Today we will take a slap of walnut and create the perfect DIY present for every coffee lover with a Shapeoko CNC! :) Don't have a Christmas present yet? check out my shop to buy one of the boards! =)
🅱Tools I used:🅱
Bosch Router: Shapeoko CNC: Einhell Random Orbital Sander: Epodex Epoxy:
today we are going to turn a slap of
walnut into stunning board for coffee
lovers with live edge and black epoxy
details stay tuned
a good friend of mine will celebrate his
birthday soon so i thought i might
create something special for him this
year
i think we've got a winner
first we let the board go through the
fitness planner to get rid of all the
schmutz
nice what a fine board
after that i decided to cut off one of
the live edges to see if there were any
major internal cracks inside of the
plank
then confusion kicked in because my
hands are refused to slide smoothly over
the track for no apparent reason at all
[Music]
and after getting rid of my terminal
retardation i could confirm that the
board was good to go
for this project i wanted to preserve a
bit of the live edge and since i had a
bit of leftover black epoxy resin from a
different project at hand i decided to
fill a bunch of cracks with it for the
memes
then i went home letting the epoxy
harden overnight
in the meantime i went over to fusion
360 and started to design the board from
scratch
i went with the four young bear and the
slogan today's good mood brought to you
by coffee
for the design i had in my head i also
wanted to include a minimalistic coffee
mug
this one took me quite a bit of
experimenting around but it turned out
very nicely overall i was very satisfied
with the result
for the steam on top of the cup i wanted
to go with a sine wave to include my
maths major in a really meta fashion
well facebook reference if you know
where i'm getting at here but googling
didn't help so i took matters in my own
two hands and approximated a stretched
one
finally my mathematics major paid off in
some kind of applied way i'm so proud
about myself
last but not least it was off to
centering and outlining the board as
well as extruding the parts to the
appropriate dimensions
and then i implemented the tools in cnc
modes encrypting with a 45 degree bit on
the text rounded square outline and also
the coffee mug and the cutting mousse
will be done with a quarter inch spiral
bit
next day i was back at my workshop aka
the shed and i took the precise
measurements and adjusted them in fusion
again before cncing before taking on the
walnut board though i prototyped on an
old mdf board to see if everything works
out as planned that's the 45 degree
engraving bit from carvate3d by the way
let my camera decided to provide us with
such a good shot of the tour
yikes
first try fingers crossed
[Music]
i actually thought that this might cause
problems take a look at that
there's really no engraving up until now
and i believe this is due to the weird
coating that
carbide 3d put onto the cutter which is
really weird i don't know why that is
but i should get rid of it probably to
really make it work i don't know why
that is but i'm going to peel it off
yeah that was weird but
i seem to have to peel it off before
using it but never mind it didn't hurt
the cutter let's continue
and now obviously my depth of cut isn't
[Music]
accurate anymore okay let's do it again
fingers crossed
that looks fantastic
and there we go the first successful
encraving attempt with my new cnc ah i'm
so proud of myself
holy moly that was immensely satisfying
to look at and the result looks
fantastic even on this mother old mdf-4
just look at that
now it would be a waste to throw this
one away so i'm going to implement a
small cutting move to basically cut it
out and then we are going to apply it to
the walnut board
this is fantastic now i know why so many
people love to create science this is
seriously satisfying and i really like
the four and and how the cup turned out
overall it just looks very very nice and
i think i did a really good job in
fusion now let's go
and here we go first prototype done from
the mdf board tiny little bit cleaned up
not perfect yet but i'm going to paint
it at some point and i'm just going to
give it away to someone and now off to
the walnut we go pretty excited about
how that is going to turn out
checking again if the dimensions are
right
i then went over to my shear poke and
started milling i'll let you enjoy the
scene for a second here
sadly my depth of cut was a bit high on
the quarter inch bit and a few chips
broke off from my board but i was able
to collect all of them and gluten back
in place i'm such a lucky bastard
then i sanded a bit to see if there were
any major cracks left for me to fill
with glue and wood dust and yes there
were just a few tiny little ones
letting it dry for a while i then
proceeded to round off the board on my
router table
a shallow radius on top and the bottom
and later increasing the radius a bit
more for the looks
after that was done i started sanding
with my random orbital going in with an
80 grit first and then a 120
180
and last but not least a 240
and last but not least cleaning up the
engraving and doing a bit of hand
sanding to remake the work shine
holy guacamole that turned out so much
better as i thought it would it's
amazing it looks terribly fine and now
here comes the moment why 99 of you
even watched this video in the first
place namely i'm going to oil that beer
up as always i'm going to use hard wicks
oil from lignocolor and
i hope it's going to look good on the
walnut i haven't tried it out yet so
yeah we are going to see also i really
like the little epoxy inlay that we got
here on the back
the the epoxy filling as well as the
live edge that we got here i think it
gives it a very unique touch also in the
small cracks that we had here the epoxy
really makes it very very lively and
even looking really good on the back and
now we are going to oil it
damn son that looks fantastic
and here are a few shorts of the final
product
[Music]
and this is it once again and as always
if you did enjoy the video then
definitely make sure to subscribe to the
channel and to share the videos around
etc before the youtube algorithm and i'm
really satisfied with the result it
turned out so nicely i really like the
design i just like how everything turned
out overall with the live edge and
little epoxy that i was using and just
everything overall it looks absolutely
stunning and i hope my buddy is gonna
like it and as always with these new
products that i'm designing you can find
them now down there in the stem merge eu
shop you can buy yourself some of these
coasters cutting boards signs whatever
you want to use it for over on
stemming.u for pretty affordable price
also this time the first time you can
also get yourself the plans if you want
to go ahead and create one for yourself
on your cnc you can get yourself the
plans for like a bug or something over
in stem rich dot eu too so if you wanna
create one for yourself definitely make
sure to go over there and get yourself
the plans and other than that i think
guys watching if you want to see more
content then definitely make sure to
subscribe to the channel as mentioned
before and after the next video i wish
you guys a flammable day please stay
safe see ya
[Music]
[Music]
you