labs. But I'm gonna do my best to guess
what the differences are gonna be or to showcase the way it comes stock so that I can show you
how it compares when I get the modified one in. So Velocity Systems Scarab, if you're not familiar
with it, is an awesome plate carrier. It's easily one of the best ones out there as far as I'm
concerned. But it is lacking a little bit and I'm not sure exactly why. But it is and it's not a
setup so that it can take a placard pretty easily. And it's got a removable cummerbund
flap that sits into a kangaroo pocket. And you can see the kangaroo pocket right there. So
that helps with removing the bulk from the front of the plate carrier so you're not running your
placard over a cummerbund flap as the placard should replace that. But the issue comes in
with the way they've done the velcro on this. So you can see the cummerbund straps there
have this weird cutout in there. Now I don't know if that was done for lightening purposes
or just so you're not pulling as much velcro apart when you try to open this thing. But you lose
some velcro continuity there, especially when you put on a placard. And then to kind of add
insult to injury, when you open that up, the front of the vest also doesn't have a full
velcro field. So they just have the velcro covered molly here. So when you kind of combine those
together, you end up with a less than ideal velcro mounting surface for your placard. Now
in all honesty it's not that bad. If that was all that the modification fixed,
it may or may not be worth it. But one other thing that Extreme Gear Labs does when you send
away your cummerbund to be modded is he puts first sphere tubes onto your cummerbund. So
this, if I'm imagining right, will all be a velcro field with tubes hanging off of the end.
And then your cummerbund hooks up to that and your placard sits down unobstructed by anything
else. So not only are you getting more velcro surface area there to hold your placard in place,
but you also need to manipulate the velcro less, which will cut down on wear and tear. So
if I'm right, and you guys will be able to see this in about 30 seconds versus me waiting
however long, once you close your placard it'll just sit there until you need to change it out
for something else. And you'll never have to open it because the cummerbund will plug
right into the side. All right, so not a overview on the the Scarab as a whole,
but hopefully that breaks down the front good enough that you can see why this modification
exists. And hopefully in reality it turns out being worthwhile, but we'll find out together.
Thanks. All right guys, so here's the Extreme Gear Labs Scarab modification.
So it consists of two parts, if you will. So you have this front velcro portion with the
male tubes, and then the original cummerbund has had the velcro flap or the velcro end cut off
and the female portion of the tube sewn on. The way this attaches is
this flap, and perhaps I did this upside down, this flap tucks into the kangaroo pocket,
and then this velcro mates up with the front of the vest, and then this portion here ends up going
into your plate pocket on the bottom. So that thing is rock solid once it's in there.
I'll install it in here in just a minute and show it to you. It won't go anywhere,
and then you've obviously got your tubes hanging off on the end that your cummerbund can mate up
with. You know, typical Extreme Gear Labs stuff, it's all very well made. I don't think anybody's
ever challenged the quality of Darren's work. I have no complaints at all on that, so I'm sure
it will last. Let me go ahead and install this thing and show you how it works, and then a
couple of my thoughts on it. All right, so I wanted to capture this before I move too far into
the installation of this thing. So once you get that top portion tucked into the cummerbund pocket
or the kangaroo pocket there, this bottom edge you'll see mates up with the bottom flap on the
plate pocket, and they basically become one thing there. So it's at that point just mimicking what
the plate pocket flap would be doing anyways. Okay, so there it is. I finished installing this
thing. You can see the tubes mated up there, closing the cummerbund, or closing the plate
carrier, and you can see now it has a solid Velcro field on the front of this thing. I had it set up
to use the Spiritus System micro chest rig thing there, and you can see there's still
plenty of Velcro off on the sides of this thing, and it even lengthens the field a little bit.
Obviously I don't have it clipped in, but once that's clipped in it is solid and not going
anywhere. Now I will say the front of this thing, the Velcro field, is a little big. It hangs off
the sides here a little bit, but there's a there's a reason for that. If you move up to a
custom placard or a four wide on your magazines like this Haley thing here, you'll see that
footprint matches perfectly. Now the Haley rig itself, that's not really a benefit because
the Velcro on the back portion does not run the full width, so you would definitely want to use
those side release buckles to keep that thing from going anywhere, but if you get the Extreme
Gear Labs version of that, one of their custom one-off versions, and you get a full Velcro
backer on that, it will match up and there will be no play in that at all, which is awesome. You
can go four wide on the magazines. You definitely have the room on the vest for it, so why not use
it, and then you don't have to worry about the the tail ends of that thing being loose and catching
on anything else. All right, so here are just a couple of my thoughts on this thing, and one
concern that I noticed, and none of this is a slight against Extreme Gear Labs at all.
It's a one-man shop, and some of the current manufacturing capabilities probably
aren't necessarily at his disposal, so this is super low threat, but there is a little bit of
bulk here. Some of the sizing on this might be a little bit of variation between
velocity base rigs, I'm not sure, but you can see down here a little bit, there's just,
when you start overlaying, you know, this Velcro on top of the flap that's already there, on top
of the plate pocket flap, you get a little bit of bubbling here and there. Is it going to affect
the usability and the durability? No, but you do get a little bit of play there.
Not a big issue at all, and it is a little bit wider than what the front was, but I already
showed you that can be a pro as well. You're definitely going to want some sort of material
to keep the Velcro from attaching while you're trying to finagle that in there. I used a plastic
shopping bag and that worked out fine, but unless you love your hands getting torn up by hook Velcro,
you're definitely going to want to do that. The only other thing here, and I think this is just
an issue that I'm going to run into, not necessarily everybody, this is going to be
luck of the draw here, but the way this is set up, so with the tubes basically being fixed,
there's no adjustment there, a little bit wider of a platform here, so you've got the width of
the tube plus a little bit wider on the field and the inability to tuck that Velcro further in or
out, you wind up with your cummerbund basically going up a size. That multicam one that I had
shown you, that was a medium and it fit me fine. This one was also a medium, but what happens once
I have this thing installed is I have too much cummerbund, so what I did is I had to take some
shotcord and I basically tied off, I cut out two columns with shotcord. Now I have some flexibility
there now because if I'm wearing heavy layers this will stretch out or I can use the internal
adjustments, but you can see I've got this thing tightened down all the way and where it was a snug
fit before, with this thing installed it was loose, so you know, 50 cents for the shotcord,
I lose two columns on my cummerbund, but I don't really load up my cummerbund anyways,
so it feels fine, it doesn't feel like it's bunching back there at all, there's no comfort
issues, it was just something that was foreseeable that I didn't catch. Your cummerbund gets bigger
when you have this thing installed, and then really the only reason why that's an issue at all
is the way Velocity did these cummerbunds is probably my least favorite method out there.
If you haven't seen it, there's velcro running in line with your molly rows there and it's just like
one wrap, like it's hook on one side and loop on the other, and it's as long as the plate,
so there's plenty of room to pay this thing out, but you really can't, you can't take it up
any more than that, and I'm confused on that because if you let some of that out then you've
got hook right up against your body, and it doesn't seem as durable, I don't really know
what the idea there was on the Velocity Systems side, that is my only complaint on this vest at
all, so definitely something to look for, look at, I think it's a well-designed product for sure,
the benefits are exactly as advertised, you get a better velcro field, you get the tubes
capability, so it's quick donning, quick doffing, nothing ever moves, it's always in the same spot
every time you tie that thing on, and then you know your placards, you can go an extra magazine
wide, you're no longer limited to three up front, you can go four wide and have that solid platform
there, hopefully you guys got something out of this, I know it's kind of a niche deal,
if you're interested in it, definitely hit up Extreme Gear Labs, and I'm sure he'll work it
out with you, you're going to get color matched, he just doesn't do wolf in stock, so I told him
black would be fine, he's limited on the tubes colors obviously, but the velcro portion, anything
else should be color matched, so definitely hit him up and feel it out with him, see if it'll work for you.
