Welcome to my new Patreon series on making a maquette figure in oil-based clay. This tutorial series is about working from our knowledge of anatomy and imagination at a small scale. We’ll be making a 1/6 scale male figure in oil-based clay using basic rules of proportion along with some common sense and easy to use anatomy knowledge. This video series is for you with limited space and budget wanting to get into sculpture.
This episode we'll work on and hopefully finishing the sculpture. Enjoy!
The full video is available to my Patrons who support me with $10 or more. The full length video is over 1 hour long and full of valuable information. To support me on Patreon and watch the full video: http://www.patreon.com/eirikarnesen
My name is Eirik Arnesen, I'm a sculptor from Norway, living and working in Florence, Italy. I teach sculpture at the Florence Academy of Art and on this channel I'll share with you every step of my process, discussing materials, tools and techniques. Eventually you'll find tutorials on how I go about sculpting everything from a portrait to a life-size figure.
Now it's time to introduce the Buffalo Alcohol Torch, which is a little bottle that I filled
with flammable liquid.
It has a wick and a little metal arm that blows air on the flame when we squeeze the
bottle.
We're going to use this tool to melt the clay and create interesting textures that we couldn't
achieve without the use of such a tool.
Sometimes the wick gets too burnt and you have to disassemble the bottle and pull more
This helps the wick light properly again and burn without issues.
The alcohol that the bottle is filled with is some sort of flammable liquid meant for
cooking out in nature, I believe.
So the reason you use something that's meant for cooking is because it won't create as
much soot and soot just gets on your sculpture and turns it into a bit of a charcoal-y mess.
So that's why you use that type of flammable liquid.
I'm not entirely sure what's in here, I think it's perhaps denatured alcohol or something
called red spirits, but I can't really remember what I put in there.
The reason I use this tool, which is manual of course and a bit more tricky to work with
compared to a kitchen blowtorch like one you would use to burn your creme brulee with,
is that this tool burns much slower and it's easier to control the melting of the clay.
Oil-based clay does melt, which is why this trick works of course, but it can also be
burnt if you melt it too quickly or too much.
If you melt it way too much, you can also destroy more of your surface than what you
intend to destroy and you can sort of melt the whole sculpture apart.
A small butane torch for kitchen work would also do wonders here, but tread lightly when
using such tools because they do melt the clay really fast.
The manual buffalo alcohol torch, and that's a brand name I believe, is very helpful since
it's slow and doesn't affect the clay surface that much when we use it.
This allows me to control the effects that I'm having on the clay.
If you wanted to move more quickly from a soft surface to a firm surface when using
such a tool, you would need something to cool the clay down with quickly.
While I'm not going to do it here, what you could do is use a spray can with air, which
is often sold to help clean electrical components like computers and stuff, and you can turn
it upside down when spraying.
This will spray out a very cold spray, which will freeze the clay firm immediately.
Now I'm too slow-paced and Italian these days for such tricks, I'll just go get a cappuccino
while the clay goes back to its original state.
So I won't be using that tool today, but that's a good trick that you can keep in your backpack.
Depending on your clay, you might find different results using a technique such as this.
Not every oil-based clay is going to be formulated the same way, and some of them melt at very
different temperatures and in very different ways than others.
Some go very liquid very fast, and others turn sort of gooey before turning into a liquid.
Definitely do some testing before trying this at home and melting your entire sculpture
off the armature into a puddle.
This trick will only work on oil-based clay or wax.
Water-based clays will only dry out of course, but perhaps there are some fun tricks there
that could be possible to try out, like some crackling effect or something like that.
But I haven't experimented much with this tool on water-based clay just yet, so I'm
not really sure.
When we rake, we go across the forms.
Doing this is key to making sure that what we've done before continues to stay evident,
and that we simply affect the surface mainly and not the underlying anatomy and forms.
Exactly why this is the case, I'm not entirely sure, but in general it seems that raking
across the forms allows us to maintain what came before and simply clean it up a bit,
as opposed to raking with the forms, which seems to ruin what we've done before.
From a rendering perspective, we've seen similar techniques deployed by draftsmen using pen
and ink for hundreds of years, and continue to see this very similar technique even in
modern media like comic books and manga.
Take a look at most comic and manga artists working today, and their rendering technique
is going to rely heavily on this type of crosshatching, which travels across the form, and you can
see the same thing in unfinished marbled sculptures by Michelangelo.
It doesn't only work in drawing, of course, but also in sculpture.
If you wanted to leave your sculpture with visible rake marks, and I do think that's
a valid choice as far as finish goes, then making sure that the rake marks have some
rhyme or reason to them and frankly look good is important.
You can test it out yourself and see which pattern of rake marks you prefer to leave
behind, and I'm willing to bet that most of you is going to choose a pattern where
the rake marks travel across the forms.
Reason for this is that across the form helps accentuate the surface anatomy and the volume
that we've worked hard to establish, and raking against the form sort of buries it
and makes it impossible to see, makes it hard to comprehend.
Even though I don't plan on leaving this sculpture with visible, very visible rake
mark texture, at least not in a lot of places, I think it's still much more beneficial
for us to rake against the form and not with the form.
The final surface texture of your sculpture is all about choice.
What dictates that choice can be many factors, of course.
Certain sculptures sort of demand a certain kind of finish and some other sculptures will
demand a very different kind of finish.
There are few rules other than the ones you decide for yourself in this realm.
My choices are usually going to be based on subject, so if I'm sculpting someone really
old I am much less likely to make a smooth texture.
The texture can do some of the heavy lifting in terms of telling a story of somebody older
with more wrinkles.
Concept or story-slash-idea can also be something to consider when deciding on the surface texture.
Famously, Knight by Michelangelo is polished to an almost mirror finish to reflect the
moonlight and appear cold and dark, as compared to her counterparts in the room in the chapel
with a slightly less polished finish.
There are also theories which revolve around the high polished finish being a way of suggesting
knight sweats from nightmares, though she seems to be sleeping rather calmly for a nightmare
to be taking place in my opinion, so I don't know.
I find ideas like this to be very fascinating, though a lot of these theories seem perhaps
a bit far-fetched sometimes.
The idea of finish being part of the concept and helping say what you want to say, that's
a very cool idea and something that's perhaps a valuable tool to keep in the toolbox as well.