I always want to hear your feedback so drop a comment down below ✅
🚨 Struggling with the toughest questions from the June 2024 GCSE Maths Paper 3 (Edexcel)? You’re not alone – and you’ve come to the right place.
In this video, an experienced maths teacher breaks down and explains step-by-step solutions to the hardest questions from the Edexcel GCSE Maths Paper 3 (Higher Tier) – sat in June 2024. Whether you're revising for Paper 3 or reviewing what went wrong, this walkthrough is designed to help you improve your understanding, boost your confidence, and maximise marks.
📘 What You’ll Learn:
Detailed solutions to the most challenging exam questions
Top tips for exam technique and avoiding common mistakes
How to tackle tricky problem-solving and reasoning questions
Strategies to prepare for Paper 3 and future exams
🎯 Perfect for:
GCSE Maths students (Higher Tier)
Year 11s preparing for Edexcel Paper 3
Anyone wanting to learn from past paper questions
👍 Don’t forget to Like, Subscribe, and Turn on Notifications so you don’t miss more walkthroughs and exam tips!
Hey guys, welcome back to one of these
videos where I go through the 2024
papers or just past papers in general
and I go through the hardest questions
on that paper to help, you know, boost
you from a grade maybe five or six all
the way up to a grade seven, eight or
nine because again these last few
questions are the ones that people
sometimes just get zero out of four,
five or six on and that's a big shame.
So I'm going to show you how you can
actually get a couple of those marks at
least to help push you to the next grade
or to as high as grade as possible. Now,
I picked the last three questions from
this paper because honestly, this paper
was kind of light, but paper one and two
were kind of crazy. So, kind of makes
sense. Now, that doesn't mean you should
skip this because the last question was
juicy. It was a crazy question. And I do
think everyone should at least have a
look at it because whilst it is very
different to questions that we've had
previously, it also has some
similarities because once again, and if
you've watched a lot of my videos, you
know that I always say that the hard
hard questions they put at the end
always have something to do with a
circle. And this is no different. It's
still a circleish kind of question. We
have to find the value of pi between two
limits, which is very interesting. So
again, without further ado, let's just
jump straight into the first question.
So this is the third to last question on
this paper. Again, I don't think this is
too crazy, but bounds is a grade seven
or eight topic. So there's some people
in here that might not know exactly what
to do. So here it gives us P correct to
3SF, Q correct to 2SF. Work out the
lower bound for R. Now, here's something
I want to make 100%
clear. Just writing the bounds or at
least one correct bound gets you one of
the three marks straight away. So even
if you have no idea what the hell
they're talking about, if you just write
the biggest or smallest value for P or
the biggest or smallest value for Q, you
get a mark straight away without any
questions asked. So that's why in my
opinion, the best thing to do here is
you get your two values and you just
write the upper and lower bound because
you can get one. I've even seen
sometimes you get two marks for this,
but one is guaranteed. Now, if it's to
3SF, that means we look at the third
number. We're going to add point. We're
going to add five after the number. So
here it's going to be
5.885 and then we're going to just minus
one kind of one from that number if that
makes sense. So
5.875. So again all that changes with
sigfig is you take the number you plonk
a five on the end and then you just
minus one. So 0.01 in this case. And you
get your other value. There you go. One
mark done. Even though I have no idea
what I'm doing in the question yet. Do
the same thing with 3.6. So here we have
the higher or the upper and lower bounds
for both numbers. Again, just plunk a
five on the end. 3.65 * 10 5 then minus
a one from it. So here it's
3.55. Not bad, right? So working out the
lower bound for R. R is P divided by Q.
So what they're basically asking you is
how do I make R as small as possible?
Now, if I think about it, and I like to
use really easy fractions to to make it
clear, right? If I have 1 over
two and 1 over 3, 1 over 4, 1 over 5. As
I make the denominator bigger, what
happens to the overall value? Well, it
gets smaller, right? Like 1/2 is 0.5,
1/3 is 0.33, 1/4 is 0.25, and so on. So
in other words, if I want to make it as
small as possible, I want to make Q as
big as humanly possible because as I
make a denominator bigger, the overall
value gets smaller. Now let's do the
same thing with the numerator. What
happens if I make just just the
numerator
bigger? Well, this one might be a bit
more obvious. As I make the numerator
bigger, the value is getting bigger. So
if I want to make r as small as
possible, I want p to be as small as
humanly possible because I want a
smaller number divided by a bigger
number. So if I take the lower bound of
p, which is 5.875
* 10 ^ 8, I'm going to divide it by the
biggest value of q which is 3.65 * 10
5. And it says giving it as an ordinary
number correct to the nearest integer.
Yeah. Okay. Wonderful. So let's just
shove this over
here. 5.875
* 10 ^ of 8 over
3.65. Yep. Time 10 to the power of 5
gives me to the nearest integer. That's
1610. There you go. That's it. That's
the correct answer. So again, not too
bad. So where'd you get the marks? One
mark for writing any of the bounds. So
it doesn't matter any one of these four
numbers gets you a mark. Second mark is
for choosing the correct bounds. So
choosing the upper bound for the
denominator, the lower bound for the
numerator. The third mark is for getting
the right answer. Of course, that's it.
This question I thought was uh fairly
interesting. So we have a part A and a
part B. It has a bunch of algebra and it
says x - 4, x + 2 and 3 x + 1 are
consecutive terms in an arithmetic
sequence. Okay, so what does that mean?
Well, if we think about it, it means
that the between these terms, we add a
certain number, right? So in other
words, x -
4 x - 4 +
something since it's different, should I
say plus d
= x + 2. And we also have that x + 2
plus d
= 3x + 1, right? Because they're
consecutive terms of an arithmetic
series. I can also say that x - 4 + 2d
gives me 3x + 1. All of these equations
would be a correct first step. So what
could we do then? Well, I would just
make this a simultaneous equation,
right? So I might not use this one. I
think I'll just use the the first two
that I wrote. By the way, there are
other ways to do this. Just pointing
that out. For number one, I'm going to
move everything, all of the letters to
the left side, all of the numbers to the
right side. So, if I minus x from both
sides, I'll get zero. And I can add four
to both sides, which means I get d is
equal to 6. Right? If I minus x and add
four. Okay, never mind. Then I can sub
that straight into here. I get x + 2 + 6
= 3x + 1.
So that's x + 8 = 3x +
1. I'm going to minus x from both sides.
So I get 8 = 2x + 1 - 1 from both sides.
I get 7 = 2x. Which means x is equal to
7 / 2 or 3.5. That wasn't too bad
actually. So I didn't even need to move
everything over. We could just solve
that straight away. Very nice. Now for
part B, it's a very similar question,
but this time it's a geometric sequence.
A geometric sequence means that they
multiply by something in order to get
the next term. So for example, we could
have 2 4 8 16 where each term is being
multiplied by
2. Now again, there are two ways to do
this. I could say y - 4 * d = y + 2. Or,
and I actually prefer this way, if I
didn't know that I was tsing by two in
each case, what could I do? Well, I
could divide any two of the terms, any
two consecutive terms, and I'll get two,
right? So, why don't I do the same thing
here? Y + 2 over Y -
4 should equal 3 Y +
1 over Y + 2.
Then I'm going to cross multiply.
So I get y +
2 y + 2
= 3 y +
1 y - 4. So that is y^ 2 + 4 y + 4 = 3
y^ 2 - 12 y + y. So that's - 11
y and
-4. Then move everything to the right
hand side. So we get 0 = 2 y^ 2 - 15 y -
8. Now from here you can factoriize, you
can use quadratic formula, you can use
completing square, whatever you want.
Five marks. Oh my god, I didn't realize.
Um, but anything you need to to to solve
it. So I'll show you the factorizing
just in case you guys prefer that
method. But again any method you have of
solving quadratics. So times the -6 add
to - 15 would be -6 and
1 y
y. Cut it in
half. We get 2
y - 8. Then that would be + one y - 8.
So we get 2 y + 1 y - 8. So our two
values are either y is equal
to0.5 or a half, whatever you want to
call it, or it's equal to eight. There
you go. For five marks, that's actually
a really nice question. However, there
was a question like this the year before
which had which was in non-calculated
paper and it had SS and things like
that. So you know, it can get a little
bit trickier. But let's move on to the
question that is kind of
crazy. Here it is. Here it is. It looks
very complicated, but you know what the
the thing is? The actual math isn't bad.
Let's have a look at it. So, as you can
see, we have a
hexagon inside of a circle, which is
inside of a bigger hexagon. And
okay, and okay, it tells us some stuff
about tangents and and all that. It is
relevant, but not right. Now, the key
thing is it says by considering
perimeters. So that gives us a really
big hint. We need to show that 3 is less
than pi which is less than
23. Okay. So what would I do in
this question? If I'm being completely
honest with you, uh so obviously I had a
go at it before I did the video because
I don't want to get it wrong. Um I had
no idea what to do at the start. So I
just followed the instructions by
considering perimeters. So I was like,
okay, I'm going to try and find out the
perimeter of the small hexagon, the
perimeter of the circle, and the
perimeter of the big hexagon. And then
it it dawned on me, right? We have this
inequality. What do I know about the
perimeters of these three shapes? Well,
the perimeter of the small hexagon. So,
the perimeter of the PQ blah blah blah
is less than the perimeter of the circle
is less than the perimeter of the AB
hexagon, right? Because they're inside
each other. So, you got the smallest
circle
hexagon. Now, I know exactly what to do.
We're going to find expressions for the
perimeter of the small hexagon, the big
hexagon, and the circle. And we know
that the circle is bigger than the small
hexagon, and the big hexagon is bigger
than both of them. So, let's get
started. Well, I think the easiest one
is to do the circle. How do we work out
the perimeter of a circle? That is just
the good
oldfashioned circumference. It's 2 pi r.
There you go. First one done. Now, we
have to work out the perimeters of these
shapes. Now, how do I do that? Well,
logically, because they're regular,
they're just going to be six times one
of their lengths. So, for example, if I
work out the length P to Q, six times
that is the perimeter of of the hexagon
PQR
STU. Okay. So, what can I do now? If you
remember, and again, this is the first
thing I did. It was almost like a a
reflex reaction,
right? I know for a
fact that you can break up circles
into different shapes. Now, why did I do
that? I did that because both of these
lengths are the radius of the
circle, right? Logically, so again, you
do this in every single circle question
that they ever give on the last question
is you break it up. Now, why have I done
that? Well, now we have two
radi. The interesting thing is, and I'm
going to remove these other lines, is if
I keep doing this around the whole
thing, what do I
get? I get six equilateral
triangles. Yep. As in, all of these
triangles are the exact same. They're
identical. I shouldn't have said
equilateral. I should have said
isoclesles, but they're all the exact
same. So, in other
words, all I'll need to do is if I work
out the length of this side and times it
by six, I get the perimeter of the
circle of the hexagon. Sorry. Okay, how
can I do that? Well, that's a little
trickier. Um, I know that this is going
to be
60° for for a fact because again, if I
can divide it into six equal pieces, the
angles around a point add up to 360,
don't they? So that means so again if I
go back to when I had all of these
points on
here because all of these uh triangles
are identical all of these angles are
identical. How many angles are there?
There's six angles. Angles around a
point up to 360. 360 divided by six
gives me the 60° for this one. Cool. So
now I can get rid of that. Being really
careful not to rub anything else out.
But that is the first thing that we're
going to do. Now I can use the cosine
rule here to work out that opposite
length, right? I can use a^2= b² + c²
blah blah blah. However, to make it a
little bit easier, what I can do is
because I
know this would be 90°, right? Because a
radius meets a chord at 90°. In fact,
I've kind of spoiled the next part of
this question now. But if I draw it just
going up to here, that's 90° and that
here will be
30°. So now if I draw this triangle out
here, just to make it a bit
clearer. We have a 90° angle. We have a
radius. We have 30°. I want to work out
this side. So if I label everything up,
we have hypotenuse, opposite, adjacent.
So we have opposite and hypotenuse.
We're going to use sign. So we have sin
30 equals opposite the side we care
about over r. So the opposite side is r
sin 30. So that side there is r sin 30.
Cool. That means the total length
pq is equal to 2 r sin
30. Which means the perimeter of pq
Okay. No, we should probably write the
whole thing, right? P QR STU P Q R S TU
is equal to 6 * 2 R sin
30, which is 12 s 12 R sin 30, but if
you remember sin 30 is a half. This is a
calculator paper, so if you weren't sure
about that, just whip out your
calculator. S Whoa,
careful is a half. So that means it's
6R. Now if you
notice, do we do this now or should I do
it
later? Okay, I can work out the the
lower value for pi. Actually, no. No,
we'll do it later. Now, we need to do
the same thing for the bigger hexagon.
So what I'm going to do is I'm going to
once again I'm going to just erase
everything that we've just done.
However, I'm going to do something very
very similar because what other
information have they given me? They've
said that each of the sides are tangents
to the circle. So, if I draw
a line from here to
here, that there is the not the radius,
sorry, but that is at 90°.
So if I make a right angle
triangle like that where that's R, then
I can work out the length
of this side. In fact, let's change
that. That's going to be R, right?
Because it goes from the center to the
edge. And we're going to try and work
out this adjacent side here. So once
again, I'll draw out the triangle down
here just to make it a bit clearer.
Actually, I'll draw it over here. We
have a triangle. That looks okay. That's
a bit too terrible for
me. Not
bad. We want this side here. We have the
radius because again it goes from the
center to the edge of the circle. This
isn't the radius. I I drew it initially
going up to Q which is the radius, but
we want we're going to draw it as the
whole line to make it an actual right
angle triangle. So here we have that's
the
hypotenuse that there is still 30° just
like it was before. That's opposite and
that's uh adjacent. So we have opposite
and adjacent. So we have tan
30 equals opposite over r which is the
opposite side is r tan 30. And once
again that's only half the length a to
of a to b. That means a to b is equal
to 2 r tan
30. Which means the perimeter of a b cde
ef is 6 * 2
r tan 30. So in other words 12 r tan 30
and if you remember tan 30 is
33 uh sorry roo3 over 3. So if
we do 12 times that
whoops we get
43r 3r. So now we have our
three perimeters
right and what did I say
initially the smaller perimeter is less
than the circle which is less than the
bigger one. So we can write this as a
big inequality. We have 6
r is less than 2 pi
r is less than
43r. Now if you have a look at the
answer let's check out what's different.
Well, the first thing is they've divided
r
away. Then they've just divided the
whole thing by two, right? So if I
divide by two, we got our final answer,
which is 3 is less than pi is less than
23. Just like that. Four marks is a
bit crazy, not going to lie. Um, but to
be fair, it's not super long. It's just
very difficult to spot. Um but again
hopefully you can see how I use the
question to get the answer or at least
get a couple of marks. So you do get
marks for things like this. You get a
mark for the r sin 30 and a mark for the
r tan 30. You then get a mark for having
a correct inequality and then a mark for
simplifying. So honestly just getting
the two sides might be a benefit. But
hopefully that was useful to you. If you
did find it useful again please do
consider subscribing. It really does
help me out. But I'll leave you to your
revision. Good luck and I'll see you in
the next