Turn Thrift Store Crystal Bowls into Christmas Trees

Thrifty Thinkers
9 followers
Hi everyone and welcome back to my channel. Today I'm very excited because I am recording
using my new camera. Guys I finally got a new camera. It's not my dream camera but it's close
to it okay so it's an upgrade. So hopefully whenever I show you things up close it'll come
in focus. I still have to learn the camera again it's brand new this is the first time I'm using
it. So yeah thank you to one of my very generous family members. You know I really don't like to
call y'all subscribers. I like to call y'all my family members. So thank you thank you thank you
so much Alisa. Alisa Higgs. Thank you so much. It's normally me giving so it was kind of hard
for me to accept but thank you so much. Now with that said let's go. So what I have here are some
crystal and regular glass pieces that I thrifted. Some came from Goodwill. Some came from other
thrift stores and a few pieces actually came from an antique mall. I received a request from a
subscriber and I'll show her request right here. So I received that request. I had never heard or
seen the DIY of anybody doing a Christmas tree from thrifted glass. So I looked it up to get an
idea of what it was. So now I have a few pieces here that I want to use to build a Christmas tree
and I actually have another set of crystal pieces that I want to use to build a larger Christmas
tree. And with that one I think we'll add some bling to it for our bling girls. And this one
we are going to keep right. First up I have this glass. It's really pretty but honestly you can use
it as a candle holder too. Okay so I have that one. This is an option as a base for the Christmas tree
and then I found this one. Now this one is a candle holder. Isn't it pretty? So crystally and
pretty. That's another option for a base. I have this small piece. Like I said I have to shop
several different thrift places to find these. I don't think I'll be using that but that was an
option. I have this piece. I have these from the Dollar Tree days. I still have some of those in
stock believe it or not. I have this gorgeous candle holder that I found at Goodwill.
This is a gorgeous piece that I found as well. Another thrifty piece. And finally Dollar Tree
still has these guys. This is one of the Dollar Tree bowls and I went there looking for that one.
And I have a bell. A crystal bell. So this is what we have to build our tree. So let's get started.
We're going to start with the big bowl first of course. Let's move this around. If we decide to
this as a base. I want this to be upside down of course. So I would take this bowl and put it on
top like that. And that's going to make it taller. Or we can use this particular candle holder and
make it shorter. I like the idea of this one. Since I'm sure I like these two pieces together
I'm going to go ahead and use my Gorilla Glue. Alright so just go around the perimeter.
Now let's put this right in the center. Let's go to our next size up. Naturally we can't just
sit it there. I need something to put between there. So I think I want to go with this and
then put this on here like that. So I'm going to put some glue right on top. And now let's go
around the top of this with more glue. You want to go on the highest part. Alright now let's add
this piece. So next would be this size. Again I don't want to sit it directly on top of that one.
So we do have these two pieces. Let's try these out. That's a little tall. I have to move it
around and see what works. Now I really like that. Add some more of my glue to the highest part.
And guys I'm using this glue and I have my window open. Make sure that you have proper ventilation
whenever you're using a strong glue like this. I'm just going to turn it around. I really like how
it's coming together. Now let's add more glue. And now let's put this piece on top. I need to see
where the glue needs to go. So the glue is going to have to go right inside. I kind of went overboard
with the glue on this one because of the way these two connect. Yeah this one is going to be a little
tricky. Okay guys so I'm going to let this sit for a while. Then I'm going to come back and put the
other few pieces on. Push this to the side. And for our last two pieces I'm going to go ahead and glue
them together. Last two pieces is this bail and this little bitty. I think this is like a salt cellar.
But I'm going to glue it on top of there. And I'm going to leave that inside the little bead so it
will make that little noise whenever I move my tree. So let's see where it sits. I'm going to put this
right inside the rim and a little bit on top too. Just a little. I'm going to put this on top.
So I'm going to let these two pieces sit up for a while and then come back. And it has been
about an hour off camera. I went ahead and used a level to make sure that it's level.
Okay and I put some tape on it just to hold it. So I'm just going to gently remove my tape.
Like I said I've only let this set up for an hour. Now if you decide to do this at home I would say
let this piece set up for at least 16 to 24 hours because you know you just don't want it to move.
Okay this piece is bonded together pretty good too. So I'm just going to take some glue and put it right
on the base of this part. If you decide to do this more than likely you won't find the pieces
that I have. You just want to use graduating pieces. So now let's put this on top. Oh my god
I love it so much. I had never seen this done before and I absolutely love it. But yeah you
pretty much see what it is. So now all I need to do is just let this set up overnight and then come
back and show it to you again. So now we're going to move on to our second Christmas tree. It's going to be
taller. Hey guys so I'm back with my second set of bowls and candle holders to build my larger
Christmas tree. Let's push those aside. So I have two bowls here. They're not as pretty as I want
them to be. We are going to add bling to this one and that's going to make up for those pieces okay.
We have this this and we have this piece that I didn't realize was broken until I got it home
and because it's broken I'm gonna have to fix that. So let's go ahead and do that first. This
is going to be my base. I have this Dollar Tree mirror and I'm just going to remove the label and
those feet from the Dollar Tree mirror. Now before I put this on there I want to trim the outside
because of the green. The green really shows through. So I'm going to take one row of this
bling and put it around my mirror. Okay so now I have my bling on my mirror and what I'm going
to do is just glue this right on top. My glue starts seeping on the side so I put a bandaid on
it. So let's put some glue on here. It's right in the center. So I'm going to go ahead and clean the
top of the mirror and then come back. Okay guys so I have my mirror clean. Let's go ahead and add
some glue. Next up I'll glue one of these candle holders on top. So now I'll take this bowl and put
it in the center. So I'm going to let that cure for a while and then I come back and move on to
the next. So I let this sit up for about six hours. So now I'm going to glue another candle holder
right on top. Again put the glue on those high points. Put it right in the middle.
Now put glue on top and now take this bowl and put it in the middle. Now I'll put my weight back
on top and I'm going to let this set up for about three hours. Then I'll come back and add two more
pieces. Now it's time to put our next two layers on. Next up I have this bowl and I'm just going
to glue it right on top of here. And I see that I'm going to have to put the glue right inside
the rim. So I'm going to let this sit for about an hour and then I'll come back and add the final
piece to the tree. My final bowl and I'm going to glue it right on top of here and I'm just trying
to see where I need to add the glue. Again I'm going to put it right inside here and now put it
right on top. I always like to spin it a little bit to spread the glue around. Now I'm going to
make sure that it's level. Okay so that's good. Now I'm going to allow this to dry probably for
another three hours and then we'll come back and put our tree topper on and trim it with some
bling. So we have one, two, three, four, five bowls and a large vase. Next up I have some of my diamond
bling that I pick up from Amazon and I went ahead and cut some pieces ahead of time. I just put them
all back in the bag together. So first off we have this layer. I'm just going to take two rows
and put it all the way around. This is going to be a whole lot easier with my lazy Susan. Okay so there
we go. We have that all the way around. So now I'm going to go in here with two rows as well.
Okay so now we have two rows. I think I want to go around this one with one row. It could very
well take two but I'm just going to use one because that's what I have cut. So now I'll do the
same thing here, here. When I get up top I'll come back. I think I need two because of how it connects
to the lower bowl. So I'm going to use two rows. Okay so that's what we have here. Now for this one
up top. Let's see if we need one row or two. Right here we're going to go with one row.
Okay just like that. Now I think I want to take probably two rows and go around here. Because of
the bowl being so plain it just needs some more decoration to it. So this is what the majority,
I guess I can move it up this way. So this is what the majority of the tree looks like. Now I do have
an option to go around here with some more blank and maybe here. So what I'm going to do is decorate
some more off camera and then I'm going to come back in and add the star at the very top. So I'm
going to decorate a little bit more and then come back. So moving right along. I have this star that
I picked up at Hobby Lobby. We take this off. It was only $2.49 and most of the stuff is half off
so I'm sure I only paid $1.25 for it. Now I have to figure out a way for this to sit on top of my
tree. The top of it is not that wide. It's right there but I'm just going to show you here. You
know it's just hard to sit it up there. So I had an idea. I remembered that I purchased a star mold
and I was thinking that I could use my UV resin with some type of mold to get my star to stay on
top. And I remembered that I had the star mold that I picked up from Amazon. And there's different
like designs. I like this design for it. What I'm going to do is take a little bit of my UV resin
and put it at the bottom. Because this mold is not clear it's going to be a little bit harder to
get the UV to set. So I'm just going to set it in layers. I have my lamp so I'm just going to zap it.
All right now I add some more. I'm just going to pop any little bubbles that I might see
and then set it. All right let's check it. And I can see this still looks sticky on this side so
I'm going to zap it a little bit longer. So the next thing I have is one of these small Dollar
Tree cutting boards. And I'm just going to take that down because I need to drill a hole in this.
You see where I'm going with this? I have my drill and I'm comparing this size bit to this. Okay so
I'm just going to take this and drill it. All right once you clean it out you have this. The next thing
I'm going to do is put this down opposite direction enough to hold my star in place.
Now I'm going to take my star. I have my lamp ready to go and I'm going to take some of my
UV resin and drop it right inside of that hole that I created. I'm going to let some of that
drip down. Take my star kind of like dab it down in there. And I'm hoping this works guys.
All right I'm going to take my lamp and just hit it. I should have used my pink lamp for this because
I could put it right there on the spot. That's pretty good. I'm going to go ahead and grab my
pink lamp and come right back. Okay guys so I have my pink lamp and you're able to just zoom it in
on whatever you need to. Okay that seems to be pretty good. So let me just carefully pull this
tape off. Now we have this. Isn't that cute? All right so it is slightly leaning so I need to
probably build up on the base to make sure that it sits straight. So now that we have our star ready
let's go ahead and glue our star onto our tree. Okay so I'm going to take some of my Gorilla Glue
and put it on the base of my star. Because the glass is clear I could have used some UV resin
for this but I want this to be more permanent than that. Okay so let's put some tape on here
to help hold it down. Haha we worked that out didn't we? Oh it's amazing what you can come up with when
you need to. Okay so I'm going to allow this to dry overnight and then I'll come back and let you see
both of my crystal Christmas trees. As promised here's DIY number one and I think she's absolutely
gorgeous. Now it did take me quite a bit of running around to find the pieces to create my trees but it
was so worth it. And here's DIY number two. Our Christmas tree with a little blank. I didn't go
overboard because the idea of the DIY is to show off the beauty of glass. But feel free to add as
much bling to yours as you want to. Now I wouldn't be me if I didn't light it up right. Here's what it
looks like with one set of string lights. Keep in mind the string lights come in different colors
so you can actually select the color that'll match your Christmas decor. I'm so in love
with both of my trees and they will become a regular part of my Christmas display. So thank
you so much Johnny for requesting this DIY. Please comment your thoughts below. Okay everyone this
concludes my video. I hope that you enjoyed it and if you did please leave me a thumbs up.
If you don't have time to comment please leave a heart
or your favorite emoji. And don't forget to share and subscribe if you haven't already.
Okay everyone I'll see you in the next one. Thanks so much for watching.
