BMW X5 M50D . Engine F15 N57X .(Part 1) Installing the crankshaft #KasemAutoservice #bmw #cranksheft
BMW X5 M50D . Engine F15 N57X . (Part 1) Installing the crankshaft #KasemAutoservice #bmw #crankshaft #n57x #f15 #m50d #x5
BMW Deutschland
#kasemautoservice #chain #engine #timing #vw #bmw #automobile #new #carenginerepair #n57
Peace be upon you, we are back after a long absence.
New engine, new slender.
Of course, this car is BMW X5.
This engine comes in N57, but N57 is the X.
Also, this is the 2017 model.
This engine comes with 280 kV, that is, 380 PS.
This engine or car is known as BMW X5 M50D.
In short, it is the BMW F15 engine.
This engine comes in N57, X, and F15.
Of course, this car comes with 3 turbochargers, 6-cylinder diesel engine,
new slender, new crank, new suspension, new brakes, new oil pump,
new rear suspension, new shock absorbers, new clutch.
We will assemble this engine step by step,
and I will upload the video, each part in its own part.
Of course, now to install the suspension.
The suspension comes numbered.
This has a number 3.
It is installed in this direction.
As you can see, this is number 2.
This is number 3.
This is number 4.
Of course, even the new parts are numbered.
This is number 5.
This is number 6.
This is number 7.
This is the last one.
Now, the brakes are installed.
Of course, the brakes have an oil drop.
It is a very simple thing.
Of course, now you tighten them by hand.
All of them must be tightened by hand.
You are not allowed to use anything by hand.
Then tighten by Newton, then by degree.
After installing the crankshaft and the suspension,
we tighten it by 40 Newton.
This is the first tightening.
After we tighten it by 40,
we tighten it again by 40.
After we tighten it by 40,
we tighten it by 60 degrees.
After we tighten it by 60,
After we tighten it by 60 degrees, we loosen the screws and tighten them again by 60 degrees.
We'll be back in 10 minutes.
We'll be back in 10 minutes.