I Made the American Duchess 1910 Wrap Cape

Edwardian Threads
5 followers
21 Video Views·Oct 29, 2025
In this video, I recreate the elegant 1910 wrap cape from American Duchess, blending Edwardian fashion with modern cottagecore and historybounding style. Watch the process from fabric selection to final stitches—then skip to 2:06 to dive into the project and 17:38 for the grand reveal.
Greetings everybody and welcome back to my channel. How are you doing today? I
hope you're doing well. I know that fall has been hitting each and every one of
us differently so I hope you're persisting to have a great time. So I
really wasn't feeling myself well enough to speak to the camera while filming
this project which, by the way, took about 68 of my past freaking years. So this
week's video is gonna be heavily voice-overed. I feel like I should be
apologizing because I feel like I'm not... like I'm not giving you the best kind of
content that I could give you. Like I'm not giving the best of myself. But anyway
this probably doesn't even matter that much and I'm actually super excited to
show you this week's project. Oh! If you're new here, hi! My name is Sarah Labarre
and on Fridays I like to sit down and show you a craft that I've been working
on. This has mostly become a sewing channel over the months but over the
summer I did some gardening. You can expect to see some painting and all
sorts of other arts and crafts. So if you are a crafty person and you're looking for
crafty content on the internet, well you can subscribe to this channel because we
are here on Fridays. I'm wearing my 1905 Edwardian-ish
underscore dress right now because I'm actually getting ready to go outside and
film the reveal for today's video. This project wouldn't have been possible
without the expertise at American Duchess whom I will link in the
description box down below. Last year they generously made available a free
19-teens wrap cape pattern on their blog which has since, I think, become the most
viral cape pattern in my somewhat niche corner of the internet. It is based on
this original 1910 garment and looks very much similar, here worn by the
lovely Nicole Rudolph. You can also search for the hashtag ADCAPECULT on
Instagram to see hundreds of different versions of this beautiful garment. I'm
about a year late for this party but it's never too late to make an entrance.
For this project I begun by tracing and then working a few alterations into the
pattern. My first and easiest one was to elongate the back panel by a foot or 12
inches and to stretch the side piece accordingly so that the back is a foot
longer while the front remained just the same. I then made my first mock-up to get
a good idea of the fit before I attempted any alterations to the pattern.
So I tried the mock-up on and I found out that the shoulders, back, sides and
everything are just fine except for the wrap pieces which needed, in my opinion,
some serious adjustment. Which makes sense because not all bodies are the
same. I put the cape on my dress form and using some pins I worked with the three
darts to mold this piece closer to my own body shape. My next alteration was to
add a lapel right under the base of the collar. Using some tape I tried out
different shapes until I had a basic one that I liked. I sewed an extension to the
edge of the wrap piece directly on the form and I kind of draped it so it would
assume a similar shape to the collars. There I could sharpie an approximative
shape, cut it out, pin it in place and trim it until satisfied. While the mock-up
was still on the dress form I took a sharpie to mark all the new seam lines
because it was now time to rip the whole mock-up apart to trace the new wrap
pattern down onto paper. Sides and the back needed no alterations so good for
me I guess. Every time I made a new adjustment to my pattern I traced it
back onto paper with the tracing wheel, straightened my lines and traced them
again with the sharpie for a really precise pattern. I did that with my
second, third and fourth mock-ups. I started with this original pattern piece
here, again thank you very much to American Duchess, chef's kiss, and after
four mock-ups I ended up with this totally different pattern piece here.
I've added a lapel, I've widened those darts and I've added a little darted
extension down to the side to try to cover up a little bit more of the chest.
In addition I've made this little front shoulder slash chest pad, I don't know
what's that piece's exact tailoring name but anyway you can see this piece inside
the front of bespoke tailored jackets. It's meant to be layered with the inner
lining with some pad stitching in order for the shoulder area to have more heft
and structure. The footage you're seeing right now is not something that can help
you learn about authentic tailoring techniques. As a matter of fact my
techniques could only be described as bootleg. My stitching is far from being
neat enough, symmetrical enough or invisible enough to qualify in a real
professional tailoring shop. Moreover a professional tailor or a tailoress would
use far better materials for the inner linings. A bespoke suit is interlined
with canvases of different weight and heft, in particular horsehair canvas with
or without actual horse hair in it. I did not have access to this high-quality
product at the moment and I was trying to go with what I already had anyway, so I
went with this cotton and linen canvas. For tailoring it was a bit too much on
the floppy side so I decided to pad stitch two layers of inner lining
together in order to treat them as one. I basted my two inner lining layers
together at the line where the lapel is expected to turn and then I pad stitched
the two lapel layers together. I've traced lines along the grain line with a
pencil a quarter inch from each other at the base of the lapel and then more like
at an eighth of an inch from each other towards the tip of the lapel. I started
my first row of pad stitching along the lapel fold, holding the fabric in the
exact shape I wanted it to retain. I sewed the layers together in this sharp
fold. You can see when I get at the top here that I am still giving it that fold
but I'm rolling it around my finger instead to give it more ampleness. I made
sure to hold it taut so that the lapel stayed curved towards the chest, doing
row after row after row of single stitches up and down the lapel. When the
lines narrowed down at an eighth of an inch from each other I kept going. It
made my stitching denser and it gave that tip extra heft and stiffness. The
canvas piece needed to be added to the shoulder slash chest area just like in a
bespoke suit. I've marked my parallel lines at a quarter inch from each other
before I sewed in my dart and secured its raw edges with a bit of tape. I pad
stitched this piece to my interlining along the lines using my tailor's ham
and whatever I had in hand to make the garment assume its correct shape. To hide
those raw edges I went over them with the cotton tape but I did them by hand
just to have better control over those curves. I did a cross stitch to quickly
catch both sides at the same time. For some reason I took no footage of the pad
stitching process on this collar piece. This is actually the interfacing for the
under collar. On a tailored jacket the under collar would not be caught on the
fold but actually on the bias and sewed together at the center back. I did two
layers which I've pad stitched following the grainline in diagonal rows stemming
from the center back. For the collar stand, that's the bit that goes around
the neckline, I did my rows of pad stitching more or less parallel to the
bottom edge while rolling the fabric so that it curved in the right direction
around the neck. You'll see me work on this bit again further on so hopefully
you'll understand more then. But for then I was done with the interfacing and I
was finally ready to start cutting into the real fabric. For the main fabric I
chose this lovely wool plaid suiting on the right with accents of baby blue,
white, green, ochre and brown. I chose to make the main lining out of that ochre
cotton flannel on the left. You may recognize this fabric from my previous
cottagecore dress. If not you may check out the video tutorial for it in the
description box down below. Some stripes in the plaid are almost this exact same
color so it's a really good fit. Finally for the wrap piece lining as well as
some decorative accents I used a bit of this green quilting cotton which isn't
like a hundred percent match with the green in the plaid but it does a damn
good job at complementing it. I basted the darts by hand and then sewed them by
machine. I trimmed the darts, pressed them to one side and went on to covering
those raw edges with the cotton tape. I couldn't however do this by machine with
a quick zigzag like I had done with the interfacing. I had to do this by hand
securing both sides at the same time with a cross stitch making sure that my
needle catched only one single thread every time so that the stitches won't
show on the right sides of the fabric. Once both my outer layers were prepared
and pressed I basted them onto the interfacing at the shoulder and around
most edges and most importantly at the line where the lapel was expected to
fold. I repeated the pad stitching process very much the same way I had
done with the two interfacing layers following these same lines and doing the
same stitches. My stitching is approximative at best. A professional
tailor would be able to pad stitch a whole lapel without a single stitch
being visible on the underside. Mine are very much visible but it's not a big
deal for me because we rarely look at the back of lapels so don't at me. I then
trimmed all the superfluous seam allowances around the interfacing and
then I folded the wall over to hide all the raw edges basting all of this in
place with again very approximative basting stitches and I did the same
process on the lapels too. I ended up with two tailored wrapped pieces like
these. Here's what they looked like pinned to the dress form. Is it just me
or did they already look very promising? So the original pattern from American
Duchess does not feature this but I've added a bit of interfacing at the upper
back. I basted it around the shoulders neck and sides and then I cross-stitched
another cotton tape at the bottom of this piece being extra careful to pick
up like one single thread every time I stitched so that none of it would show
through on the back of the garment. With the back panel all prepared I attached
the shoulder seams. It may have been slightly overkill but I covered those
raw seam allowances with a strip of canvas. After that I sewed in the side
panels starting from the bottom up and letting the front part hang down. I used
some ribbon to tuck most of the raw edges towards the body. I don't know why
I didn't tuck that leftover seam allowance there but it doesn't really
bother me. It's kind of random but you know the Edwardians weren't particularly
fussy when it came to not finishing their seam allowances so again don't at
me. The main idea there was to hold the bulk of the structuring material in a
smooth crisp fold instead of letting it pucker and mess up my whole shoulder.
I went on to preparing my collar. Aside from the interfacings, three collar pieces
were cut in the wool. Two collar halves were cut on the bias for the under collar
and one collar piece was cut along the fold. I sewed the bias ones at the center
back, gave the whole thing a good press and then basted it under the interfacing
at the crease line. Under that line is the collar stand while the actual collar
is over the line. Holding the whole under collar folded in the appropriate shape I
did my pad stitching rows starting from the top center back going up and down
with my stitches until I reached the bottom of the center back and then went
at it the other way down to the tips. I followed the same lines I had sketched
out on the interfacing then I stretched and I rolled the material to make it
want to keep that shape when it has been stitched through. Again my pad stitching
is probably far too sloppy for the real tailors and tailoresses and tail folk
out there and I can live with that. The collar stand or should I say the under
collar stand is pad stitched horizontally and that's where the
stitching got the messiest but you know what? In the end it worked! I just used my
tailor's ham and my hands to suggest a curve and sewed. Next I had to prepare an
accent piece for the collar. This was an original feature and I loved it so I
changed nothing about it. I used that little green quilting cotton, I basted
that accent piece in place in the middle of the collar and then hand sewed it
there with some small slip stitches. With the two main collar components
complete I could then sew them together right sides facing each other. I flipped
the collar right side out and gave it a good press. I also pressed the inner side
inwards while leaving the under collar flat. I left the collar aside for now and
went on to make the lining. For the wrap slash lapel lining I decided to
replicate the collar accent on the lapel. I used the same fabric as the collar
accent for the wrap lining and I did it just the same as the wool one except I
made my lapel slightly smaller. I basted all the edges and cut the whole lapel
section in the wool fabric. I basted it then hand sewed the cotton lining
against the wool lapel to make one accented piece. These pieces are then
attached to the back at the shoulder seams and the sides were added. These
were made out of the ochre flannel which layered with the wool is gonna be like
super warm. I basted all my seam allowances toward the wrong side of the
fabric in order to get neat edges that I could pin, baste and sew directly to
those of the main garment. Sandwiching those layers together essentially hid
all the raw edges in between and ensured a durable garment. I made sure that all
the side seams were lining up then I trimmed the lining hem a bit shorter
than the outer garment. The wool hem was turned twice, pinned and then hand
stitched in place. And then I gave it a good press to smooth out all the uneven
curved bits. The second to last thing to do is to attach the collar. Doing that
was pretty straightforward. I sewed the under collar to the outside of the
garment, right sides facing each other. The previously pressed seam allowance on
the other side should normally have been able to reach a neckline without
puckering. But the thing is, tailoring makes it so that the upper collar needs
to be larger than the under collar because it has to roll around it, so it
needs more ampleness. And I didn't plan for this in my pattern. So I bridged that
gap by hand sewing a piece of ribbon in there. I even added a ribbon loop at the
center back to be able to suspend the cape to a close hook. And then finally
came the last step, which was to remove all the basting stitches that I had made
to hold a garment together while it was sewn. There were temporary stitches all
over the place, so it took a while. But they all came out and after one last
good press, the cape was complete. In conclusion, that took a heck of a long
time. So many mock-ups. Like I started sewing in late August and I honestly
thought I was gonna be able to publish a sewing tutorial for Cape Tember, which
happens in September. My sweet summer child. Yes. And here we are in early mid-November
ready to finally shoot a reveal, like a month and a half later than I thought.
Let me just tell you, I was pretty fed up by the end. But the results totally make
up for it though, because look at this beautiful garment! I'm gonna sound like
a total cliché, but it is like the favorite garment I've ever made. Which
kind of makes sense, because every time I sew, I keep getting better at it. So you
know, each make should technically be better than the previous one. This time I
got better at it all thanks to some of Bernadette Banner's videos about
tailoring and sewing, which I'm gonna put a few links to in the description box
down below. Thank you very much Bernadette and all the content creators
you work with to provide the information that you did, because I honestly wouldn't
have done it without you. Also, this video would not have been possible without the
free pattern at American Duchess, so from the bottom of my heart, thank you very
very much. I do hope I'll get to buy some of your shoes someday, because your merch
is the ----. And who else? Oh yes, thank you to all of the content creators who have
inspired me to join the ADK cults with their beautiful makes on Instagram and
Facebook and other social media, and also by providing a wealth of information for
all the sell-top sewists out there like me. And finally, thank you for watching.
Have you yourself joined the ADK cult? Or even, did you do something for Cape
Timber? If you did, I'd very much like to know about it, show me your makes, I'd
very much like to see them. And without further ado, let's pop this baby on and go shoot a
reveal.
