Obscure Weapons from History: Dayak Mandau HEAD HUNTER Sword

Ancient Edge
3 followers
3 Video Views·Oct 7, 2025
Next up in my Obscure Weapons series - the Dayak mandau sword, from Borneo. The weapon of the 'head hunters'.
Hi folks, I'm Matt Easton of Scholar Gladiator and also of Eastern Antique Arms, so I deal in
antique weapons and therefore I come into contact with a lot of obscure weapons and this is part of
my obscure weapons playlist. So today we're going to be looking at a specific type of knife or
short sword you could call it, which is associated with the Dayak people of Borneo. Borneo that is
partially Malaysia, Indonesia and Brunei. So the island of Borneo is fascinating for
all sorts of reasons to do with its wildlife, its history, but the Dayak people are perhaps
most famous as so-called head hunters. Now if you've never heard of the head hunters of Borneo
then they are, were, essentially what it sounds like. They hunted heads, that was they were fairly
warlike sets of people who were often in inter-tribal conflicts with each other, very interesting types
of conflict as well. They had a variety of weapons, they fought both on water and on land,
in the jungle and in some open spaces as well, but they were essentially very warlike tribes who
were constantly in conflict with each other and one of the things that they did during these
conflicts was gather the heads of their opponents. They literally decapitated their opponents
and kept those heads essentially as trophies and this is kind of what they were famous for in the
19th century and referred to as the head hunters of Borneo. In fact this practice of head hunting
was kind of clamped down on by various colonial powers, so it's not something that has continued
to the modern day of course, but the weapons that they use are, some of them are more ritualistic
and some of them are more practical. Obviously for the most part a lot of their primary weapons were
things like spears and shields, but they did have certain types of sword and one of the most famous
of these is the mandau. So here I have an original antique mandau, now I'm going to refer to this as
a mandau throughout this video, but in fact it does go by a variety of other names in other
languages and dialects as well, so there were similar swords to this in different areas,
were known by different things and also these themselves do vary quite a bit. I actually have
two examples here so I'm going to show both of them and they vary slightly in shape and design,
they vary slightly in the materials that they're made of and the way that they're decorated and
what they were used for. So we actually have a spectrum of use for these. Now I'll just
unsheathe this before I go on so you'll get an idea of the sort of blade that we're talking about.
Now I'm going to put the scabbard down for a second simply so I've got a hand free. This is
the sharp edge and it is pretty sharp I have to point out, but we'll talk more about the design
of it here. There are some variations in the blades but you will notice the characteristic
feature of these mandau are that they have no real guard to speak of, they have a hilt if you
but anyway an organic material, usually animal but allegedly can be human as well,
we'll talk a bit more about that in a bit. So we've got a fairly simple and fairly small grip
and then we've got a blade which is sort of machete like in that it is a cleaving chopping
blade that broadens towards the tip. Now if you read various internet pages talking about these
blades they will, a lot of them especially Wikipedia, will say quite categorical things
about them having a convex and a concave edge. Well in actual fact these only have one edge,
okay, sometimes the back which I would call the spine rather than the edge, sometimes the back
is decorated with perforations and funky kind of shapes and stuff but these are pretty much
single edged and the single edge is usually either pretty much straight or very slightly
curved like a saber like this one and sometimes you get more curved ones okay so you do get more
curved ones than this but they pretty much all the ones I've ever seen all broaden towards the tip
and essentially have what's a bit like a clipped back point, a little bit like a broken back sax,
arguably even like certain types of bowie knife as well. So the characteristic feature of these
blades really is that, I'll just turn this around because this blade is not symmetrical in a way
that I'll explain in a second and it's a bit more interesting on this side, these blades are pretty
much almost straight mostly with this characteristic tip shape again sometimes there's decoration on
the back and then one single edge. Now talking about the blade cross section that's actually a
specific thing which I don't see mentioned very much in descriptions online and so I'm going to
kind of explore that a little bit here. Now all of the original examples that I have ever personally
seen or handled and I haven't seen hundreds of these but I've probably seen let's say maybe about
20 of them, they are not symmetrical in terms of the cross section of the blade so with this blade
for example if I just move a bit closer to the camera you'll hopefully be able to see that it is
flat it's actually very slightly hollow ground very slightly concave on this face but it's
essentially flat in terms of the grind and then it has a bevel on this side so it's asymmetrical
in that sense and so looking down the blade here it's flat here and then the edge bevel
is only on one side of the blade and they have put a delineating line a bit like a well a groove
basically a little bit like a fuller but it's not for any weight reducing measure it's just I think
to make it look more fancy but they put a line where the bevel begins so you can see that has a
flat section and then an edge bevel with a line decorating that border and you'll notice if you
look down the base here you can see the plunge grind where the bevel actually begins and they
put a little bit of decoration just where that is where that starts so that's something that
cross-sectional shape is something that seems to be quite common perhaps even normal for these
mandow and I will just pick up the other example I've got here okay and we find a very very similar
thing with this and you'll notice this blade is actually decorated with engraving all the way up
but you'll notice that it is essentially flat on this grind and then the edge bevel is only on the
other side so they're asymmetrical now moreover than that this is another thing I don't see
mentioned very much at all in internet descriptions of these both of these examples now I can't say
this is true of all examples but it's certainly true of these two if we look down the blade
they are both curved in terms of almost like they've got a warp okay now this could be accidental
but I know a number of people who say that this is deliberate and this is to assist with the
taking of a head so quite simply if you imagine that your blade is coming in this way cutting
the fact that there is a slight bow to the blade means that it's going to bisect through a neck
without interfering with the shoulders because the the hilt and the tip curve up and away from
the shoulders so you can take a head off cleanly with the blade curving away and cutting like this
through the neck now whether that is true I presume also you probably cut from the back
and go in at the spine side first and come out of the throat this is my guess
now one thing we have to point out is that these many many of these were made for ceremony and for
wear so a lot of these have been made in the even in the 20th century mostly in the early
20th century now these examples in terms of date it's somewhat difficult to date these
but I presume that these are late 19th or early 20th century they clearly have quite a bit of age
to them because of the way that there is wear and tear on the various components of the scabbards
but anyway the fact is that these seem to have kept their design so even if they weren't still
doing head hunting in the early 20th century they were still making their mandal swords in exactly
the same way as they had been made for the last however long probably 200 years I would think at
least so these are essentially seem to be specialized beheading tools but that being said
there are simplified versions of these and these were used as fighting weapons as well they were
used probably predominantly with a shield but they were used as side arms and worn by themselves as
well for self-defense they were therefore inevitably used against animals in hunting
and they were also used as tools to some extent so they were probably used in a similar way to
a machete some of the time that being said my personal opinion based on the construction of
these hilts and the ornateness of these hilts is that these particular if I just get you a little
closer look these particular very ornate designs with a huge amount of carving in them I don't
think would be everyday tools because they would just take too much wear and tear now let's talk
a little bit about the material and design of the hilts you'll notice that these two are different
despite the fact they have a similar overall look they are clearly made of different materials now
this one on my right appears to be made of horn as far as I can tell and this one on my left
appears to be made of bone that being said I know lots of these are made of antler as well
it is possible that this is antler rather than bone but I think it's bone looking at it
and very very ornate carving particularly this one with the white hilt so I'll just
let you have a little bit of a closer look at this and you'll be able to see the extreme
amount of detail that's gone into carving this really really crazy anthropomorphic shapes
animals I have heard that the type of carving that they use on these relates to what the material
is that's been used in the construction of the hilt so if you use an animal bone you'd do animal
carvings if you used a human bone and allegedly that was done you'd do anthropomorphic carvings
so human sort of inspired carvings and whether that's true or not I don't know but I have seen
a few people write that now you'll notice that there is some hair sticking out of these we'll
look at the scabbards or sheaths in a second now again this hair I've seen many many people and
you notice that this one would have had a lot of hair sticking out of the end originally and it's
lost it because it's fairly old I think but you can see some hair sticking out here some out here
it's lost the one on that side some out the end and this one's got it sprouting out of various
holes the top and the front and various places now for the most part this seems to be animal hair
probably pig hair for the most part but it is suggested that some of this hair is human hair
as well so again it comes back to this I think quite macabre view from a perhaps a kind of modern
or a western point of view that human components may have been used in the manufacture of some of
these I've got no evidence that either of these that's the case the other thing that's very very
important to mention as well is this type of braiding or wrap here now this one is actually
brass wire let's see if you can get a bit of a closer look on that and I think that they would
have used whatever they had available so this is brass or copper wire braided which gives obviously
a good grip and helps keep the material together prevent it from splitting this one is rattan
okay so rattan is actually a far more normal wrapping material for the grip here and again
that helps prevent this grip junction from splitting and if we go over to the sheaths or
scabbards you very often find as you can see up here you very often find rattan used to bind the
two halves of these wooden scabbards together and just to look at the construction of those for a
second they're fairly typical of well lots of different types of scabbard construction from
all over Asia actually but essentially you've got two bits of wood two slats that are hollowed out
slightly to accommodate the blade inside here and then as you can explicitly see with the back on
this one it has rattan binding which to hold those two halves together and this rattan is clearly very
old and has disintegrated to some degree and then on the outer side because obviously this would be
worn against your body so this side's undecorated and then the side that will be facing outwards
you have lots of decorative plates and it must be said that some of these have a almost a container
or another sheath built into the outside face and that has a knife like a I guess a typical
utilitarian or perhaps skinning food preparation knife which sits in the front a bi-knife essentially
which sits in the front of the sheath so that is the Borneo Mandau which is I consider pretty
obscure weapon they don't receive an awful lot of attention and I don't think that they're
hugely studied and some of them are made of quite interesting locally forged iron deposits
basically forged into steel blades and they seem to be pretty damn good quality steel actually they
retain a very good edge both of these are pretty damn sharp I could go and cut up anything I wanted
to with either of these right now they're small and nimble things used by people who for the most
part not wearing an awful lot for combat or as we've said beheading in some situations so for
that reason some people are kind of put off by them because they're seen as quite macabre and
distasteful shall we say which is silly really because that ritual is no different really to
very interesting cultural artefacts and it would be great to see these a little bit more widely
known and acknowledged they're actually not difficult to collect they're not obscure in
terms of there's quite a lot of them around but they're just obscure in terms of the fact that
not many people talk about them or know about them in fact so hopefully I've helped change
in my little part so there we go there's the latest in the obscure weapons series the Borneo
Mandao or Dayak Mandao and if you have any ideas for another weapon that you'd like me to try and
procure and talk about in my obscure weapons series then of course you're very very welcome
to post your ideas below any other points you want to make about these Mandao swords
very interesting very interested to hear those I'm in no sense an expert on these or even weapons
of that area so I've told you what I've known what I know about them and what I've observed
about them some of which especially to do the blade cross section I don't see many people talk
about online anyway and yeah if you know more about them or other points you want to make about
them observations about the Dayak and about their warfare and other weapons they used very interested
to hear those as well if you're not subscribed please consider doing so and click that notification
bell and so you hear about new videos coming out and I'll see you really soon again on the channel
for another video cheers folks
