Welcome to Part 5 of my FULL walkthrough of CIE A LEVEL Maths. We're doing the Trigonometry topic for Paper 1 so be sure to check all your skills before moving on!
Please email me at [email protected] to enquire about tuition online or in person!
Hey guys, just to let you know this lesson is in collaboration with Flip Academy, a free online platform for all of your GCSE, A-Level,
IAB and CBSE revision, out now on web at
www.flip.academy and also as an app for Apple, iOS and Android. It really is better than all the other
GCSE platforms out there. It covers all the topics in great depth and has an app that you can download your courses on and use offline.
Hello and welcome to Flip Academy. Today we're going to be looking at the first section of the trigonometry
part of the specification. So this is specifically looking at 1.5.
So the first thing you need to do is sketch and use graphs of the sine, cosine and tangent functions
for angles of any size and using either degrees or radians.
So just as a reminder, in order to go from degrees to radians, so deg rad,
you're just multiplying by pi over 180.
So to get back the other way, you just divide by pi over 180. For some normal kind of things that you might want to,
normal conversions that you might want to remember is
0 is obviously 0, then you have 90 degrees, which is pi over 2,
180 degrees, which is pi and
360 degrees, which is 2pi. Those are just some common ones that you're going to see recurring. So let's go through it, shall we?
So we need to sketch the graph of y equals 2 cos x between minus pi and plus pi, so effectively it's between minus 180 degrees and
plus
180 degrees. So we should hopefully know what the cos x graph looks like.
Right, it starts off at its maximum value and then it goes down and then so on. So in this case,
maximum value normally is 1.
However, since we're multiplying it by 2 because of this part of the equation here, it's going to start at 2 and go down to
minus 2.
Okay, so this happens at 0pi, then at pi over 2 it goes through
0 and then at
pi it goes here. So on the other side, it's going to be just a complete reflection of this, so it's going to go down
and again, this would be here,
pi over 2, except negative, and this side here will be minus.
And that's what we really need to do for that question. So a quick two marks, not too bad.
This is point P and Q along the curve and they have x-coordinates of 1 third pi and pi
respectively, and we need to work out the length of PQ.
So with PQ,
what we want to do first is work out what the y-coordinates are. So we have a third pi,
so now all we need to do is work out what it is.
So whenever we're dealing with trigonometry, we need to make sure that we're in the right mode.
So at the moment we're in degrees mode, which we see that capital D is highlighted.
So shift menu, angle unit, and then radians, and then what we can do is we can just type in 2
cos
1 third pi, and that will give us our value.
And it's 1, perfect.
And then
Q is pi, and we can sub the exact same thing in, just delete the
fraction, and we get negative 2.
So in order to work out the length of a line, what we can do is essentially just work out,
where essentially what we're doing is we have two points, right, with these coordinates, and I know this isn't actually
kind of to scale, so all we're going to do is basically
use
Pythagoras to find out the length, right, where the x along here is just going to be pi minus a third pi, and
here is going to be just the difference between
minus 2 and 1, so minus 2 minus 1. So that equals minus 3, or 3, doesn't really make a difference,
and this would be 2 pi over 3.
So the actual length
is just equal to, again, we're just going to be using Pythagoras, so square root
2 pi over 3 squared
plus minus 3 squared, and this will give you the answer to a single decimal place. So let's get to it.
So square root, and then open bracket,
2 pi over 3 squared
plus minus 3 squared, and that will be our answer, 3.7
units. We don't know what the actual
values are.
Okay, so a few kind of key things that we've gone through now is making sure you check your
calculator for degrees versus radians. You need to do that
every single time you come across trigonometry, just think about what units you're using.
We have sketching the graphs and also transforming them,
conversions between degrees and radians by hand, and then also calculating the length of a line.
So the next thing is you do need to know certain exact values for sine, cosine, and tangent of 30, 45, and 60
degrees, so this can be kind of
tricky, but you do need to remember it for your non-calculator papers, so
keep an eye on that.
I can go through a couple of them now, so sine 30 is just 1.5,
and we can go on and on from that, so that should be
root 2 over 2,
and then sine 60
is just, should be root 3 over 2. So there is a little trick that I can show you to kind of help with this.
So
where we can look at it is you have 30, 45, and 60, and what you can think of is it's just
going up in ones, right?
So like this, so root 1 is just 1 over 2, and then root 2 over 3, and then root 3 over 2.
That should actually be a
Okay, so that's one way to think of it. The cosine ones actually work
backwards, so what I mean by that is you're going to, instead of going up, you're going to go
down, so
this one is root 3 over 2,
this one is root 2 over 2, same for both of them, and then cos 60 is
1 over 2. So can you see that it's just kind of working backwards, right?
So in this one, the number on top goes up, and this one just goes down, so it's completely backwards.
That should make sense, because cosine is just a
transformed version of the sine graph, and then with tangent, I'll show you what those look like.
So if you bear with me two seconds.
Start with root 3 over 3. Also, there is another way you can work out the tan ones. If you remember that tan
is just equal to sine over cos.
So all we're going to be doing is taking the sine 30 value, so a half, and
dividing it by root 3 over 2, and that is also giving us our answer.
So you can also work it out kind of using the definition of tan, which is just sine divided by cos.
Then you have tan 45.
Now again, what we're doing is taking root 2 over 2 and dividing it by root 2 over 2.
So if you divide something by itself, it always gives you the answer of 1, and we can just keep going.
So hopefully that all makes sense. Again, you can work out these values
by hand, and this last one would just be root 3, because again, when you divide these two, they cancel, and then it flips to give you the correct answer.
The next bit is literally just about notation, okay? So generally speaking, if we have something like sine
x
equals 1 half, then to work out what x is, we need to do the inverse sine.
So when I write sine to the minus 1, or cos to the minus 1, or tan to the minus 1,
all it means is I'm doing the inverse function, and generally you're just going to be using it in order to work out
angles, right? So for example, if I want to get rid of the sine part here,
I take the inverse sine of both sides in order to work out what the angle is.
And that's just the same for sine, cos, and tan. So the opposite of sine x is inverse sine x.
Lastly is probably the trickiest part of this part of the trig spec. It's using these identities in order to
kind of basically rearrange equations like this, and also to find all of the solutions for simple trig
equations lying in specific intervals. This is using the cast diagram or the graphs, okay?
So I'm going to show you the cast diagram because it is far more
reliable, and it's a bit more mathematical. But again, if you do want to kind of remember rules or use the graphs,
that's totally fine as well. So this is how they look.
It'll be a part A where they want you to show that something can be written as something else, and
then a part B where they say, therefore solve it. So that's exactly what we are going to do in this case.
So when we have 1 plus
sine x,
now in my answer, I do not have a tan x, so I know I need to get rid of tan x. And tan x can be
written as sine over cos.
So we're going to have sine x
over cos x, and
that equals 5 cos x.
Okay.
The next thing I'm going to do is I'm going to times through everything by cos x to get rid of this fraction, because again,
in my answer, I don't have a fraction. So now I have cos x,
plus sine x times sine x is sine squared x,
equals 5 cos
squared x.
Okay.
Now in my answer, I don't have any sines, right?
Now one kind of trick to remember is that if you want to get rid of a sine,
you kind of have to use the sine squared plus cos squared equals 1
formula. So if we have sine squared x
plus cos squared x
equals 1, then sine squared x
equals 1 minus
cos squared x. Okay, so we can sub that in straight away, and cos squared is indeed in our answer,
so it kind of implies that we're doing something right. So now we have cos x
plus 1 minus cos squared x
equals 5 cos squared x. And now if I look at my answer, I can see that the cos squareds are positive,
so I'm going to move everything on the left hand side over to the right hand side, which is going to give me
5 cos squared x plus cos squared x, which is 6 cos squared x,
minus cos x
minus 1 equals
0.
Nice and easy.
Now for part b, it says hence solve. So the word hence in the exam,
I want you to replace that idea for a second, okay? Forget about the textbook definition of it.
Hence, for the purposes of maths or any other subjects you're doing
in terms of mathematical based ones,
is always going to mean
using the first part, so using part a or part one or whatever you want to call it.
Okay, so the word hence just means use this
to work out this. So without even writing
this again, I'm literally just going to write the answer to the previous part, which was 6 cos squared x
minus cos x
minus 1 equals 0. You don't even have to think,
okay? When it says hence, it just means using the previous part. That's all it ever means
in this regard.
And now we have
the fact, well, it's a quadratic equation, isn't it? So you can either solve this by factorization,
quadratic formula, whatever you want to do. I'm going to use the quadratic formula
just to make it
a bit easier for me.
And we're going to obviously get two solutions. So quadratic formula, let's go.
That's minus b. So in this case, that's minus of minus 1
plus b squared. So that's minus 1 squared.
And then that's minus 4ac. So minus 4,
6,
and minus 1
all over 2 times 6.
Okay.
So if that's equals, our first solution is a half. So let's put that over here.
And our second solution is
minus
a third.
Okay, so I've got two different solutions, and now I need to find all of the values in this region. So
keep in mind, when we did our cos x graph right at the beginning,
this goes on forever in both directions. It goes on infinitely.
Which means if I'm looking for cos x equals half,
there is an infinite number of values
where cos x equals a half.
So
we always need to use the
limits in order to give us certain values. So there are multiple answers in this region,
but we're limiting ourselves to this region itself,
inside which there's going to be multiple answers.
So now x is just going to equal the inverse cos of a half. Now, if you remember,
I'm in
degrees mode, so perfect, when I refreshed it was fine. But you need to make sure you check. So shift, mode,
angle unit, we're in degrees in this question. So inverse cos
of a half, so 0.5,
gives me 60 degrees.
Now I'm going to draw the cos diagram, and I'll go through what this means.
Now, don't worry too much, because we are going to get a ton of practice with this in this video.
So don't worry too much about it.
But when we have the cos x value, as you can see,
the actual ratio itself is positive, and the angle is positive, which means we're going to put this in the a section.
Now the a section just means
all.
Now this is where all three, so if you want to go through the cos diagram, c is cosine, s is sine,
t is tangent, a is all. Now what these represent are the regions in which our ratio is positive.
So for example, in the s region,
sine ratios are positive.
So if we had sine x equals plus a half, we would draw a line here, because the ratio is positive and sine is positive
in this region.
But since we have cos, we're going to draw our other one
over here,
and that's 60 degrees.
So as you can imagine, the a for all, it means that all of our answers are going to be put
into this region at first, if this thing is positive.
Now, how do we read these angles? Well, what we do is we actually do anti-clockwise
from
the horizontal line.
So in this case, this angle here is going to represent 360 minus 60, which is 300 degrees,
but you may notice that we're stopping at 180. So this is actually going to be
discarded at the end.
Okay,
so just as a reminder, this is going to be 0 and 360.
This is going to be 90 degrees.
This is going to be 180 degrees.
This is going to be 270 degrees.
Okay, so if I'm 60 degrees away from the 360 line, that means I must get 300.
Now I can keep going round, but the thing is I'm already outside my limit, so I'm not going to bother.
Now with the minus a third, this is where things get slightly more interesting.
So let's do cos inverse,
and I am aware that I could have just changed the values.
But you know, I get 109.5 degrees. I'm going to round it up.
Now the angle is positive, but if you notice the actual ratio itself is negative.
So since it's negative, I'm going to be looking in the regions where cosine is negative, which is in the tangent region
and the sine region. And again, I'm going to write my angle. So 109.5
and 109.5.
Then all I'm going to do
is do...
So if I want to work out this angle here for sine, again, what I'm actually working out is this angle. That's 180
minus 109.5. So 180
minus 109.5
is an angle of 70.5 degrees.
And the next angle to work out
this part
is I'm going to do 180
plus 109.5. I already know that it's going to be outside my range. So if you didn't include it, that's completely fine.
But I'm just going to do it for demonstration purposes. 188. Whoops.
180 plus
109.5. There we are.
289.5 degrees.
Which I know is too big for our range. So our actual final answer
is going to be
60. I like to put them in kind of
size order, but it's not necessary.
109.5 degrees. So with this question,
since it's a quadratic, keep in mind you are going to get two sets of values. You're going to use two cast diagrams.
Or again, if you use the graphs, you're going to have two of those as well. So just keep that in mind.
We now need to prove the identity sine theta plus cos theta is equal to one.
Sorry, open bracket one minus sine theta cos theta is equivalent to sine cubed theta plus cos cubed theta.
Let's get to it. Well, we have brackets. There's no brackets in the answer. So let's expand them. So we have sine theta
minus sine squared theta
cos theta
plus cos theta
minus sine theta
cos squared theta.
Okay, so now here might be the kind of tricky part that you're not too sure about what you're going to do.
Well, what I'd look at is in my answer, I have sine cubed theta and cos cubed theta.
So I know that this cos theta and this sine theta disappears.
And these weird kind of conjoined
terms here, the sine coses, they're going to go away. So how can I make that happen?
Well, I can get rid of the cos squared and make it sine squared. And sine squared times sine
will give me sine cubed. And likewise here, I can get rid of the sine squared, make it cos squared,
and that will give me cos cubed. So the way I do that is I use once again
the fact that sine squared plus cos squared
equals one,
which means that sine squared theta
is equal to one minus cos squared theta.
And
cos squared theta
equals one minus sine squared theta.
And that will give me the answer I'm looking for, I'm hoping. So we have sine theta minus
one minus cos squared theta
cos theta
plus cos theta
minus sine theta
one minus sine squared theta.
And then from here, what we can start doing is expanding the brackets and simplifying.
So we have sine theta
and then that becomes a minus one.
And then that becomes minus cos squared theta times cos theta is minus cos cubed,
but then we have another minus, that's plus cos cubed theta.
Plus cos theta,
that here should be minus
cos theta
minus sine theta
plus sine
cubed theta. So get rid of these sines because they cancel out, get rid of the cos's they cancel out, and we are indeed left with
sine cubed theta
plus cos cubed theta. So that is
100% correct.
Now in the next part, it's going to probably say hence solve the equation.
And it says solve it and it has three cos cubed theta. So again, I'm not even going to bother
writing out the same thing again. We're going to have sine cubed theta plus cos cubed theta
equals three
cos cubed theta.
Move the cos cubed over to the other side, so we have sine cubed theta
equals
two cos cubed theta.
Now here's the interesting part. If you remember, sine
x over cos x
equals tan x.
So if I divide the cos cubed to the other side, I'm going to get sine cubed theta
over cos cubed theta,
which actually equals tan
cubed theta.
So that kind of solves my issue for me. That gives me tan cubed theta
equals two. So tan theta
equals the
cube root of two. And that means I can start doing the class diagram.
Not too bad, right? So theta equals the inverse tan of cube root of two.
So inverse tan
cube root of two.
51.6 degrees, let's call it. And again, we're going between zero and 360.
Again, the first angle is always in the
all section.
So our next angle, which is here, is going to be 180
plus 51.6.
So
again, I am being a bit lazy using calculator, but this is a calculator question, so
it's all good. 231.6.
And
again, I could go around again to find more solutions, but they're going to be outside my range, so why bother?
So that is the correct answer. Again, it's a three marker,
and it really didn't take me that long. So that is extremely, extremely useful.
Now this one is a lot of fun. So proving this identity. So what we're going to do is have a look.
So we have one plus cos theta over sine theta,
and we have sine theta over one plus cos theta.
It's equivalent to two over sine theta. So again, when we have this equivalent sign,
we're not actually making them equal to each other. We're going to show that we can write this in this form,
which is why in all my previous questions, I haven't
kind of written, oh, this equals two over sine theta, and then I tried to like cross cancel or anything.
That's not what we're trying to do. We're just trying to rewrite something. We're not trying to cross cancel or solve or anything like that.
Well, we are, but in part two anyway. So let's get started. So we have this weird kind of setup.
So we can try and combine the fractions or we can get rid of the fractions and either one is completely fine.
If we want to combine the fractions, we'll need to times this one top and bottom by one plus cos theta.
And we need to times this one top and bottom
by sine theta in order to make the denominators the same.
So if I do that, we have one plus cos theta
times one plus cos theta.
And then if we do the same for the other side and combine the fractions in one fell swoop,
we have sine squared theta, and that's all over the new combined denominator. I'm sorry for my handwriting,
of sine theta
one plus cos theta.
Okay.
And we need to prove that this is equal to two over sine theta.
So what we're going to do is we're going to expand all of the brackets that we have. So we have one,
right?
Plus and that'd be two cos theta because we have cos theta times one plus cos theta times one
plus cos squared theta
plus sine theta.
And on the bottom we have sine theta
plus sine theta
cosine theta.
So what we can look at here is we definitely have
sine squared plus cos squared, so we know that equals one, right? So we have one
plus
two cos theta
plus one.
So again, we can use equal signs here.
It's just not on the other side, we can't really use them.
And I'm going to factorise out
a
sine theta. So let's factorise out sine theta
one plus
and I am aware that that is exactly the same as what we had before,
but we couldn't have known until we got through the question that might be useful.
So here we have two plus two cos theta
over
sine theta.
And hopefully now you're seeing why I did this.
Because if I factorise out a two,
because again, if I look on top, I knew I had a two left over.
I have one plus cos theta on top, and I also have a one plus cos theta on the bottom,
which means I can do a fancy little cancelling.
Cancel, cancel, and I'm left with
as shown above
or as asked for above, that this is all equal to two over sine theta.
So hence solve the equation that all of this nonsense is equal to three over cos theta and solve it.
So all we're going to do here is
I'm going to sub in what we got before, which is two over sine theta.
Now generally speaking, when you have these equations and you have a sine theta and a cos theta, and they're not squared or anything,
you're going to want to try and get sine over cos. So if I times both sides by sine, I get two equals
three sine theta
over cos theta.
I'm going to divide both sides by three. So now I have two thirds
and sine over cos is just
tan theta. Okay, so nice and easy.
Next thing we're going to do is just do inverse tan of both sides, and that will give us the
value we're going to use for our answer. So we have inverse tan, and that is in degrees mode, yep,
two thirds.
33.7 degrees.
Once again, we head over to the trusty cast diagram.
C
A
S
T.
It's in the or section and in the tangent section.
This is 33.7.
This is also 33.7.
So we're going to work out that angle, which is 180 plus 33.7. So 180...
Dang it, my number was on. 180 plus 33.7
gives an answer of
213.7,
which is
the final
answer.
So that covers like the first half or the first part of trigonometry that you can expect
in your papers, as we've gone through a few of the questions.
But keep in mind that the next video is also the kind of further trigonometry that you're going to have to know.
But for now, I will leave you to it.
Thank you.