You'll NEVER 🤯 Believe These Dollar Tree FINDS! Dollar Tree DIY Crafts For Christmas

DIY Cute Things
114 followers
Comments are disabled for this video.
Christmas has arrived at Dollar Tree and I could not be more excited because we're going to start
with one of these little trees. You know we love them for crafting. I had this one left over from
last year so I'm just going to do something with it. I'm going to start fluffing it but I'm going
to fluff it with the bristles going downwards. So every little branch I'm going to make sure that I
fold downwards just because I'm going to pair it with a stocking and I want to make sure that it
fits inside and I'll show you. Alright so this longer piece at the top I'm just going to cut
a little shorter. Alright so here's the stocking that I'm going to use. This one's actually from
Dollar General because it was only a dollar and I thought hey I can save some money. Alright to
make it a little heavier on the bottom I'm just going to add some of these Dollar Tree stones
right inside. Again this is so that it doesn't tilt too much on me. Then I'm going to use some
of these Dollar Tree bags to fill in the stocking so it doesn't look flat but it has a little bit
of fullness inside. You can also use paper or stuffing whatever you want. Alright so now we're
going to take the tree and we're just going to place it inside but I'm going to show you how to
do it. You see the little stem in the back? We're just going to expose that and we're going to add
just the stem. You see that? I'm leaving the bristles on the outside of the stocking. Then
it's time to attach that. So I'm just going to make a slit because I want it to go a little
further down and then I'm going to attach it in the back with hot glue. Make sure that it's nice
and sturdy and not going to go anywhere. Alright so once I have it where I want it I am going to just
fluff everything. Of course you want to fluff trees. Please fluff them. I'm going to place
them wherever I want and then you can add lights, you can add berries, you can add flowers, whatever
you want. I'm going to add some of these little berries. They come in a pick but I'm going to
separate each one individually and hot glue them like little bulbs on the tree. A little hot glue
goes a long way and I'm going to do that until kind of like what I see. Then I'm going to take
some of these red picks also from Dollar Tree and I'm going to start adding them here and there
with a little hot glue. This is because we want to just add extra little texture color to that
bottom part. Now I'm going to take this glittery ribbon from Dollar Tree and I'm just going to make
a multiple loop bow, scrunch it in the middle, tie it with some string and then we're going to add
that to kind of like the bottom but we're kind of like just kind of hide it inside the bristles
and you see what I'm talking about. So I'm going to fluff it and then I'm going to hot glue it
right in there. You see that it's in between all the bristles. All right so we're almost done but I
want to add this little flower here on the top and then I'm going to add a piece of pipe cleaner to
the back so that we can hang it and then I'm going to add an extra little fabric with hot glue. This
is just going to make everything stronger and sturdy to it and that's about it my friends.
What a fun craft you can do this year. You can find all this at Dollar Tree or Dollar General
and I love the way it looks but let me know what you think down in the comments.
For the next Dollar Tree DIY craft we're going to take one other tree except this one's going to be
white. This one's newer so we're not going to use the base. We're going to remove the base and get
rid of that one. All right so this one we're also going to fluff all towards one direction except
we're going to keep them facing up and then we're going to take that longer piece and we're just
going to fold it behind it. We're going to pair it with one of these hats from Dollar Tree. I think
it's so cute. My daughter was already crafting with it but I did ask her to leave me that top
portion because it fits it right there so nicely and I'm just going to add hot glue inside and make
sure that it attaches. Now this is the leftover fluffy piece from another piece but it has that
nice like Santa hat style so I'm going to cut off a piece and I'm going to add it with these bulbs.
Now these bulbs you can find at Dollar Tree every Christmas season and I'm just going to add one
right inside and this is what's going to look like the nose. Hot glue it in place very carefully
then we're going to add that fluffy piece all around that rim at the bottom and this is going
to make it look like that nice hat look but also just kind of hide everything and look finished.
I want to add a little bulb to the top so Dollar Tree carries this little faux snowballs which I
think are adorable for indoor snow fights but I think it's cute to add for crafts. I'm just going
to add one to the top of the hat and then some cute little embellishments like these little
greenery pigs that I get on Amazon. I do have them in my Amazon store if you want to check them out.
It is linked below. You can also use Dollar Trees if you want. I'm going to add some cute little
red flowers and just little things whatever hat around it does not matter. So I'm just going to
add another piece of pipe cleaner, hot glue it in place and cover it up with some leftover of that
fluffy fabric right there. It just looks nice and finished and that's it. Oh my word how cute.
You can even add fairy lights to the beard. Love it but what do you think? Let me know down in the
comments. For this next Dollar Tree DIY craft we're going to take one of the Dollar Tree's pizza pans.
We're going to remove the paper of course and we're going to wipe it really well and take it
outside and spray paint it white and I know it doesn't look like it's spray painting but it is.
It was just a bright day. I used my Cricut to create a decal that says Santa please stop here
and I love the way this font turned out. Oh my word. I'm just going to place it very carefully.
Now I did spray it with a top clear coat after the spray paint dried because I did not want to risk
the transfer tape pulling some of it. Now you can add some of these magnetic numbers that you can
find online and create like a little countdown just like that or you can add a little piece of
white glossy vinyl. Now this one's from Dollar Tree but any vinyl would be fine. You can also
use clear tape if you have that. I'm going to place it right there and this is what we're going to use
then to use as a countdown. So we're just going to add the numbers and then you can just erase them
and keep adding them as you need. So fun. All right but of course you want to add something else to it.
This is the Dollar Tree Santa hat. This is more traditional and we're just going to hot glue it
in place right there. A little bit tilted to the side just to give it a little bit of character
but you can add it directly on top. I'm just going to keep hot gluing to kind of see what I like.
Then I'm going to flip it over because I do want to add something towards the back
so that the hat kind of sticks up just a little bit. You'll see here in just a second
because it just flimsies down right. So I'm just going to add a piece of foam board not foam board
cardboard and I'm just going to hot glue it in place. This is going to give me a few extra inches
on top. So when I fold it you see it's not going to fold all the way down to the pizza pan but just
where the cardboard is. I folded it and hot glued it in place and I'm just going to add again some
little extra embellishments. You can add whatever you want. I added a poinsettia and some green
leaflets. Of course we want to hang this one as well so I'm just going to add some jute string
to this one with hot glue and I am also going to use masking tape to hold it in place nice and
strong and I think this is adorable. Oh my word love using pizza pans for crafts. What do you think?
Let me know down in the comments. For this next Dollar Tree DIY craft we're going to take some
Dollar Tree vinyl. Now that I know that they're discontinuing their vinyl if you can still find
them go find them they're like 50 cents great deal. I had this one left over from another year
and I'm going to pair it with one of these metal pieces that you can find at Dollar Tree pretty
much year round. The one I'm going to use has kind of like a pop bottle top. Do you know what I'm
talking about? Oh my gosh it also looks like a pie pan which I get but it kind of reminded me of a
pop bottle. Anyways I cut up a piece that's about nine inches wide and I'm going to place it in the
center but a little bit more towards the bottom making sure that it's nice in the edges and then
using my x-acto knife to remove the excess. I'm going to take another vinyl this time it's going
to be in red and I want to write the word joy on this middle section so I'm just going to measure
kind of like the space that I have and then I'm just going to freehand the letters using my ruler.
If you have a Cricut you can use your Cricut as well but I wanted to give you an alternative so
that if you don't have one it's so easy. I'm going to take a pot and I'm just going to make the O
with it and then again using my ruler I'm going to make the J and the Y as best as I can cutting
with scissors as well as the x-acto knife. All right so now I'm just going to place some light
stickers. I'm going to start in the center with the O and then work my way to the sides. This is
why I measured because I wanted to make sure I had enough room. All right so I'm just going
to add them in place and then of course we have to add embellishments. I'm like the embellishment
queen. Anyways I'm going to add some of this foam from Dollar Tree at the top and then hot glue,
some florals, some pigs. These are from a combination of Dollar Tree and Amazon. Just
whatever you have just use it. I just like finding things on Amazon because sometimes you get more
bang for your buck. You know what I mean? All right these ones with the berries are from Dollar Tree
and it already has the hanging piece so I'm not going to add a hanging piece although you can
update it if you want. I added a pine cone and how cute is this? It's so unique. Never seen anything
like this one before. I'd love to know what you think of this one. Let me know down in the comments.
For this next Dollar Tree DIY craft we are going to take one of these little trivets from
Dollar Tree and I'm going to remove the plastic of course and then I'm going to pair it with
more vinyl but first I print it out on regular paper and printer this nativity scene. I'm going
to cut it off first with the scissors just the excess paper and then we're going to use this
vinyl. It has a nice kind of like glittery finish to it so I'm just going to cut off a piece and
then I'm going to use carbon paper method to transfer it. Now if you have a cutting machine
again like a Cricut go ahead and cut it with your Cricut. Much easier and faster but if you don't
have one this is another way that you can use to create your own decal. I'm going to trace the
design using my tracing tool with the carbon paper in between and I'm tracing it on the back of the
vinyl. Then very patiently I'm just going to use my x-acto knife and I'm just going to cut piece by
piece so that I have four pieces or five pieces and then I'm going to use them just like stickers.
I really love using these vinyls and I'm so sad they're discontinuing them but it is what it is.
All right so I'm just going to start placing one piece at a time and then I want to create a nice
base for this. Now I've created different bases for plates and other things. For this one we're
going to use this piece of scrap wood that I just had in my garage and this piece of wood this one
here I think it's from Home Depot. I don't know where it came from but I'm just going to cut two
pieces and I could use my miter saw but I do have a miter box and if you don't have a miter saw
and you feel more comfortable using a miter box I found this one on Amazon and I do have it on my
Amazon store. All right so I'm just going to sand down those edges to make sure they're smooth
and then I'm going to attach them onto the board. I'm just going to pre-drill some holes and then
I'm going to add screws and the reason why is because I do want this to be secure and I also
want to add lights and I'll show you. I'm going to paint them white so that it blends in with the
base and then I'm just going to start attaching them with screws. Then I'm going to paint them
again to cover everything even the screws and then we are just going to add two more screws
and this is why because we want to roll the light on the screws. I thought of many ways I can do
this and I thought this would be the easiest way. Once the paint was dry I'm just going to take the
plate I'm just going to dry fit it make sure that it fits it's not going to tilt and it looks so
good. All right we're going to add some greenery to it so of course embellishments. I'm just going
keep adding what I have friends this large poinsettia right in front of it. All right so
here are the fairy lights so I was thinking of ways if I can attach it I'm just going to add
two more screws. These are going to be on the back of the base and they're going to stay up about half
an inch and then I'm just going to roll the lights from each one see that and then we're just going
to attach the battery pack with hot glue on the back and then when you turn it on it looks gorgeous
wait until you see it turned on oh my word love this one I love the nativity because it is the
reason for the season right and I'd love to know what you think let me know down in the comments
for this next Dollar Tree DIY craft we are going to take some burlap ribbon
now this one is from burlapfabric.com I believe I've had it for so long I'm going to cut two pieces
one that's about 18 inches long and one that's about 12 inches then I'm going to cut two pieces
of Dollar Tree ribbon in the red this is going to be a little thinner but in the same length and
I'm going to stack them on top of each other you see that all right so now we're going to take a
pipe cleaner we're going to fold it in half and cut it then we're going to take the both longer
ones we're going to fold them kind of like towards each other looping them and then scrunching them
in the center and taking some of the pipe cleaners or one of them and we're just going to twist it
in place you could also use jute string if you want but pipe cleaners works really well
then we're going to fold it in half just like this and then we're going to take the other one
and we're going to do the same thing we're just going to fold it towards each other looping them
scrunch it in the middle with the other piece of the pipe cleaner and tighten it together we're
creating an angel ornament you're going to love this one and you can do it with any ribbon even
fabric all right so now we're going to join them we're going to add the little one inside of the
larger one and twist those pipe cleaners you see that so cute then we're just going to lightly
hot glue just to keep that top portion just kind of like centered and a little bit thinner you see
how i'm just crunching it just a little bit all right on the top you can add whatever else you
want you can add a wooden round a bead i just decided to add one of these red bulbs because
i feel like it matched and i also didn't have a wooden one but i think a wooden one would have
looked better i removed the hardware from it and i'm just going to hot glue it right on top
literally keeping the like the little sticky part towards the ribbon now i'm going to add a little
halo so i'm just going to add a glittery silver pipe cleaner roll it around a few times to itself
and with a little bit of hot glue we're just going to add it on top if i had a golden one
i think it would have looked better but i'm just working with what i have then we're going to add
one more pipe cleaner this is what we're going to use to be able to hang it and we're just going to
add it towards the back hot gluing it in place and i think this is so adorable oh my gosh you
can make little baby ones larger ones whatever you want so fun and easy but what do you think
let me know down in the comments i have another video here for you with tons more of dolletry
diy crafts inspiration check it out i'll see you later and have a blessed day bye
