15 Stunning Fall DIY Decor Ideas to Make Your Home Cozy in 2024!

Holiday Decorations
97 followers
From making your own Starbucks-inspired drinks
to making gorgeous fall wreaths,
fall is one of the best times to do cozy DIYs and crafts.
Today, I'm gonna share with you
my absolute favorite DIYs for the season.
Let's get started.
Let's start by grabbing the Inga Brita blanket from Ikea.
I love this blanket because it's affordable,
it's soft to knit,
and it's an amazing base for some cozy DIYs.
Next, I'm creating some giant pom-poms
with this pom-pom maker, which I love,
and I'll link in the description box below.
I'm using a chunky off-white yarn
that closely matches the color of the blanket.
After I've made four pom-poms,
I'm attaching one to each corner of this blanket
using a crochet hook, some extra yarn,
and some simple square knots.
I'm weaving any loose ends through,
and this blanket is all done.
I love the cozy texture,
and it's a simple and affordable DIY for the fall season.
I'm starting with this inexpensive flannel scarf
from Dollarama and finding a cushion insert
that's about the same width.
Next, I'm cutting the scarf into two pieces
for the front and back of this pillow.
I'm making the pieces exactly the same height
and width as the pillow insert
because the final cover is going to be slightly smaller
than the pillow insert for that fluffy look.
If your scarf has fringed ends like mine,
don't include the fringes in the measurements.
Make sure there's a fringed end
on the opposite sides of each piece.
Now I'm laying the two pieces right sides together
and pinning them in place.
I'm folding the fringe to the inside of the pillow cover
and then sewing around the perimeter of the pinned pieces
using my sewing machine and a half inch seam allowance.
If you prefer, you can also use fabric glue
for this instead.
Leave a hole that's about six inches long
at the bottom center of the pillowcase,
and then I'm turning the pillow cover right side out,
inserting my insert,
and then stitching the hole shut by hand.
Now I have this soft and cozy pillow for my sofa
that adds some comfort and pattern
into my space for the season.
To make a beautiful fall lantern,
I'm cutting some scrap two by two pieces of lumber
into 11 by seven and a half long pieces,
two 10 and a half long pieces,
and then four 21 inch long pieces with my miter saw.
Then I'm staining my pieces with this gray brown stain,
then placing seven of the seven and a half inch wood pieces
in a row and sandwiching them
between the two 10 and a quarter inch pieces.
I'll leave a link to the written tutorial for this one
down in that description box below.
I'm using a finishing nail gun to nail the pieces together.
Next, I'm putting the base on its side
and positioning one of the 21 inch wood pieces
to one of the corners of the base.
I'm then nailing the two pieces together with a nail gun
through the bottom of the base
into the end of the tall wood piece.
I'm repeating this step for all the four long pieces.
Then I'm putting some wood glue on the ends
of the remaining seven and a half inch long wood pieces
and placing them between the top ends
of the vertical 21 inch long pieces.
I'm securing them together with a nail gun
and adding glue to these pieces so they won't spin.
Finally, I'm creating a handle by cutting the end
of a wire clothes hanger off with wire cutters,
bending it into a lantern handle shape
and wrapping each end around the top sides of the lantern.
I'm using pliers to twist the ends together
to secure the handle.
Now I have a cute wooden lantern using wood scraps
that's so fun to decorate seasonally on my porch.
And this would also make a gorgeous table centerpiece.
Making your own Starbucks inspired drinks for the season
is a great way to save some money
and also make a healthier version
of the popular coffee drinks.
Here's how I make two of my favorite fall drinks
inspired by Starbucks.
The first one is the pumpkin cream cold brew.
I figured out a really easy way to make this.
First, you use the three, two, one method.
So in a glass place three tablespoons of heavy cream,
two of milk and one of maple syrup.
You can also use vanilla syrup.
I just like using maple syrup.
You're going to place one tablespoon of pure pumpkin puree,
not pumpkin pie filling, just the plain puree.
Make it at home or buy it canned.
Then add about half a teaspoon of pumpkin spice mix.
You can buy it pre-mixed or you can also make yours at home.
I'll leave my recipe down in that description box below.
Then you're going to whip this up
with a handheld frother.
Mine's an inexpensive one from Amazon.
I'll also link this in the description box below.
Whip it until it's nice and foamy for about a minute.
And then you're going to take a tall glass,
place some ice in it, place your cold brew inside.
I make cold brew myself.
You could just buy some too if you want.
And then you're going to pour this pumpkin cream on top,
put a straw in there and mix it together.
And oh my gosh, this is so delicious.
Definitely a must make.
And I have the printable recipe linked
down in the description box below
if you want to save this for later.
If you like hot drinks instead,
definitely try my DIY pumpkin spice latte.
You make your own syrup that is pumpkin inspired
that you can use over and over again.
And this is really easy.
In a saucepan on your stove on medium,
place half a cup of brown sugar,
three quarters cup of water,
a third cup of pure pumpkin puree,
and then a tablespoon of pumpkin spice mix,
DIY'd or pre-mixed.
Bring that to a rolling boil
and let it simmer for around two minutes.
And then you're going to strain that into another bowl.
You just kind of want to get those chunks out.
You're going to use the liquid that is strained out.
Place that in a jar.
It's going to thicken up a bit
and then you can use this over and over again.
You put two shots of espresso into a mug,
stir in one to two tablespoons to taste
of your DIY pumpkin spice syrup,
and then top that all off with some hot steamed milk.
And this is so yummy.
Save that syrup in the fridge for up to a week
to use throughout the week.
And I hope you love this one as much as I do.
Let's make some beautiful textured landscape art
for your mantle.
To begin, find some of your old wooden framed sign art,
like the one I have above.
If you don't have old sign art,
you can upcycle similar large DIY wall art
using a thrift store frame
or start with a wooden framed canvas from the dollar store.
Next, find your favorite vintage landscape art file on Etsy.
There's tons of shops that offer inexpensive downloads
for gorgeous antique and vintage landscapes.
I'll link my favorites down in that description box.
Have your file printed at your local print shop
or copy shop.
I always use staples as a full color poster
that's the same width and height
as the inside of your sign's frame.
If you can't make it exactly the same size,
make it slightly larger and then you can trim it to fit.
Then apply some matte Mod Podge
to the old sign inside the frame.
Use a generous amount
and spread it all over your art with a foam brush.
You may want to put your art on a large drop cloth
before applying the Mod Podge because it can get messy.
Now it's time to add the printed vintage art to the frame.
Smooth the art onto the Mod Podge.
Use your hands or a brayer to smooth it
so that there are no wrinkles or ripples.
Finally, use more Mod Podge and a foam brush
to seal your DIY wall art.
You can even add some texture to the art
to make it look like a painting by using a stiff brush
and making some crisscross textured strokes
and stippling effects in that Mod Podge.
Let your art dry, hang it up on your wall
or display it on your fireplace mantel in your living room
and enjoy your beautiful vintage art.
To make a beautiful decorative blanket ladder,
I cut four pieces of 3 1⁄4-inch wood dowel
to 14 inches long with a handsaw
and left two dowels at 14 inches long.
I'm making a mark nine inches from the bottom
of one of the 48-inch dowel pieces.
Then I'm marking 2 1⁄2 inches from that mark.
I'm repeating this until I have marks
for four 3 1⁄4-inch copper pipe Ts
and doing the same on the second 48-inch dowel piece.
Now I'm mixing some epoxy
following the manufacturer's directions
and applying it within the marks for the copper Ts.
Next, I'm inserting the end of the wooden dowel
into a copper T fitting and sliding it between the marks.
I'm repeating this for the rest of the copper Ts
and then applying epoxy to the inside
of the horizontal part of the fittings.
Then I'm sliding the 14-inch horizontal dowel pieces inside
to create those ladder rungs.
As a finishing touch, I'm applying epoxy
to the inside of some copper pipe end caps
and sliding those into the ends of the 48-inch dowel rods.
Now I'm gently pushing everything in place
and laying it flat.
You can wipe away any excess glue with an old rag.
You're going to want to let the epoxy cure
for at least 24 hours before using the ladder for blankets.
I absolutely love how this turned out
and it's lasted me for years.
This decorative ladder is a beautiful spot
for displaying cozy blankets and quilts
and the combination of the copper and the wood is so pretty.
To make a romantic fall wreath,
start with an 18-inch grapevine wreath base.
I love grapevine wreath forms
because they hold all of the faux floral so well
and can be used over and over again.
Curve two faux pampas stems
to match the shape of the wreath base,
insert them into the middle left of the base
and tack them down with hot glue if you want.
Next, attach some larger flowers
to the center left of the wreath
where the pampas stems meet.
I stick the stem of my florals deep into the wreath
and only use a small amount of hot glue.
Now, layer in some smaller florals and faux pumpkins,
tacking as needed with your hot glue gun.
The goal is to have the majority of your elements
on the center left section of the wreath
and taper them out from there.
Finish the wreath off by inserting
and gluing down some faux olive branches
at the top and bottom of the floral area
and finish by adding some faux fall leaves.
You can fill any bare spots in the wreath as needed
with more smaller florals and greenery.
To make an adorable seasonal doormat
with your Cricut cutting machine,
access the design space project file
that I have linked in the description box below
and cut it onto stencil vinyl with your Cricut.
Weed out the letters from the vinyl sheets.
Now, trim the inner edges of the vinyl sheets with scissors
so that the letters match
when the sheets are placed together.
Then, apply transfer tape to the sheets
and remove the backing from the vinyl.
Center the design on top of the doormat,
press the vinyl down and gently remove the transfer tape.
I'm just using an inexpensive Dollarama doormat.
Next, apply black paint in a dabbing motion
to the stencil with a stencil brush.
You're gonna need two to three coats of paint
to make sure that the letters are nice and visible
and then once the paint is dry, remove the vinyl stencil.
Finish your mat with a protective coat
of very thin polyurethane spray
to keep your design looking fresh and lasting.
This mat looks so pretty
layered over a larger rug on your porch
to celebrate the fall season.
Don't forget to add some pumpkins and mums.
This simple DIY centerpiece
takes 15 minutes or less to put together
and I think it looks so gorgeous as a fall table feature.
To begin, line a narrow wooden dough bowl with floral foam.
You can cut the foam to size
and then cover that foam with some moss.
This one's just from the dollar store.
Insert some toothpicks or small wooden dowels
into the bottom of a small faux pumpkin.
These are also from the dollar store
and insert that into the foam.
Continue inserting pumpkins randomly all over the dough bowl
and then you can insert some faux fall leaf stems
into the foam.
You can cut the stems into smaller sections
to spread the leaves throughout the centerpiece
and also save some money.
Finally, place more moss and pine cones
in any bare spots in that centerpiece
and you can use a different variety of moss
for more interest.
I placed my dough bowl centerpiece
in our breakfast nook table
and added some other simple fall themed elements
in soft whites and greens
and I love how this calm
and beautiful fall table turned out.
When I saw this wooden artist panel at Dollarama,
I knew flipping it upside down would make the perfect base
for a DIY wooden tray for fall.
I'm staining it with some leftover wood stain all over
and then letting that dry.
Next, I'm adding some peel and stick tiles
to its base inside and these are also from Dollarama.
I'm cutting up a leather belt from the thrift store
to make handles and I'm using some screws
and my drill to attach the suede handles
to each side of the tray just like this.
So easy and so cute.
I'm styling the tray beside my espresso machine
on my dining room sideboard,
adding some other budget-friendly elements
like mugs and pumpkins from the dollar store
and this sweet and easy fall coffee station
and tray is complete.
You can use this tray for other things around the house
and it's so budget-friendly to make
from thrift store and dollar store supplies.
To make your home smell absolutely incredible
and cozy for the season,
try making a simmer pot from food scraps.
In a shallow sauce pan on your stove,
mix together two cups of water,
some peels from one orange,
peels from one apple,
two cinnamon sticks,
a teaspoon of whole cloves
and a teaspoon of vanilla or a vanilla extract.
Now bring the pot to a low simmer
and leave it on your stove to fill the house
with a beautiful autumn scent.
I find this works in about 10 minutes
and then I can just turn my stove right off.
This is one of my absolute favorite
stovetop potpourri recipes.
You can even bottle up the mixture
and pop it in your fridge to simmer again later.
Your house is going to smell absolutely cozy and incredible.
This is one of my favorite cozy DIYs for fall
and it's easier than it looks to make.
For this chunky knit blanket,
I'm using six skeins of Yarnspirations
Bernat Blanket Big Yarn from Michaels,
but I'll leave some alternatives down
in that description box below.
Holding the yarn, make a loop about eight inches
from the end.
Take the loop and place it over your four fingers,
then loop the yarn over your fingers again,
pulling it through the first loop you made.
Now you've created a loose slip knot.
Continue doing this until you have a long chain of loops
and these are going to form the foundation of your blanket.
I made a chain of 24 stitches with this yarn
for my four foot wide blanket.
Once you have your loops,
it's time to start working your blanket.
Flip your chain so that its tail is on the left hand side.
Take the final loop you made
and pull some more of the working yarn
through it, creating a new loop.
This is the first stitch of your next row.
If you'd like, place three fingers through the loop
and tighten the working yarn gently around your fingers.
You can do this with each loop
so that they're consistent size.
Then put your fingers through the next chain
over on the row below
and pull another loop of the working yarn through that.
Repeat this process until you finish creating new loops
for the next row across the entire chain.
For this blanket, that's 24 loops.
Once you're finished your first row,
you'll repeat this process going the opposite direction
to create your second row.
Continue in this manner, going back and forth,
creating new loops until you only have
about three to six inches of yarn left on your skein.
When your first skein of yarn is almost done
with about three to six inches left,
attach some new yarn from a new skein
by tying the end of the new yarn to the previous one
with a simple square knot.
Continue knitting back and forth
until you either want to add more of the same color of yarn
or start a new row in a new color.
Once you've reached the desired length,
it's time to finish your blanket.
You're going to finish your row
and make sure you have enough yarn left on your skein
to cast off your blanket.
The length of yarn will need to be
about twice the width of your blanket.
Start the final cast off row by creating two loops
into the previous row as per usual,
then pull the first loop over the second one,
holding onto the second loop.
Make sure that these loops are on the larger side
so you don't have a gathered or tight finish to your blanket.
I use all my four fingers to measure inside each loop
to make sure they're big enough.
Continue this final row in the same manner,
creating another loop, pulling the previous one over it
and making sure each loop is generously sized
for that nice, relaxed edge.
Once you're done the final stitch,
cut the yarn, leaving a long tail
and then pull the end through the last loop to secure it.
Finally, weave in the loose ends
to make sure your blanket looks neat and tidy.
Make sure that you're tying any yarn ends together first
as needed, and now you have a thick and cozy blanket
that you can use in your own home this fall
or give it as an amazing and a fabulous gift.
If you want to turn a plain round cutting board
into cute fall decor with your Cricut cutting machine,
open up Cricut Design Space and create a new project.
Click on the images menu
and find your favorite fall text image to use
for your cutting board and insert it into your project.
The image I'm using here
is called Pumpkin Spice Everything Text
and I'll link it in the description box below.
Resize the image so that it fits on your board
with about an inch of room all the way around.
Place some removable white vinyl onto your Cricut mat
and then send your design to your Cricut machine.
Once your design is cut onto your vinyl,
weed away any of the excess,
place some transfer tape on top of your design
and smooth it down.
Now flip the design over
and carefully remove the vinyl backing.
Center the design on your cutting board and smooth it down.
I chose to have mine slightly higher on my boards
that it wasn't on the marble portion.
Finally, carefully remove that transfer tape
and your simple DIY fall cutting board is complete.
I styled mine on my kitchen counter
and I love how it turned out.
To make a stunning fall centerpiece,
start with a real or faux pumpkin.
Mine is real from my local pumpkin farm.
Apply some hot glue to the top of your pumpkin
around the stem area
and then press a layer of moss firmly onto the hot glue,
spreading it out over the top of that pumpkin.
Repeat these steps until you've covered
about the top quarter of the pumpkin
and make the edge of the moss kind of irregular
so that it looks more natural.
Next, arrange some faux succulents within the mossy area
and make sure that they all fit within that moss portion.
If your succulents have long stems,
you can use some scissors to trim the stem
so that it sits nicely on top of the pumpkin.
To give your centerpiece a more natural look,
use a variety of sizes and textures.
And also, I find that using an odd number of succulents
always looks best.
This makes a beautiful centerpiece for your fall
or your Thanksgiving table
and it's also a fun craft you can try with the whole family.
Thanks so much for watching today's video.
I hope you enjoyed these autumn DIYs.
Let me know down in those comments below
which of these was your favorite.
I would love to know.
I love using Dollar Tree items to make fall DIYs
because it is nice and budget-friendly.
So I have 10 incredible Dollar Tree DIYs for fall
that you'll wanna do next.
I'm gonna leave the video for you to watch next
right up here.
