Get your hands on my handcrafted Merch over on https://stemerch.eu/ to support the channel, including the customizable sign that I created today! :) Check out my epic Collab with @katzmosestools in 50k FPS! :D https://www.youtube.com/watch?v=YObVR9Rj_38
Today I build a fine looking birthday present for my 80 year old Grandma! She really loved the look of the sign which had a ribbon engraved in it, as well as her age, name and the words Happy Birthday! Enjoy =)
today i draw my hands on my first inlay
project as a birthday present for my
grandma enjoy
last autumn i wanted to finally try out
inlaying with my cnc and the 18th
birthday of my cranny was the perfect
opportunity for that
the present i had in mind was a sign
that said happy birthday roswita and had
her age on it including her year of
birth and birthday
the design was done in fusion 360 as
usual and design was supposed to
represent the disc with ribbons attached
to it
initially i planned to inlay the number
80 and all the bigger letters but you'll
see later how that turned out
at my old workshop aka the shed i then
cut a piece of acacia wood to size that
i could fit into my cnc
[Music]
the sign had pretty big measurements so
i had to place it quite accurately into
my shape poco such that it was still in
the range of its axes
but
this made the workholding rather hard
and then the first phase of the project
happened
i walked away from my shed for literally
just one second and the carbide 3d
machine already betrayed my trust
that one gave me a shock honestly i
wasn't prepared for that to happen
[Music]
well back to square one once again don't
won't talk about that anymore this never
happened okay cutting acacia would
screwing the board down this time and
cutting with the cnc
[Music]
so this is what it currently looks like
and it turned out rather okay apart from
a few things that um just suck but i
need to fix those i think i can
if you see
this part right here for example a bit
of wood broke off at this part
also quite a bunch of wood broke
out here i don't know if i should just
um flatten the top again and just
engrave everything again or maybe i'm
going to go the route and just use my
router table and try to
fix these sides up using a round over
bit or like whatever it is i'm going to
come up with a solution in some way but
up until now it looks really okay let's
try to get it out of the taps and let's
see what we can do next
next up i went over to my router table
and gave both sides a round over
[Music]
i mean it does look pretty good
with the round over bit really really
good but the thing still is
that this right here is still broken so
yeah i think i'm going to
basically bring it all down by two or
three millimeters this is plenty fixed
so this should work out no problems
asked and then i'm going to engrave it
once again in the hopes that i'm going
to hit the right zero and homing
position once again
in actuality that would have been too
much of a hassle and quite honestly i
would have messed up the centering even
it was just off by millimeter that would
have bugged me later in order for me to
prevent that from happening i gave
everything a third shot also i figured
that inlaying all the letters would be
way too complicated for my current skill
level so i also changed the depth of cut
of these two simple engraving
and once that was done i used my
smallest chisel to clean the bottom of
all the encrypt numbers and letters
honestly i'm pretty satisfied with the
result what i didn't notice is that yeah
i think i had a branch
going through the whole part right here
and it broke out i need to glue this
part down this ain't a problem but i
need to fill this part up or maybe i'm
just going to take uh like some kind of
flower and put it over there just to
basically um hide it but i can still
glue this part up this is the one that
got lost during rowling but other than
that i'm pretty satisfied with how
chiseling turned out um i can't complain
about that pretty good result to be
honest now you see on the four for
example or on
um i'm missing the little dots right
here in the middle um luckily i still
have the other sign lying around that
didn't turn out too well
um and i can basically just chisel off
the part of the a and the four and glue
it on here this is what i'm going to do
next
first things first i put a branch back
in its place with some good or wood glue
and then i carved out the big old
letters from beechwood
[Music]
oh that one fits really well really
snugly and nice and let's see if the
eight finally fits
yes with a bit of force it's definitely
going to fit
okay so for the downwards motion i
actually added a bit of a you can call
it chamfer but i use my chisel to
basically get a bit of a gradient here
um such that it slides down nicer what
i'm going to do now is i'm going to use
glue and a bit of sawdust from my
from the beach wood and then i'm going
to fill all the holes which are still
there and yeah all the empty spots
and i hope it's going to look good after
that
see these empty spots this is where i
took additional stock just to make it
fit more nicely and i'm going to fill
these up with glue and a bit of sawdust
and this should basically fix all the
missing lines up i think that's going to
work
[Music]
they seem to be both on the same height
so that should work that should be the
limit i think
very nice i got it to work very
satisfied with that that looks good
and next came a pretty tedious part
after letting the wood filler cure for a
bit i then use my japanese blog planes
to fland the two letters that one took
quite a while but i got it done i was
pretty proud of myself
next came sending from an 80 grit all
the way up to a 320 grit
also just as mentioned before i took
care of the two pieces that broke off
this is where we are at right now and it
looks pretty good to be honest and i
fixed up these parts and honestly once i
get everything sanded and cut and
chiseled no one's going to be able to
tell that i had to fix something
especially not my 80 year old grandma
beautiful these fixes turned out really
nicely i mean here you can tell because
the colors a bit differently
but here you really can tell you
seriously can't tell this turned out so
well i'm so glad i did that
and last but not least after rounding
over in my router table again i did some
hand and also last bit of random orbital
sanding
now i was trying around with different
coatings and i came up with two and i
just want to try out one of these so on
the one hand we got only shellac on the
other hand we got linseed oil as the
first layer of coating and over it a few
coatings of shellac i think i'm going to
go with this version because i never
tried a combination of oil and shellac
before let's dive right in
and we are done with the happy birthday
sign and i think it turned out pretty
fine
i really like how the beach inlay just
stands out from all the other wood like
the texture of the beach wood
in contrast with the acacia what i also
find pretty unique is that with the
glued up wood that i bought we are going
to get on the one hand the lighter sap
wood standing out here and then we got
the darker hardwood here
which makes for pretty cool contrast and
i really dig that
and once again i don't really have a
workshop or something you might have
noticed i don't really have a huge space
at hand but i still managed to create
something like this just with minimum
requirements or just minimum things i
could use and without a work table or
the like and just as often with my
videos you don't need a big workshop to
basically create things like these
beautiful looking things a workshop
would be cool i would love to have a
bigger workshop but this isn't something
that i have right now and i think it's
like that for many people that if you
watch the bigger youtubers with their
big workshops it can seem kind of
intriguing and you might get the
impression that you need a big workshop
with a nice work table to get things
done but you don't need this actually so
for some projects you definitely need a
big workspace and the like but for
smaller projects like this
minimum requirements are actually
totally enough for everything to work
out so don't get intrigued by those big
youtubers and just get to crafting
something really doesn't matter which
space you have available just do
something and try your best and then
everything is going to work out
eventually this was just a little
message of the day and if you want to
see more content like this if you're
interested in more diy projects as well
as woodworking in general then
definitely make sure to subscribe to the
channel it would really really support
the channel a lot and after this video
has been posted these signs are also
going to be available for sale over on
stemmage.eu just like my other projects
like those headphones stands and the
like handcrafted products and the best
thing is these are going to be
customizable so you can customize every
part of it however you wish and i'm
going to create it for you and you can
even tell me which wood types you would
like to have if you are not um fond of
for example this acacia wood because you
don't like the
um the contrast that you see here so
yeah definitely make sure to check out
stemmitch.edu to support the channel a
bit more if you're especially generous
today and other than that i thank guys
for watching and i went to the next
video i wish you guys planned the day
please stay safe ciao
you