Dollar Tree DIY Thanksgiving Decor And Craft Ideas | Fall DIYs | Dollar Tree Thanksgiving Tablescape

Holiday Decorations
97 followers
#Dollartree #Highend #Dollartreecrafts
Hey guys! I am so excited to share today’s video, it is packed with all new Dollar Tree Thanksgiving DIY’s, tips and tricks for throwing a beautiful inexpensive Thanksgiving dinner. All of these DIYs can be put together very quickly, and best of all they are all super easy to re-create. The corn covered vase candleholder is my personal favorite, but I would love to know what your favorite is in the comments. I hope everyone has a Happy Thanksgiving! 🦃
Dollar Tree Diy Thanksgiving Decor And Craft Ideas | Fall Diys | Dollar Tree Must Haves!!
Hey friends, welcome back to my channel.
In today's video, I'm going to be sharing
all new Dollar Tree Thanksgiving DIYs.
This video is going to be full of really quick DIYs
that do not take a lot of time to put together.
They're very simple, and I'm also going to be sharing
some really easy tips and tricks
for just throwing a really beautiful
and simple but affordable Thanksgiving dinner.
Now, if you are new here, I would love to have you join us
by subscribing down below.
Now, let's jump right into the first DIY.
To start off with this one,
because it is my favorite from the video.
So I'm starting off with a glass vase from Dollar Tree
and some of these beaded ears of corn.
Now, I picked up a bunch of packs of them
just because I thought that they were so beautiful.
I picked up each color that they offered and double of some.
And I think in this DIY,
I ended up using around five packages.
But it will just depend on how far
you want to space out each piece of corn.
So if you want to leave a bigger gap in between each one,
you might only need four packs.
So to attach them to my glass vase,
I'm just using my hot glue.
You can definitely use a stronger glue if you prefer.
This was basically just to get them lined up on the glass.
And then once I had all of them glued to my glass,
I did go ahead and add some twine at the end.
But right now, I just want to make sure
that they're all evenly spaced and secure on there.
Now, to make sure that they're not going to move
or go anywhere, I'm just taking some twine
and wrapping it around like this.
So I'm just bringing it to the front and then to the back
and just overlapping that a few times.
And then I'm just going to tie it
into a tight knot in the back.
This is just going to make sure that they don't move.
But also, I think it just adds a really nice rustic feel
that is perfect for the harvest season.
So now we have them all attached.
And the last step is just to add a faux candle.
This one here is my favorite.
I'll leave a link down below.
They do have faux candles at Dollar Tree
that are wonderful.
This one here is from Walmart.
It is very affordable.
And I love these candles because they have timers,
which is one of my favorite features.
And they have them in a bunch of different sizes.
So I will be sure to link those
in the video description box.
And here is how this one turned out.
I just think it is so pretty.
It's really substantial.
And if you make a few of these and lay them out on a table
or just around your home,
it is definitely going to give you that harvest feel.
This is one of my favorite hacks
for some really quick and inexpensive decor.
So I found this card at Dollar Tree,
and I just thought it would be the perfect,
beautiful piece of art to display on a table.
The colors are so nice.
It just says happy Thanksgiving.
And the leaves, they just all work so perfectly together.
I also found this frame at Dollar Tree
and just really loved that rustic feeling.
So the card is a little bit smaller
than the full size of the frame.
So I knew I wanted to add some backing.
Now, this frame does actually come with that white matting,
and you can go ahead and just use that.
That will work as well.
But I kind of wanted to bring out the orange
in the words happy Thanksgiving.
So I'm just gonna be using this piece of scrapbooking paper.
If you don't have scrapbooking paper,
you could also use wrapping paper.
If you have one that has a beautiful print
that you really like in the background,
that would also work for this.
So all you have to do is just cut it to size
for your background, add them into your frame,
and you are done.
Just add this next to some pumpkins,
and you have some perfect, beautiful Thanksgiving decor
that only cost a few dollars.
For this next DIY, I'm going to be using
the large galvanized bucket from Dollar Tree.
You can usually find this in their Crafter Square.
And I'm also going to be using
one of these plastic salad plates.
They come in a six-pack.
We're just going to be using one for this DIY.
Now, to get started, I just took off the rope
from my bucket.
I do wanna save it, though,
because I will be adding it back on.
But I just took it off for painting.
Now, you can paint these any color you like.
I love gold for the fall time,
and especially for Thanksgiving,
so that's what I decided to go with.
But you can definitely keep it traditional
and just use black instead.
So now that I have the bottom of my plate painted
as well as my bucket, I'm gonna go ahead
and just wrap my rope right around my bucket again.
I just used some hot glue to get started,
and then I wrapped it all the way around,
and I only had to use hot glue to secure in place
at the very end as well.
I didn't keep gluing it the whole way,
just at the start and at the finish.
I hope that makes sense.
So now that my bucket has its rope back on,
I'm gonna go ahead and just attach the brim of my hat
using some hot glue to secure these two together.
And I really like this DIY because Dollar Tree
usually tends to have both of these items year-round,
so they should still be in stock and easy to find.
And this is another DIY that you can make pretty quickly,
especially if you wanna make a bunch of them
and have these kind of set out around your table
for Thanksgiving.
They just make a really fun and eye-catching decoration.
The next step to really make this look like a pilgrim hat
is to add a belt buckle.
And the easiest way I found to do this
is just to use some of the vinyl paper from Dollar Tree.
You can always find this in their Crafter Square.
This is the kind that usually you'll see
used in a cutting machine, like a Cricut.
But if you don't have Cricut, don't worry.
You can just cut it by hand,
and it basically just acts like sticker paper.
So I just cut out a square,
and then I'm just cutting out a little square in the center.
And this is just going to create my buckle.
And I really like this because it's easy to work with.
And once you have your shape,
you can go ahead and just peel off the paper backing
and attach it on just like a sticker.
I'm just smoothing it out here on top of the rope,
and we are done.
We have our very simple pilgrim hat.
But I just think that this makes such a fun decoration.
It's something a little bit different and unique.
And like I said, really easy to make.
And I might just have to make a few more of these
to put around my Thanksgiving table.
This next DIY is a really fun one
and perfect to do with kids.
So I'm getting started with one of the chargers
from Dollar Tree.
I decided to go with this plain gold one.
I thought that it would make a really nice background.
And I also picked up some of the Mod Podge from Dollar Tree,
and I'm gonna be using the glossy one,
but Dollar Tree does have the glossy as well as the matte.
Now all you need are some window clings.
And once I saw these window clings,
I just felt like these were made for this DIY.
They're just going to fit perfectly.
So all we're going to be doing
is just creating a decorative charger
with some window clings.
So I'm getting started by just adding some Mod Podge
to my charger here.
And I am just using a regular paintbrush,
but I would really recommend using one of the foam brushes
from Dollar Tree.
I love to use that whenever I'm working with Mod Podge.
It's just my personal favorite,
and I feel like it works best
and you don't get those little bristles in the Mod Podge,
which sometimes you do get with a regular paintbrush,
but I didn't have any on hand,
so I was kind of just improvising.
And I ended up putting a little bit too much Mod Podge.
You do want to make sure
to have some underneath the window cling,
just so it sticks,
but you can definitely use less than I did.
I kind of went a little overboard with it.
So once I added some Mod Podge to my plate,
I just added my large window cling to the center.
And now I just went ahead
and added some more around the edge.
I'm gonna go ahead
and just start to add some more window clings on top.
And then once I have them situated,
I'm gonna go ahead
and just add another layer of Mod Podge on top,
just to seal everything down.
And you want to make sure
just to get those edges really good,
so they don't peel up.
And then you're just going to let this dry overnight.
Kids would really love this DIY.
And this is something you can do for all the holidays.
So definitely think about Christmas.
That's coming up really soon.
So if you ever see some window clings that you really like
and you want to incorporate them into a DIY,
this is just a simple way to do it.
And I do want to point out
that Dollar Tree does also sell these plate holders,
which work perfectly
for displaying your beautiful new charger.
And here is how this one turned out.
So simple and easy to put together,
but definitely a fun DIY.
For this DIY,
I'm gonna get started
with these two glass candle holders from Dollar Tree.
And you can just leave them clear if you like,
but I love this gold spray paint.
So I'm gonna go ahead and just spray paint them gold.
Now, I feel like this pairs perfectly
with these amber glasses from Dollar Tree.
I love the gold with that beautiful orange color.
Now, I do want to attach them together,
and I am just using hot glue for this.
These are my Gorilla Hot Glue Sticks,
which I do find have a nice, sturdy hold,
but you can definitely use a stronger glue
like E6000 if you prefer.
So just go ahead, add some glue to your candle holder,
and just add your glass on top.
Now, if you want to take it one step further,
grab some twine and just cut a nice long piece
and just use this to wrap around your candle holder.
I just think that it gives it a nice rustic feel.
Or if you prefer ribbon or even raffia,
that would also work as well.
Decorative tray is one of my favorites
that I've ever seen at Dollar Tree.
It is so gorgeous.
The color is so pretty,
and the delicate laced leaves on the edges,
it is just so nice for $1.25.
So I'm gonna go ahead and just add
my new candle holders to that tray.
And then I had some leftover corn,
and I just thought it would have a really nice harvest feel.
So I added that to the base,
and then the last step was just to add
some flameless tealight candles
that, of course, are also from Dollar Tree.
Another top find this year from Dollar Tree for the fall
was this table runner.
Another $1.25 find, and it is just so nice.
So I'm gonna go ahead and just lay it out.
It's that it has that really delicate feel to it,
just like in the chargers.
So I picked up two of these chargers this year,
and they are just absolutely stunning.
I love the delicate leaf pattern,
and they actually match the tray perfectly.
This was the tray that I shared in the last DIY.
So, of course, I had to get the whole set.
And this just makes such a beautiful
but inexpensive place setting.
So these two white plates are just from Dollar Tree as well
in their kitchenware area, and I just layered them on top.
And then I found these in their fall area,
and it just says wall decor on them,
but I thought that this would make
the perfect napkin ring holder.
If you're having guests, you can definitely personalize
the back with each guest's name,
and then they get to take it home at the end of the evening.
But I'm gonna go ahead and just add a little napkin
right in between and place this on top.
It's a really simple but elegant place setting
for this Thanksgiving.
This next DIY is going to be extra large
but still very affordable.
So I'm gonna get started using these three signs.
And I actually just really need the back of them,
but these ones actually did have that little hat on top,
and I do need them to be flat.
So I'm gonna go ahead and just pop that off first.
Dollar Tree does have a lot of these signs though,
so if you can find ones without the hat,
definitely pick those up instead,
but these also work just as well.
So once I removed the hat and had those prepped,
I did also remove the string,
and I'm just going to be using a piece of foam board
from Dollar Tree.
This is going to be the back of our sign,
and it's just going to make it extra sturdy
and give us a place to attach all of our boards to.
And to attach my board, I'm just going to be using hot glue.
I have made several of these larger signs,
and I always start off my base just like this,
and I feel like the hot glue works really well.
So you go ahead and just add a bunch of hot glue
to your sign and then glue it upside down to your board.
And I am using my Gorilla Hot Glue Sticks.
These are the ones I use for all my DIYs.
I always share these with you guys.
I just love them.
They're not that much more expensive
than regular glue sticks,
and I feel like they do have a stronger hold.
So I will be sure to link those as well.
So now just go ahead and add all three signs.
Make sure that they're all lined up properly in the corner
and just nice and secure to each other.
You will have a little bit of foam board left over,
and you can go ahead and just trim that off
with a craft knife.
Steph is going to be painting,
and I'm just going to be using
my favorite white chalk paint for this
because it does cover it up really quickly.
So now we have the base of our board,
and we get to decorate it now.
So for the center,
I'm just going to be using this placemat from Dollar Tree.
I just thought it was so pretty.
I love the gold color.
It pairs perfectly with all of my other gold items,
and it's just really beautiful and intricate.
So I just glued it to the center,
and I did make sure to leave a little bit of room
up top and on the bottom.
And I just cut out the words,
be thankful with my Cricut cutting machine.
If you don't have a Cricut,
you could definitely hand paint this as well,
or Dollar Tree does sell lettering
if you want to use those.
Or just leave it plain.
I think it looks beautiful with just the leaf.
And those are all of the DIYs for today.
I really hope that you guys enjoyed
these Dollar Tree Thanksgiving DIYs.
If you did, please do give this video a thumbs up,
and let me know down below which one was your favorite.
Hope everyone has a wonderful Thanksgiving.
Thank you so much for watching.
To subscribe to my channel,
you can just click on my picture right here.
