Today we continue the pear tree saga! We take all of our boards and strap them up in newly arranged stacks. Letting them sit in my hot attic for ages will then (hopefully) provide me with boards that are neither cracked nor bowed for the most part. In between we continue to measure the moisture content inside of the wood to see our progress :) Enjoy! =D
hey
well hello there we are still not done
with the pile of wood yet
we are still going to um
engage with it over the next few weeks a
bit more
there are a few reasons for that so
if you got wood like this what you don't
want to do is keep it in one stack all
the time at least if you kill trinette
or the like
what i'm doing here is basically kiln
dry it
um mold is going to form under our
little
wood blocks that we have placed to
basically separate the wood for some um
ventilation um so we need to restack it
and just rearrange the the stick
every week or every two weeks
really not matter too much um other than
that what i want to do is i want to see
what the wood moisture content is i got
myself dr meter i don't want to use my
my one with the pins anymore because
they just suck and they damage the wood
and like so i got myself this one right
here
it's only about 20 bucks on amazon but
it's doing a fantastic job i don't want
to use like the whole like the orion
that black taste studios is using just
because for one main reason namely i
don't care about the real moisture
content at all a whole separate video on
moisture content in wood and how you can
find it out etc for your workshop is
going to come soon but other than i
don't care about the moisture at all in
in the wood not the exact one
what i only care about is that if the
wood that i have here now
is in an equilibrium with the moisture
and the humidity around the place here
and if i take a seven piece of wood
which i'm going to do in a second
which i know is extremely dry because it
was lying here for ages and i have a bit
of pear lying around
that i can test and it tells me for
example ten percent moisture continent
is completely dried out wood at least
for my shop
then i can compare it to my other wood
that i got here and if it's still above
those ten percent then it's still not
dry yet because it hasn't reached the
equilibrium that the other wood did
yeah and this is basically what's going
on today um we're going to restack the
wood we are going to rearrange our
little wooden blocks a tiny little bit
and also we are going to check the
moisture content for a bunch of boards
and i hope you are going to enjoy now
let me grab this little piece of pear
and then we are going to see what the
moisture content on this one is and then
we are going to compare it to the other
boards
so let's check a few different wood
types and let's see what the
equilibrium is so i got a few different
ones this right here is a cookie also
from the pear tree i have cut it before
cookies usually dry out more than the
regular wood
in the sense that if you got any crane
boards like those cookies they are going
to lose all of their moisture through
those little straws through the wood
fibers and they are going to try out
pretty heavily in many cases and quicker
than the other regular wood because it
has less distance to travel so
this right here is pear tree as
mentioned before just like this one it's
lying around for about two weeks now
this this cookie and it was pretty hot
in in here probably
35 to 45 degrees celsius up here and i
choose the density of four here this is
the density setting um i got a rough
approximation after googling what the
real density is of the pear tree and
then i just looked at the table which
comes with the manual basically and yeah
it should be about four and if i now put
the mr meter
doctor meter excuse me on here it has me
seven percent water content which is
completely good to go i can use this
cookie it's totally fine
now what about the other pear tree this
right here is from the same tree once
again but regular boards that i have cut
in the previous episode of the workshop
vlog now if i just check the first board
let us see what the moisture content
already is
7.5
right in the middle and it should be
like that almost everywhere
yeah
near the bark seven percent but as you
can see this board up here has reached
equilibrium already because i can
compare it to this cookie
but to make really sure that it reached
equilibrium i need to take a look at a
piece of wood which i had lying around
for ages already like this piece of
olive
i know it's completely dry most
definitely has been lying around here
for
for
the longest time right after i moved in
here and received my laguna benzo so
over half a year by now and i should up
the density a bit
olive wood is in the range of six and
let us see what the equilibrium
right here is
and it's about 6.5
it could also be that olive is in the
density setting five let me see
yeah five seven percent
this fits it a bit more
i would need to look at the
something fell down at my heart
for sake
but i would need to look at the
instruction manual to see what the rear
density setting is for olive oil but
yeah you can see equilibrium at the
moment at my shop in the summer is about
seven percent and we can use this as a
reference to compare if all of those are
already a bit drier than they were
before last time i measured they were
about 35 percent moisture content let's
see what the last week only one week has
done to this wood and i was already able
to see after recycling it once in a tiny
little bit that some of the boards
already deformed and they all start
cracking and like just a use of business
that you have with um
wood being dried
yeah um i i hope this first part was a
bit informative and now we're going to
get into the rear game also
each and every day i come here i open up
the window just to allow for the
moisture which is trapped in here to
escape out of the room um yeah just to
basically reach the outside equilibrium
once again in here and to get a bit of
air circulation okay let's start with it
so at first i'm really interested in the
cookies and they still feel a bit wet i
mean it has only been one week but as
mentioned before
one week ago it was about 40 percent
oyster condom 35 to 40. and what about
now
13
as mentioned before cookies tend to try
out extremely fast since the distance
for the water to travel out of the wood
is very low
and for this one right here
three centimeters thick 13 moisture
contour and yes and you can see it was
completely straight before but now it
has deformed but one real or one big
reason for deformation is just this is
the part where we cut it off originally
and it just started to basically deform
at this crack and then the whole tension
which was inside of the wood basically
um yeah just spread across the whole
cookie i'm not gonna make much with this
part right here maybe i can kind of turn
this into some kind of bowl like because
it already has a bowl shape that you can
use for for various food types like um
yeah
like vegetables or something so next up
is this big cookie this right here is
the one with um
with about four to five centimeters in
thickness and by by the way dr meter has
a huge advantage that um it measures
inside of the wood up to three
centimeters deep um that's really
advantage of this little thing and if i
measure it here
tells me 12.5
what about here
here we got 25
15.5
[Music]
10.5
yep
and near the bark
23
there are various reasons why things
like this can happen i mean if you watch
the latest black case studio video where
you had the round table top
some pockets just tend to not try out as
fast as other parts of the wood slab
it just is what it is that is nature
sometimes you get some kind of burling
in their own life where water is going
to be trapped heavily this is just
something that happens also it doesn't
have a uniform thickness everywhere this
part right here is thicker than this
part and this is the reason why i can
get a very accurate measurement also if
it if this sensor doesn't like
completely 100 flat on the wood it's
going to give you a bit of a
um of a false reading but i don't care
about the speak one anyways at the
moment um this is not my priority my
priority are the cutting boards
basically that i got here like the um
like cookie cutting boards you you could
say with three centimeters of thickness
oh but but it has become way lighter i
mean this is better
this is way better than before
now what about the small ones here oh no
i got a little kela assad here little
bug get the off my property hey
billy hobbitty this is my property
now this one right here is
one that broke okay just happened that
something breaks and
oh yeah
you see it um this is what i mean this
is why we need to lift it up and restack
it because mold is going to form over
time it just comes naturally it's
extremely hot in here and also we got a
lot of moisture this right here was a
piece of wenge originally but now it's
just a piece of
mold more
more the um vengeance i need to restack
those a tiny little bit to get the mold
off um but but other than that um
to basically act against the mold what
you can do is just spray vinegar on the
parts where you had those little
wood pieces lying
um yeah after that moisture content this
right here is a flat surface most
definitely
and
it's about 31
here 25 here what about the pith
31
33 so yeah those still take quite a
while to dry let me see
what's up with the mould on the other
parts yeah they are all molding a title
but i'm not going to restack this one
yet i'm going to wait a time a bit
longer but
i got a moisture reading for now which
is i desired in the first place so yeah
this is fine i hope i don't get any bugs
here um
and this one right here 13 14
13
this one is trying out way better than
the other ones that i got here like the
half slabs okay very curious
now next up are the bigger slabs and
i can already see them bowing a tiny
little bit like this one right here it
starts to go like this okay so this part
right here is actually concave already
but this is just something that is going
to happen and this is why we fastened it
down
now what about moisture content i need
to
open up my density meter once again
[Music]
okay density four
what does it say
19.5 last time i measured it was the 23
and it was two days
ago 21 21
23
15 16 22 so near the bar
it tends to dry out quicker um but other
than that we are in interest in the hard
wood basically
and this is still about 22
or 18 to 22 percent
now what about the smaller
ones this is also bowing a tiny little
bit
that's 13
11
12.5
17
okay yeah those ones are trying quicker
obviously they are not as long as
those long ones
by definition so yeah those are trying
out nicely i still have like sacrificial
pieces
let me see how these are doing
14 percent
14
and 8 over here obviously this is a very
very crooked small part with a lot of
park but yeah they they are drying out
very nicely already even though it has
just been a week so with this kiln
drying method in my very very hot attic
i'm very certain that we can reach a
nice moisture equilibrium by
the end of august i would say maybe even
before that meaning
i can probably create um what i still
have in mind out of those planks
one being the
the job from my customers from my
clients and also
for my own personal home i still wanted
to create a bathroom vanity and what i
wanted is i wanted to use a life's a
live edge
pair piece
for the top so yeah i'm pretty excited
about that and that is drying out so
quickly and now i'm going to restack it
the reason why i already rested
something because this right here was
the thin piece of wood um only two
centimeters thick approximately and you
can see the huge crack it's not a
problem because of epoxy but um
still i didn't want it to bow in in any
kind of way because it's really fine
because of what it looks absolutely
gorgeous and this is why i put it
downwards a bit um just to counter the
crack and also it bowing let me see for
the moisture content very curious about
that
23 percent approximately at the center
30
on the set wood
38 on this subwood okay okay yeah just
comes natural okay
[Music]
so i was away over the weekend hence the
change of clothes um last time i just
couldn't bear working up here any longer
it was just way too hot also my camera
would overheat especially my sd card and
i can film in this environment so i'm
here at the early morning you can hear
the birds chirp in the background
yeah they are cute they are having young
guns but nevermind um yeah let me check
for the moisture content inside of the
cookies um some cookies started to split
up um maybe i should read into how to
dry cookies more efficiently maybe i
should paint the whole top such that the
moisture can't escape this quickly i'm
not certain but let's measure the
moisture
whoa
48
inside of this cookie is 29 here
30
41.
yeah so those are still extremely
extremely moist hence they didn't crack
up until now much but this was just
because they were lying a bit more at
the bottom in the middle so they didn't
try out that quickly okay let's continue
stacking these these stacks
okay moisture content a bit further down
the line
number four
whoa 16
27 at the piff okay understandable have
a great day
37 i was
really confident but well it just is
what it is but yeah nice um they are
still trying out very nicely
considering they have only been here for
about a week drying or something of that
sort already losing about 10 moisture
content that's pretty sick
[Music]
31
42 at the pits
30 percent
31 and right at the bar 24 okay
i'm feeling like toast
let's get the hell out of here
it has been a few weeks and
a lot has happened
i don't know how that happened but my
cookie tower
collapsed
and now a bunch of cookies broke
that's a bummer but there are still some
there
it has been
quite a hot time here in germany so
i suppose that many of those slaps
already dried pretty damn hard i could
just suppose i have measured in quite a
while and rearranged in quite a while
but i can just suppose that we got a
moisture content of about
12 to 17
now which is left i do hope so because
that means that in august so one month
from now i can most certainly work with
those slabs and can start building my
bathroom vanity and stuff for my clients
so yeah let us measure some of those and
yeah then we are going to see
how far they have gotten once again i
need a reference piece
to see what the
average moisture for a piece of pear is
going to be here in my attic
let me see
moisture content might have changed due
to the
weather
but yeah let's see
i got a piece of pear here and my
moisture meter my doctor meter now we
are going to see
pressing it really hard
seven percent at the moment
7.5 actually what about down here
7.5 you can see this one definitely has
reached equilibrium so that's cool yeah
that's most definitely nice
okay um
now i nearly tripped over something just
ignore the sounds out there
other than that let us now check what
the moisture content of the big slabs
are the cookies and the smaller slabs
let us ignore the collapse tower for now
and let's see
how this one is um cookie is love to
split open i mean there is no other way
for the wood to basically dry than to
open up like this i could have tried
them more slowly but i realized this way
too late once it has reached that state
they already broke and that's not a
problem at all we can fix it using epoxy
or leave it like this or put bow ties in
here or just tell them how they are as
cutting boards they are still pretty
beautiful now what about moisture
content
nine percent
twenty three percent so we got
a moist gap here ten percent
nine percent what about the center
eight percent
more to the bark
7.5
8.5
let me turn around and let's measure
here
29
percent
thirty percent yeah it still feels
rather moist on the downside obviously
the upside is going to be dried way more
now what about one that is lying here a
bit
um protected from the air above
25 and i can still smell it it still
smells moist but i don't have any plans
with those cookies right now 33
so
i'm still fine with those i don't care
about
them being dry at the moment all i
really care about are those slabs which
we are going to measure now so those
still need to dry for quite a bit and
i'm totally fine with that
let's loosen those
some of those develop cracks but that is
totally natural and not a problem at all
so if i just measure the top
12.5 this is what i expected from the
regular slabs
7.5
12.5
but i got the concave side here meaning
my measuring device has a little air gap
in between
um
the measuring zone with the
electromagnetic field and also the wood
so let's turn it around and then let's
measure the
the moisture content on the concave side
it doesn't smell too moist actually
36 percent here
27
here
14
more at the bark
eight percent
23 percent
what about the crotch
still 29
okay yeah yeah okay those are the bigger
slabs but they are not as heavy anymore
they are way lighter now so i can
already
say that moisture was escaping from the
wood most definitely
okay let's see
43
still
14
27
it turned off that's nice
17 18
34
so
which means
that i have to let them dry for a while
longer which is totally fine i can live
with that but we are making good
progress from over 50
wood moisture
down to um
20 to 30 percent which is
really good progress already
now for the stash that i care about the
most at the moment because i'm going to
build my bathroom vanity from it
once again with the moisture up here ten
percent something of the sword nine
percent so that upper part already
reached equilibrium
just like all the other slabs and
cookies before but most importantly
how is it
on the completely opposite side
let us see
not going to measure this one i have way
too much air in between the measuring
device and the wood
but what about this piece
twenty six percent
nine percent at the end crane obviously
this one is pretty dry there
thirty percent
okay
let's move on
that one is a good looking one
nice hard wood nearly no cracks that is
looking fine
only
twelve percent moisture at the hardwood
18
10
9
8 at the end right
thirty six percent here
we got a knot here which only has nine
percent
yeah that is a great one
eleven percent
that one is already pretty good to go
still need to wait a tiny little bit
longer but this one won't take that much
longer um i can work with this in august
i suppose in a month from now because
next time we are going to get extremely
hot weather here in germany
in comparison to the last years and i
think this is going to let them try
even better and more quickly yeah let me
wrap this up real quick
and this already concludes today's
episode on the workshop vlog and we have
done a lot of raw lumber processing and
drawing in the less time but i hope you
did enjoy this bit of theory that i'm
learning for myself now for the first
time around so it's a learning curve for
me and also probably for you the viewer
so yeah hope you are enjoying the series
thus far in two days i'm going to go on
vacation for two weeks so i'm not going
to be here in the shop but you are still
going to see some projects nonetheless
in videos and other than that um i thank
you guys for watching i have a bunch of
very very cool projects i'm working on
at the moment for my future house so
furniture in india which are going to
come out one after another up until
october i suppose and yeah
subscribe to channel if you want to see
more woodworking content and workshop
vlogs now but the next video and i wish
you guys a flammable day please stay
safe ciao
you