0:00 Intro 0:49 Unboxing & Assembly 4:09 An Initial Problem 6:38 The First Cut 8:33 Test 1 Oak Plywood 9:25 Test 2 Hard Maple 10:17 Test 3 Milling & Engraving 11:14 Test 4 Black Walnut 11:30 The Ultimate Test 11:53 An UNEXPECTED Result 14:07 Final Verdict
Welcome back to my video!
Something arrived in the mail and I'm excited for this and you should be excited too because you
can get a great deal for something that you might be interested in if you are into machining,
engineering and maybe just general programming and the like. So let's dive right in by unboxing
and then by building it and seeing what it can provide us with. I'm pretty excited. Let's go!
That is nice. That is very nice. I never received an ear protection for a device like this but cool.
Oh goodness it fits so tight. And here it is. It's a tabletop CMC. A pretty small one by
Two Trees. By the way this video has obviously been sponsored by the wonderful people over on
Two Trees. They were so nice to provide me with this machine and I'm here to provide you guys
with an honest review and if it could be something for you. Now let's construct it.
Oh that is very cool. Oh that's already attached. Now that is simply amazing.
It's not gonna take me like three hours with my Shapeoco CNC. Back in the days I already
owned quite a bunch of CNC's during my time in the wood shop. Like this is the fourth or fifth but
that is nice. This seems to be easily constructible. Okay very nice.
It comes basically in one piece. Oh goodness gracious that is very cool.
And this is the size. This is the working size and more information on the specs later on the
specifications but that's already enough for most people if they just want to do
kind of small projects at home and this is pretty good for size. It's kind of similar
to my first CNC that I ever had and my first CNC was about three grand but this right here you can
get I believe for about 600 dollars. More information later on there. And that's basically
all about it. The last thing to do is to wire everything up which I'm going to do in my
workshop and to attach the spindle to the Z-axis. They also provided me with a more powerful spindle
500 watts but you can also attach your own palm router for example on here instead of using a
spindle which is even more powerful about 800 watts in output power. But I want to try out
everything vanilla as I always do here on this channel when I do reviews like just using the
Allen wrenches that they provided me with. I mean it takes a little bit longer but in and of itself
this needs to stand alone. You need to be able to set everything up with the tools they provide
you with and they do a great job. It was perfect. Took only about 10 minutes total. 15 minutes. Yeah
15 minutes was it and you have everything set up which is amazing. I'm going to take everything over
to my woodshop and then we are going to try this little one out. Let's see what it's capable of.
Pretty excited. Pretty big working area for such not very pricey CNC. It's great. It's great. I'm
gonna see how it performs. Really excited. Let's go. So I have now installed the 500 watt spindle.
Once I arrived here at my workshop it was very easy to do. Just a bunch of minutes but here's
something that I'm running into. I started the machine and I immediately noticed that the wire
connecting the power supply and also the spindle in and of itself is way too short. We have this
intersection right here which is the main problem. If I have it in this position this cable then if
I were to home the machine then my cable is going to be in the way and I just can't home it. I would
tear the cable apart or it would get such a lot of tension that that it would be unplugged. If I
have it on the other side though over here then I can't run the machine totally backwards because
it's in the way obviously because this part is connected to the front and this part is connected
to the middle one. Another problem you might see is that this cable is too short to let the
spindle head go over to the right hand side fully. So my fix here is going to be to just basically
cut open the insulation that we have here to make basically this intersection further away
from the machine such that we have a longer cable. That's the only fix that I can come up with and if
it doesn't work out then I need to do some electrical engineering and some soldering I think
and just putting stuff together. But I think this should fix it. Let's give it a shot and then let's
make the first cut. Otherwise this machine looks totally solid and I really like it up until now.
I want to see how it cuts. Let's proceed. I mean this is never going to happen ever but the cable
is now long enough. It works out. Everything's still plugged in. Oh here's another cable which
causes me trouble. Those do not lock in properly. So there are a bunch of things that are a bit of a
design flaw I think but I mean for the price tag it's to be expected that it's not 100% perfect.
So it's not a problem at all. You can fix it with some tape or the like but you need to expect some
things to not be totally perfect when you purchase a machine like this. But this is what review
videos are for such that they can improve on what they haven't done completely right and with the
next machines it's hopefully going to be a better experience in some kind of way. But everything
works out. The cable is long enough. I'm satisfied. Let's do some cutting. So there was an SD card
included with a bunch of files and I'm just gonna try those out but at first let us bring it to a
proper position. And this right here. No. This is the max speed of the machine when it comes to
moving along the axes. I mean it would have been nice if they would have added like a 100
millimeter option such that we can travel a longer distance with one button press but
it just is what it is. You can probably use something like easel to get it to the position
that you would like easier by doing different controls using your PC. But I'm going to do
everything just on this machine manual using the SD card and just the interface here completely
vanilla and we're just going to see how it works out.
So good news it does cut. It does indeed. Bad news I suppose this was an engraving and obviously
with a ball end mill that I'm using here and an up cut it's not a good result obviously but I
think it says TT something CNC. Okay let us introduce some custom files and see if those
are going to be accepted easily by the machine and then we're going to see how it cuts through
solid wood in some kind of way which is the most interesting for me. I'm not using plywood or MDF
or the like. So the program is done and the cutting quality is pretty good. I mean it did
what it had to do. It's pretty nice. It doesn't matter how it prints right here on the one hand
it's plywood and on the other hand I'm using an up cut bit so that's totally normal. I can just
sand it down but that was great. Yeah that was good. Bit slow but this is my fault. I could
optimize the file a bit more and use a different cutter which we are going to do now. I have to
admit it's pretty damn good to have a spindle machine again because my other CNC machines they
just work with a palm router and this one just does automatically start with the spindle which
is really really cool and the cut in and of itself is very good. There were no problems at all. This
was really nice and if you were wondering what those are those are just basically hold downs for
the stock because those made from metal are not very good just because if your machine were to
cut into one with metal then your cutter would break. So I want them out of wood so I'm kind
of upgrading the machine right now by doing those little projects. All right done. I'm gonna clean
everything up with my sander with my drum sander and then we're gonna see but other than that it
just looks how it's supposed to look. Looking pretty good for now. I did kind of a not good
program in Fusion 360. I did a trace instead of an engrave because I was lazy but this is
not the fault of the machine. This is totally my fault if it turns out a bit fuzzy.
The surface finish is seriously great. There's nearly nothing to send. Now there is another
thing that I'm really impressed by. If you heard the footage you were able to notice a very high
screeching tone especially in this direction right here. This is due to the chattering of the
bit. Like the flute is hanging out way too long. This is just due to the spindle not having enough
space basically to to fit the bit in. Now even though we had this chatter
my bit didn't break. I was fully prepared for the bit to break in between because of all the
vibrations and just resonance and the catastrophe happening. This is something that could easily
happen but it didn't and I'm glad it didn't even though this right here was a pretty hard test for
such a small machine. I was using a hard wood. Next to it being a hard wood it was also
bowed meaning on this side we had way more wood to take off and on this side less. So there was a
fluctuation in the amount of wood that has been taken off each and every pass or especially on
the first pass which everything was. This was just the first pass. Now this is really impressive
I gotta say because this right here is a really hard wood and this machine did it well. For such
a small machine I'm really impressed. So if you are in a pinch and you really need to do adaptive
clearing with a longer kind of bit with a quarter of an inch bit this right here is actually gonna
work out if you are in a pinch but I would not recommend it because this one could really break
and this wouldn't be good because they are kind of expensive and also they could fly in your face
and literally kill you. But it didn't do that with me so I'm very glad it didn't but as mentioned
before I'm kind of impressed by what it did. I'm gonna stop this test here because I have seen
everything that I need to see. I have seen the conventional and also the climate milling and
it did well. It did really well. Very impressed. Now personally what is the final verdict for me
when it comes to this machine? Over the years I have worked with a lot of CNC machines. Smaller
CNC machines, big CNC machines and also partially industrial CNC machines and I gotta admit that
technologically speaking we are pretty far in the game right now. When it comes to hobby CNCs
this right here is great. For the price tag this is an amazing product. I seriously have to admit
this. I would not recommend using the small spindle. To all of you I recommend buying yourself
either the 500 watt spindle or using a palm router and the attachment that you need to put it onto
the CNC machine. This is what I seriously recommend to you. Otherwise this thing for its size has the
horsepower to basically deal with all situations that you could encounter as a hobbyist. Even when
it comes to milling aluminum. I haven't done it personally but I have seen a bunch of reviews
where people have milled with this machine and the spindle right here aluminum which is really
great. But I have milled through acrylic too. The piece of acrylic that came with the machine
and it did do well. I mean if it can cut hardwood then it can cut certainly acrylic. I would
recommend milling with this machine using a quarter inch bit because of the chattering and
the possibility of the bit breaking right when it's milling and this is pretty dangerous. So I
wouldn't do that but when it comes to smaller bit sizes and maybe even engraving with a quarter inch
bit that is totally fine. It does do the job. We have done engravings also with the horse for my
child for Paulina. She loves the horse by the way. Seriously she seriously loves it. This was the
craziest project I have done on this machine for my daughter. It was amazing and overall when it
comes to hobby CNC machines this right here is great. This is the greatest one I have tried out
yet. I have tried other ones from Saint Smart and also my Snapmaker which was my first CNC
and none of those even come close to this machine. For the price tag and what it comes with even in
if you don't buy yourself the 500 watt spindle this right here is amazing. An amazing deal.
So definitely make sure to check it out. On the scale from 1 to 10 considering you are just a
hobbyist and that's someone who wants to go into big batch productions I would give this a solid
9 out of 10 in my honest opinion. It just did great. It did everything that I would want a CNC
for if I weren't in the business and try to make a lot of money with it. For that we got other
CNC's like Shape Poco or maybe Carbide 3D or the Workbee or whatever it is. But those are higher
price tags. For the price tag of this machine that is absolutely amazing and I just love the
versatility. You can also put on the laser head. You can also get yourself a vacuum cleaner attached
to it such that you don't have all of this mess lying around here. There's so much you can do
with this machine and I just love it and I can't wait to put this right here at home into my garage
and get to work just putting a few more things out like this turtle. I really like this turtle.
I'm gonna give this to my daughter too. This is gonna be for her little cup. Putting it on here
and I thank you guys for watching and I hope you enjoy what you have seen today and if you did
definitely make sure to check out the link at the top of the description to get yourself this
machine or maybe even the lower grade, not the pro version or maybe if you wanna be more than
just a hobbyist because you think you can outgrow this machine in no time at all then definitely
make sure to get yourself the 650 version I think it's the name and I hope this isn't the
last time that I can work together with two trees because this machine is awesome and I really like
it. It's very stylish. It was easy to assemble. Just overall the experience was great. Hence a
9 out of 10 and I would recommend it to everyone who wants to get started in the CNC business
and up until the next video I wish you guys a flammable day. See ya!