The Easy Trick For Cinematic Close Ups

Filmmaking Techniques
4 followers
This video is sponsored by Squarespace, the best way to create your website.
Part of what makes cinematography and lighting a difficult thing to learn is that the real world
offers a range of different environments and locations. In certain spaces, some techniques
may work better than others. It's the job of the DP to adapt and be able to light each location
adding light to the background here, a brighter key light in this space or perhaps a backlit
silhouette. Therefore it can be tricky to give broad general rules for creating beautiful footage
in different situations. There is however one basic trick which I like to use which is also
often used by many other working cinematographers today. I like to call it framing on the shadow
side. You can do this in just two steps. Number one, you need to decide where you place your key
light and number two, position the camera in a specific relation to the subject and the key light.
But what is a key light? Well, if you look carefully at the lighting across professionally
filmed content, you'll probably notice that often people are lit to be brighter on one side of their
face and darker on the other side of their face. You can very clearly see this in black and white
footage where the brighter side goes to a whiter tone while the darker side goes to a shadowy grey
or black. Creating this lighting contrast on faces is done very easily with what is called a key
light. This is the brightest light source which is used by filmmakers to illuminate the subject.
What determines whether faces have the split light and shadow or not is how the key light
is positioned. Imagine that there's a semi-circle around the subject. If you place the key light
directly in front of the subject at 90 degrees and shine it straight at them, then their whole face
will be illuminated and there will be no shadow. However, if you move the light source around the
semi-circle until it's completely profiled to the subject at zero degrees, you'll see much stronger
contrast. Now half the face will get hit by light while the other half is masked in shadow as it's
blocked from being hit directly. The most common position for the key light is to split the
difference between these two extremes and move the source back around the semi-circle to an angled
position of about 45 degrees to the subject. This creates a middle ground where one side of the face
is more strongly illuminated than the other with a clear split in exposure down the middle of the
face. However, some of the key light also spills onto the shadow side of the face creating a
triangular spot of illumination which lifts the darker side. This 45 degree positioning of the
key light is referred to as Rembrandt lighting, named after the Dutch painter who often used this
style of lighting in his portraits. The position at which you place the key light in relation to
the subject has a direct influence on the mood of the scene. The more frontal the direction of the
light is, the more fully illuminated the subject will be and the lighter and brighter the shot will
feel, both in appearance and in tone, which is why this style of lighting is often used for comedies
or upbeat positive commercials. While the more side on the key is, the more shadow will be cast
across the face which gives images a darker moodier tone. This style of lighting is more suited to
genres like drama, horror, noir or filmmaking that wants to impart a darker feeling to scenes.
Now that we know how we can place the key light, step two is making the decision about where to
camera in relation to the subject. But before we do that I'd like to thank our regular sponsor
Squarespace. Film freelancers are always wanting to grow their network. Having a website with
examples of your work which you can send to those new contacts is a must. You can build that site
with Squarespace. When I was first trying to put my website together my requirements were that it
should be easy for a non-web designer like myself to do and that it could guide me into a professional
looking design. Squarespace offers both. The intelligent design system gives you beautiful
template options which you can easily customize specifically for your needs to create a bespoke
online presence. Squarespace also makes it easy to upload samples of your creative work into a
portfolio through their video pages or by uploading images by using their gallery tool.
Check out squarespace.com for a free trial and when you're ready to launch your site go to
squarespace.com slash indepthcine to save 10% off your first purchase of a website or domain.
When framing a close-up of a subject filmmakers can choose to place the camera just as they did
the key light anywhere along the semicircle from a frontal shot to a profile. The easy trick that
many cinematographers like to follow is to place the camera on the opposite side to where the key
light is placed. So if the key light is placed on the right hand side of the subject then the rule
states that the camera should be positioned on the left hand side of the subject. In other words
place the camera on whichever side of the face has shadow. Framing faces on the shadow side is a
technique which has been used in various visual mediums from painting to photography and of course
filmmaking. Now we know how to position our key light and camera to get this higher contrast look
but why should we do this in the first place? One practical reason for following this rule is
to avoid casting any camera shadows. If the camera is on the same side as the key light
then there's a risk that the camera may move across this light and cast a shadow of filmmaking
equipment against either the subject or the background. However it's more often done for
aesthetic reasons. The key light can be frontal or on the same side as the camera however this does
tend to flatten out shots as everything in the frame will then have the same luminance.
Basically it gets rid of shadows which may decrease the feeling of dimensionality
as there's no contrast in the lighting which would otherwise create a feeling of depth.
This flatter high key look may however be desirable in certain situations such as for
lighter comedies or in commercials which want to achieve a brighter, lighter, happier feel.
However if you're after a little more mood, drama or tension then framing on the shadow side can
help to visually support that feeling. You can therefore bend this rule depending on what look
you're after. Using more frontal lit shots framed on the key side for a brighter, lighter feel
or more side lit shots taken from the shadow side for a more dramatic tone. Creating this
lighting setup and framing is easy for say a sit-down interview in a studio.
However more thought may be required to apply this principle in real world settings.
Many modern filmmakers want their lighting to be motivated by the natural lighting in the location.
For example if there's a window then the key light should come from the same direction as the window
to mimic that real world effect. In this way the position of the lighting becomes fixed.
So if the lighting is fixed then how do you frame on the shadow side?
Well all you need to do is position the subject to best suit the location by placing them so that
the key light is on one of their sides. For example make them sit perpendicular to a window
rather than them directly facing the window. Then frame your shot so that the camera
is on the opposite shadow side to the light coming through the window.
This same idea can even be applied to exteriors. You can't move the sun around as your key light,
however you can control where you place the subject and camera in relation to the sun.
To frame exterior portraits on the shadow side you can orientate the camera so that the sun
is on the opposite side of the actor. The only caveat is to get the sun in this position
you'll need to shoot in either morning or late afternoon when the sun is low on the horizon.
Where you place the camera in relation to the sun will affect the mood of the shot.
For example you can position the subject so that they are side lit
and the camera is on the shadow side to create some contrast.
Or for maximum effect you can shoot what we call backlit, with the subject positioned
between the sun and the camera. This will create more of a silhouette and an edge light
or glowing outline around the subject. You can choose to either let the lens flare
by letting the sun directly hit it, or mask the flare by positioning the subject
directly in front of the sun on the shadow side, for maximum beauty.
Hope that you were able to get something out of this video. Thank you to all of you for
supporting the channel, especially those loyal supporters on Patreon.
Otherwise until next time, thanks for watching and goodbye.
