BARE BOW to HUNT READY! 2022 Compound Build, Set Up & Tune

The Ancient Longbow Legacy
8 followers
4 Video Views·Nov 10, 2025
Welcome back to the channel y'all we've got a full build video for you here today and we're
going to be going from a bare naked factory bow like this to a fully rigged ready to hunt
compound deer slayer. Let's make it happen.
So this is where it all starts right here in the cave and we're going to take our bare bow
and turn it into the one you saw over here. So I've got two new bows this year.
Bowtech hooked me up with two bows which is really neat because I have the opportunity to set up two
different styles of bows. You know I've gone down an archery rabbit hole this year. My number one
goal is to get a deer with my trad bow. This guy right here. Okay just get a deer I don't care if
it's Bambi. I'm gonna be crying if I actually get a deer with that. Obviously compound bows give you
a much bigger range they give you many more opportunities. Two different setups this year
I've got my blind bow my blind and basically if I want to get in a real tight little tree stand
situation this is the bow I'm going to go with. This is my CP 28 so that's a 28 inch axle to axle.
I've got no peep on here so this is I've made this to shoot low light inside of a dark blind.
Basically it's got a shorter frame to it so it's easier to draw back in a blind. This is a really
cool bow. This bow is a little bit longer and it's going to be a smoother draw which I really like.
The shorter axle to axle the heavier it's going to be right out of the gate. So if you're in a
blind and you don't have to worry about a lot of movement you're not sitting up in a tree or
stalking situation where you're around a lot of cover I can just go ahead put a lot of muscle
into that bow kind of change my draw to get some leverage on it. This is going to be a much
smoother draw and that's what I really like. I'd rather have a lower poundage smoother draw
for making longer shots for being really sneaky and having to just draw straight back real slow.
It's the Solution SS it's one of Bowtech's new bows. Let's get this thing shooting some arrows
First thing I'm going to do is take this this little brass speed knockoff. I actually thought
that was like a center shot marker you know this is my this is part of the journey learning all
this stuff. I called Bowtech I was like hey what is this for is this is this marking a center shot
should I be putting my arrow and they're like no that's literally just from the factory test.
Next step is adding our rest we're actually going to be flinging arrows out of this thing
pretty soon. I like to go ahead and get the string stretched out start seeing how the arrows are
flying. For our rest we're going to be putting on a ripcord drive cage and this is going to be
limb driven.
All right we got something to put our arrow on now I'm not going to tie this down just yet
because we need to measure how our arrow is sitting on the rest to get it level. So the big
thing that I'm looking at is these two holes that are in the riser right here right in the middle
and I basically want that arrow to intersect those holes evenly. I want it to go straight
across those holes when I'm looking at everything dead level which I got to get this bow level
while it's sitting in my little vise here. This isn't a bow vise either this is literally just a
bench vise that I put some leather straps on. Literally after we get that arrow sitting where
it needs to be and get our knock on there and get a d-loop we can go shoot this bow.
It's that it's that that easy that's that's a bare bow ready to shoot and I like to shoot them
bare before I start adding everything else on. All right bow looks square I got a cheap little
level I don't know if I fully trust this thing I really trust the arrows like how the arrows are
flying and then I'm going to get some serving material and just put a little loop where it
looks level to me. Tighten that up a little bit and then we'll put a little level on the arrow
until that looks level that's pretty close. Okay everything's looking really good going
straight through the two holes in the center of the riser we've got our bubble level right there
and I think we're ready to tie on a d-loop now so we'll leave that little knot in there.
So if you do decide to make the leap and get a bow press do me a favor and be very careful
because the first time I put a bow in the bow press didn't know what I was doing got one for
first time this year I derailed the bow after messing around with the string I was trying to
do some string tuning with the peep and I didn't put enough pressure when I put it back into the
press and string came off the the cams derailed the bow that bow is currently at a bow shop so
make extra sure when you're putting everything back in its place keep pressure on the string
as you're putting it down don't want anybody to get their bow screwed up or their face screwed up
the main thing with a d-loop is you definitely don't want it to come off that's for sure you
want to make sure you're doing a proper knot on there I would say this is probably the most
important thing you could learn if you're not even setting up your your bows by yourself at home
this is just know this because these things get messed up you know you get twists in them this
is something you definitely want to be able to do at home so I'm not going to spend a lot of detail
on it because there's a thousand videos on the internet but the main thing you want is to start
with your your main line on this side of the string towards you and then you're going to put
it on the opposite side as you make your other knot you've got this little twist in here and
that's going to compensate when you turn your wrist especially if you're using a hinge release
or a thumb release opposed to an index I've also just tied these little stop knots in here so it's
the measurement of the knock basically is uh is the distance between those two that's just going
to help sit that arrow in place this tag end right here is going to be on the outside so that loop is
towards me on this side and it's away from me on this other side the tag ends are facing the outer
cams of the bow the ends of the bow as far as size goes on my d loops I like mine
just a little bit longer than probably the average person but
that could be completely up to you now we'll go ahead and just really wrench on that thing
like three quarters of an inch so to tie on our cord here to our arrow rest there's a little
rubber sticker that comes with it I've got that on the bottom of the limb and we're going to feed
the string through here through that little rubber deal and that'll prevent the knot from
moving around and then I'm just going to tie a fishing knot just a small uni knot and we're
going to slide that down kind of center it up slide it down and really tighten it
or it's not going to slip anymore all right I think that'll work so at this point it is time
to draw back this bow for the first time and then fling about 50 arrows I'm just trying to stretch
the string out so when I put the peep in it's not going to move anymore and I'm loving the draw cycle
on the Solution SS it's smoother it's more what I'm used to and the bow is firing really nice
another thing I'm checking out as I'm stretching the string I switch from a fletched arrow to a
bear shaft and I'm seeing how this arrow is flying in the air flying right is it flying left
is it up or down up and down looks awesome but it is kicking hard right so I'm making adjustments
to that rest until that arrow is flying like a daggum arrow should just straight at the target
got a little confident step back to 20 yards just to see if that bear shaft was gonna fly
straight all the way through ended up misjudging the distance lost an arrow but that arrow was
flying straight and that's what we want going back in the shop I'm just confirming the center
shot of the bow with a bow square and the knock is lined up perfectly just putting that level on
the arrow seems to really line things up nice the next move for me is I like to add a second indicator
on my string and that is for my nose I like to sit at the tip of my nose either on the string
or recently I've started using a booger button or a nose button right there it's just a second
confirmation and I really like using that with no peep but I'm honestly just going to add that
second one on this peeped bow just to have that extra security extra anchor point and to get that
just right I'm going to put an arrow in the bow I'm going to draw back I'm going to close my eyes
and I'm going to use my muscle memory to put my tip of my nose right on the bow string and remember
that spot I'll look at it I'll mark it down I'll tie a little string indicator on it and I'll move
that until it is exactly right and I'll do the same thing for the peep using the bow press I'll
split the string equally it's really easy to see here because I've got gray and black string
split that right down the middle and insert the peep draw back until when you open your eyes
you're seeing a good clear straight peep once I do that I'm going to temporarily tighten the peep
so we can go shoot this bow some more after we get the sight on this year I decided to totally
switch it up and go with a single pin on both of my bows so I'm using this black gold single pin
sight it is awesome I love the clear picture and it is easier for my eyes as I'm getting a little
bit older so I got the bow and the bench vice as level as I can and then I'm just making adjustments
to the sight itself on the first second and third axis to get everything at a matching level this is
where it really starts to get fun y'all is when you got the sight on the bow and you're flinging
arrows and you start getting groups and I'm just making little adjustments to my black gold sight
little clicks at a time until I'm getting those groups consistently in the center of the target
so when I get my consistent groups at 20 I'm just going to go ahead and take a pencil
and I'm going to mark exactly where my red arrow is on that sight then I'm going to slowly dial
this bow out at 30 40 and then 50 yards until my elevation is looking consistent at that 50
then I'll make my second mark that's going to help me determine how much the arrow is dropping
and what tape I need to pick out to put on my site so comparing my pencil marks to the
sight tape booklet that came with the sight it's looking like we're at 277 and I'm placing the 50
exactly where that red marker is where my dial was where I last shot and then I can dial back to 20
and now we are good to go so even though I shot like 80 arrows through this bow after it was all
said done I still ended up getting some peep twists there at the end so one thing I decided
to add as I went back and added a peep tuner inside of there so I don't have to do anything
with the twisting of the strings one thing I really like about the Bowtech bows is I can check
the timing on the cans with little indicators they have I don't like messing with all of that
you know I've I've already derailed a bow trying to mess with peeps I just hate peeps really but
they are just they help you be so much more accurate at long distance and then once I got it
exactly right and I made little micro adjustments moving up and down pulling back a bunch of times
and getting used to it I went ahead and I did my final tie-in of the peep and I did that real
popular I guess Levi Morgan came up with this this method works awesome though it really locks
that peep in there so that thing is set it's not moving now I still have just a few micro adjustments
to make with my little knock tie-ins right here I think the knock is it's a little tight right
now it's being squeezed when I pull back so I'm going to adjust that just a hair but as of right
now that peep is straight on and when I pull back it's straight on so it's time to add the final
touches one being a grip tape when I say we're fully rigging this bow we're fully rigging this
bow here one final step with the sight I'm going to do I'm going to take this off and I'm putting
Loctite on there because I don't need to make any more changes we're shooting good we don't
want this thing to move just squeeze that all over my finger and gun it but this will get us
through the season without having any back outs so I'm not actually taking the sight off to do this
I'm leaving it on just doing one screw at a time and don't think we're going to have any movement
but we're definitely going to go we're definitely going to go shoot this bow again
now that we got the peep locked in sight is locked in for good for the season
JB Weld Permalock blue I use that on my scopes and stuff too. Warning! Cancer! Avoid contact with skin
good to know I'm already one leg in with a brain tumor don't think a little
finger cancer is going to kill me. Stabilizer install probably the easiest thing that we're
going to do with this entire bow this is the QDS 6 inch carbon stabilizer I also don't normally
hunt with a quiver I don't like the extra weight that unbalances the bow so I usually stick it on
my pack my backpack hunting or even my small pack when I'm whitetail hunting or hanging up in the
tree or whatever but I am going to add the the mount and everything on this this one is the
tight spot shift lock so it allows you to adjust this however you want I like to have it so my
uh my nocks are not digging into the ground if if my bow is sitting or something so we're gonna
put this on here and adjust it tight spot on now I'm just going to put an arrow in here and adjust
it exactly where it needs to be I think that is it y'all I think that is our mighty Bowtech Solution
SS completely done and ready for its final shots at a deer target what are we sitting at right here
I'm gonna guess 36 or 37 because I shoot here a lot 39 just to touch over so
why don't we load an arrow and see how this thing is shooting dialing to 39 I actually like to shoot
a sight tape that actually puts me a hair under at those uh longer distances just because animals
like to duck and if I miss that lung shot I'm hitting them in the heart
beautiful bow is feeling smooth there's only one more test that we have to do before we can take
this bow to the woods and it be just as ready as that cp-28 that is we're gonna take a 30 yard
three shot group with field points and then we're gonna put a broadhead on we want to make sure that
the broadhead is flying just as good as the field tips so I got 125 grain field tips and broadheads
now I really don't think we're gonna have to do anything because when we were stretching the
string out we shot those bear shafts until we were lining them up straight but if we do have
to make adjustments one of the great things about the newer Bowtechs is they have that deadlock
system so you can just move your cams left or right until those those arrows are flying straight
and you can get your field tips and your broadheads lined up all right moving you guys right here
because 30 yards is should be right here 29 that'll do okay field tips first wow that was just
dead dead nuts pulled just a hair so it feels a tad loose but we're right there in that zone
dead nuts absolute dead nuts all right let's go take a look at it and then we'll put a broadhead
on see how that aims our windage is just right so something that could happen with broadheads
it could shoot low could have more drag and shoot low you know or what we really don't want is if
it's going low and right or right or left or whatever so that's the main thing we want to
check for i'm gonna aim right at that center dot again see where we go with the broadhead there may
not be that much of a difference at 20 30 yards i'll really be able to tell like i said i don't
think it's going to be that bad but at 30 yards i'll be able to tell a smidge high i'm using these
aae max vanes they're a little big but i wanted a lot of control on the arrow for for broadheads
but you don't even realize how much correction those fletchings will do or those vanes will do
until you shoot with a bare shaft i mean it'll come out completely sideways and correct with vanes
yeah i don't need to shoot it anymore we're done all right now for fun we're grabbing both bows
and we're going to see which one i shoot better with solution ss with the peep sight and index
release or the cp28 no peep thumb release 30 yards let's see which one wins we're going to do
the ss first because i've got my index release on so i'm going to shoot at the left square for this
one you're definitely in the square right there sort of pulled it but we're still in the square
that could be my release that thumb release is a little smoother
not gonna lie it's a pretty good group okay i feel like this bow is a little bit louder
and this bow is harder to pull back at the start because of that 28 inch axle to axle but
the let off is insane i'm gonna go center target here oh my god i feel like it just completely
goes away just a hair high this bow is just a little bit heavier as well
god dog it i pulled it solution's gonna gonna win here god dog i got two arrows like
real close to each other just a tad low and i got one high peep versus no peep we're definitely
tighter here uh normally i shoot a little bit better it could have been i just was a little
tired on those shots but i still love not looking through a peep and having that wide open picture
at close distances and now we have two bows that are ready to take to the woods and hunt
and you guys got to see me go from literally a bare bow from the factory to a bow that is
bear shaft tuned broadhead tuned ready to go hunting in the woods let me know in the comments
which one you would rather take man for me it's uh it is a toss-up right now really just depends
on the situation uh if i'm you know short distances white tail hunting especially low light
this is the one i've really fallen in love with uh it is just a little tough on that the beginning
of that draw but love the let off on that cp28 this bow is just smooth it's just smooth all around
i feel like it's it's quieter it shoots smoother smooth draw cycle it's and it's dialed it's it's
good for long distances so if i've got a situation where i'm stalking and i'm gonna have a long shot
maybe elk hunting something of that nature i just know i need to make longer shots i'm definitely
taking the bow with the peep i'm shooting both eyes open on both of these but there's something
about just not having that peep in the way and watching that arrow all the way through with both
your eyes i can't wait to watch this thing hit an animal this season you better be out there setting
up your bow and practice it right now because the season is just around the corner y'all i can't wait
to take y'all to the woods with me so subscribe to the channel and hit the like button maybe you
learned something today maybe you just enjoyed me fiddling around with bows but i will see you guys
on the next adventure in the great outdoors
