Hey, good morning everyone. Welcome back
to another episode on the
self-sufficient vlog. So, what do I have
here? I visited my grandpa in-law a few
days back and he gave me this over 4 m
long piece of wood that is normally used
to put into roofs um as the so-called
fetter. So, if you have a roof and it
meets at the very top, you're going to
put a huge piece of wood in there to
give it stability and so on to screw
everything else to it. And this right
here is by the by the smell of it, it's
it smells like orange, so it's probably
Douglas fur. And my mission for today is
to turn those pieces and also
those two
boards of I think it's it's pine if I'm
not
mistaken. Doesn't smell like ducklas fur
actually. And also a little bit of
profile wood which I still have left
from my garden house built into a high
planting bed
for a little raspberry plant that um I
have grown since it was so young. It it
was so tiny. It was pretty small. Um I
also got it from my grandparents in-law
and it was just growing out of the
crown. I was asking, "Hey, can I have
it?" and it survived the winter and I'm
going to give it a dedicated planting
pad. Yeah, this what we are going to do
at first and then something very special
um in the second part of the video. So,
let's get to resoing and the like this
while we are at my workshop and then
we're going to go over and plant the
whole thing in. So, yeah, let's let's
not waste any time, shall we? Let's go
to the band
saw. So, it's a fairly straightforward
project this time. At first, I went over
to my Laguna band saw and turned the
duckless fur into fairly square lumber
that I use as the four legs of the
raised
bed. To get rid of some saw marks, I
took some light passes on the jointer
and also fully squared up the lumber to
get a pair of perpendicular sides per
leg.
Olga then took care of all opposite
faces.
And my drum sander finally smoothed all
the surfaces.
[Music]
Next, I proceeded to cut all the legs to
length over on my sliding table
[Music]
[Music]
saw to later attach the profiled wood
and pine boards to the structure. I
added two grooves per leg where they
will later slide into.
[Music]
Just like with the legs, I went through
a similar process of preparing the top
and some of the sideboards.
[Music]
should be relatively square, I suppose.
And it's way more big than I thought it
would be.
Man, one is huge. That's what she said.
Yeah. I don't mind. Um I don't mind the
squareness too
much. Most important thing is that we
get those right. So what I imagined was
something of that sort. So, if we
overlap it just a tiny little
bit, going to be left with something of
that sort. Yeah, something like
that. So, I need to cut those down at
first a tiny little bit. Just getting
those squared up and then I can start
arranging everything and yeah, trying to
cut it to size, I suppose.
And in the process theoretically, it
should automatically get squared up
because under the condition that those
um outer borders or those those outer
blanks are relatively square. Um I can
just align those from here to there and
so on and everything should become
rather square in the process. So yeah,
this is like the only condition that we
are going to set here.
Now I need to
think. So how am I going to do
that? Should go something like this. I
think if I were to line it up with that
one for
No. How am I going to line it up exactly
like this? I think it should go like
this. And if I were to use my
domino, those should get rather
square. Yeah, I don't even need to think
too much about that whole process, I
think. Got to take my domino. I'm going
to make the first two butt joints here.
Got to square those up completely. And
once that is done, I'm going to start
aligning the other ones. And then it
should work. And then later, I can just
put it on here and then nail everything
or screw everything together. And then
we should be fine, I think. yet it's can
do like
that. And this is where the domino
joiner really shines. Like this
performance is just outright
ridiculous. Now I can square everything
up nicely. It's not a problem at all.
Very nice.
Splendid. And I'm going to repeat the
process on the last one, too. And then
we are done already.
I took those weird overhanging parts off
with my table saw later. And to top it
all off, I added a big chamber to all
the
[Music]
legs. With all of that done, I trimmed
the profile wood that I still had lying
around to size.
And lastly, I assembled the whole thing
with some bread nails and screws. Very
easy project, but satisfying to see it
fully built in my own garden.
Now for the gardening portion of the
video. I stuffed a bed full of organic
components such as
twigs,
soil, rotten wood that I found in a
nearby
forest. More
soil. More
wood. Even more
soil. Rotten leaves. and some storeboard
compost. And to activate the compost and
organic material, I hydrated it a bit
before adding the final layer of sandy
earth. And that's about it.
[Music]
There we go, little one. Let us move you
in your new home. Um, got to place it
here. Maybe I'm going to buy one or two
other plants, too. Let's bury it rather
deep such that it gets a bit of the
compost. Those are some nice roots.
Yeah, you're a nice plant. Okay,
perfect.
That is that
[Music]
done. Let's flood it a bit. such that
the moisture gets absorbed the first
time around with the deep layers. It
sends it takes a while to
absorb and we are
[Music]
good. A pretty cool one day project that
really added a nice touch to my garden.
Hope you did enjoy this episode and if
you did, make sure to subscribe for more
episodes in the self-sufficient series,
the self-sufficient flock and also my
woodworking projects. Up until next
video, I wish you guys a flammable day.
Please stay safe. See you.