Today we create a beautiful wave patterned end grain cutting board from raw live edge olive wood lumber :) We use routers, table saws and even let the end grain board run through the planer! Enjoy! =D
0:00 Intro 0:56 Choosing deez Lumber 1:55 plis sub 1:59 Preparing the Wood 3:10 Planning out 3:58 First Cuts, fine Tuning and Gluing 5:43 Preparations before final Gluing 6:55 Gluing, Routing, Handle creation 8:20 Grande Finale?... 8:40 Major Improvements and Big Reveal
today we are going to create a beautiful
anchoring cutting board from a raw piece
of olive wood lumber it's going to be a
fun one stay tuned
good morning fellow woodworkers welcome
back to our video i probably don't need
to tell you this but olive wood is just
one of the most beautiful wood types out
there that does exist here on this
planet and i want to create my very
first own cutting board from olive wood
today and i want it to be an end crane
cutting board so we got two challenges
today try to figure out how to create a
cutting board and how to create an end
grain one i already have a few ideas in
mind and at first i'm going to get
myself the most beautiful piece and the
thickest piece it's just me oh it's
olive wood looking kind of thick
of olive wood out of my basement here
give me a second i got 75 kilograms
lying around so i'm probably going to
find a piece which is going to fit my
needs
yeah that right here is already a pretty
good piece of lumber but maybe i should
save this one up just just look at the
olive wood look at the end crane it's
amazing but i should probably save this
one up for i know something to do with
epoxy so i'm not going to waste the big
pieces i'm going to take a look for
smaller pieces
okay yeah this is probably a bit better
so i got this one right here
but i'm not certain if i want to use
this one because it got a bunch of
cracks so this is also
not one that we are going to use but
yeah this one right here is looking
pretty promising this is already
more than enough to create a cutting
board and it already has a nice size so
i'm going to go with this piece of olive
wood which also had a very nice end
crane coming with it and then we are
going to see if i can turn it into a
cutting board let's go
by the way if you're enjoying my videos
definitely make sure to subscribe to the
channel
[Music]
if you haven't watched my video yet on
the metabo d830 thickness blender then
you should do so link in the description
this thing is an absolute beast such a
good investment comes at a very
affordable price about 700 i know it's
not a beginner tool for everyone it's
not affordable to everyone but if you
got the funds get yourself one of these
such good tools just look at
this result i love it i love it very
much and now we are going to go ahead
and cut off these parts at first and
then we are going to try and get it
square
i use the stop block to keep my big
piece of wood from sliding around while
sawing after that i took several passes
on every card to not overload my table
saw all the wood is damn hard gotta take
it slow here
the smell of olive wood is just freaking
amazing i don't like eating olives they
just taste disgusting but the smell is
really good i'm going to keep this piece
of wood i'm going to probably make
something out of it at some point in
time
once all of the live edge was done i
took off just a tiny bit on the shorter
sides to hopefully get a square block of
wood
i'm basically done on the table saw
right now i checked several time with my
mighty carpenter square if everything is
nice and square maybe i'm still going to
let it run through the planner but this
already feels pretty jointable i don't
think i need to do
any more on these sides other than that
now it's about designing how the end
crane board is going to look this right
here is going to be the crane which is
going to be seeable on top
meaning what we are going to do is we
are probably going to cut
along these lines right here maybe also
on this line and then we are going to
turn around the crane tunnel bit to
alternate it overall then i'm going to
do everything together and last but not
least we're going to turn it into a
finished cutting board by gluing
everything together once again after
cutting it once again so much cutting
involved on these end grain cutting
boards
next i measured how thick i wanted the
stripes to be and fix my stub block
accordingly to get reproducible results
on every cut then it was on to sawing
again in multiple passes per cut
but not least i ran all three blocks
through my planner to get them square
and to the same measurements
[Music]
now i'm done letting everything run
through the planner i decided to do so
once again because they weren't
perfectly i'm square after cutting them
once again so i still need to practice
this i'm not a master craftsman as you
obviously might have noticed up until
now but now they are all on the same
height they are nice and joinable they
have very smooth surfaces and now you
can probably see what i mean by
alternating end crane so if we take a
look here i'm just going to change this
direction now you can already see that
the crane is completely different right
here that the hardwood
is
on the side and the two separate parts
on the side and if we take a look at the
end grain it's alternating now what you
can do too is you can cut it like this
once again and then like go through the
planner and then alternate the crane a
bit more shuffle it around if you wish
but i think um i am pretty uh good to go
with this blocky kind of look and i'm
going to glue everything together and
then i'm going to come back tomorrow cut
everything and glue everything together
once again glowing went fairly well with
pronoun glue by using multiple clamps i
made sure to give the glue a bit of time
to dry before the final assembly and
once everything was in place i also used
some scrap pieces of wood to keep them
aligned during the curing
on the next day i got rid of the glue
stains and went back to my
shop aka the shed
once i was there i ran the whole thing
through the planner and then table saw
action was next on my list once again i
resorted to using a stuffed block to get
reproducible results during each cut the
distance between my stop block and the
saw blade was set to 20 millimeters
which will also result in the final
thickness of the cutting board at around
two centimeters
last few cuts seemed dangerous to me
since my hands would have been really
close to the plate so i fixed my block
of olive wood in place using clamps too
i want to keep my hands a bit longer
better safe than sorry guys
so
i'm basically done sawing everything you
can see a few inaccuracies
i don't know why that is maybe my jig
isn't 100 accurate
overall i don't know i need to find a
source for these arrows but this really
doesn't matter i can send it down later
so i still have a block of olive left
i'm not going to use this right now
because i can really create another row
so yeah this is going to be the cutting
board it's a perfect size it was
supposed to be a small one and now it's
onto glueing i suppose
[Music]
glue dried for a whole noon and now it
was about time to sand everything using
my random orbital
then i cut the board to its final size
and after that was done i had my cat and
made my camera shot
over at my router table i plugged in a
round over bit and tested how it would
look once i was fine with the results i
ran my bolt through the router
this corner running maneuver looks
pretty dangerous but to be fair i didn't
have any kind of jig around and i really
held on tied to my board and it all went
perfectly fine don't do this at home
kids build yourself a jig
next came the handles i fixed stock
blocks in place and installed a cove bit
i took very light passes from underneath
the board until my handles were done
very easy and effective to do it like
this i was surprised how well it turned
out very surprised
so folks after quite a bit of work here
comes the reason why 99 of you clicked
on this video
to see me oiling that let's go
stop right there egit
don't you see these slew marks all over
the place
i was sure that i could definitely do
better than that let's skip to the next
day
i took the dive and ran the board
through the planner very very light
passes about 30 side did the trick and i
was so damn happy with the results a
dedicated video about running and crane
mods through blender will follow soon
and once it's there you can find a link
on the end of the script
and now we can really enjoy the reason
why all of you came here in the first
place here's a big reveal
[Music]
[Applause]
[Music]
[Applause]
[Music]
[Applause]
and this concludes today's video and i
hope you did like what you have seen
today
i learned a bunch of things from
creating this and crane cutting board so
what i noticed is that sanding is
absolutely horrible if you don't get
accurate cuts from the get go you have
to do a lot of sanding i can think of a
way to put this end cream board through
a planner to get the final shave done
but maybe there's a way to use for
example my cnc at home or some kind of
router jig to get the surface nice and
flat other than that it worked out
anyways with a lot of sanding about 30
minutes which was quite annoying but i
really have to admit for a first time
project okay just trying it out because
i had olive wood lying around it turned
out pretty good what i'm most proud of
is the fact that i actually got all the
intersections of the wood right so
there's not even a millimeter of
difference in some kind of way all the
edges and corners align perfectly which
makes it even more
enjoyable to look at this cutting board
and if you want to build along you know
how you can do so by taking yourself
a block of olive wood and then just
trying it out for yourself other than
that i hope you did like the video and
if you did then definitely make sure to
subscribe to channel and up in the next
video and wish you guys a flammable day
ciao
[Music]
[Music]
you