In this video, I review two excellent screwdriver storage solutions designed to keep your workspace neat and organized:
1. 65 Holes Screwdriver Storage Rack: https://amzn.to/3TTSmZQ
• Made of high-quality metal with strong bearing capacity.
• Features a Z-type design for adjustable height, making it easy to access and store tools.
• The 65-hole, double-layer design keeps screwdrivers, wire cutters, pliers, and scissors organized.
• Quickly access tools without digging through drawers.
• Bottom platform accommodates screws and small parts, perfect for craftsmen, designers, and advanced RC model enthusiasts.
2. 63 Holes Screwdriver Storage Rack: https://amzn.to/3TVSQia
• Made of durable PS and PP material, resistant to stripping and breaking.
• Three-layer panel design with 63 slots for a variety of tools.
• Keeps your tools organized and easy to access.
• Simple installation with 8 screws securing the four corners.
• Widely applicable for screwdrivers, wire cutters, pliers, scissors, and more.
If you’re tired of cluttered drawers and looking for efficient tool storage, these organizers are perfect for your workshop. Don’t forget to check the links in the description to learn more about these products!
#ScrewdriverStorage #ToolOrganizer #WorkshopTools
We are back with another review and today we're checking out some tool holders sent over by joy
star tools so without further ado let's hop right into this review and let's check out
some of these tool holders and the two different styles that we ended up getting uh straight out
the gate check out their facebook right there that is the qr code if you want to scan that
go check them out um we got a shorter one here which i'll show you this is an acrylic one which
has two levels here which is really nice and then we have a little bit larger metal one which has a
base that allows you to almost angle this any which way that you want basically up to 90 degrees so
which is really nice actually that you know you could have your tools on an angle like that
at the workbench well i got some tools over here what we're gonna do is we're gonna put
them in here and see how they fit and see what what these can kind of be used for um applicationally
straight out the gate um i'm using going to use these for some technical stuff more so maybe my
gun cleaning kits um some of my electronic stuff more so maybe some of my little oscillating
tools little rotary tools i could put some bits in there um 3d printer probably for this maybe
3d printer airbrush um this would probably be great for that i was just basing that off of the
many tiny holes there um so let's check them out let's see what we got and let's go with the
metal one first we'll check this one out we'll kind of see what kind of stuff we can fit in here
so it has some of the holes have a stoppage here which allows it to not go through as you can see
here you can put some rotary tool bits here um little drill bits stuff like that uh precision
screwdrivers some regular screwdrivers you probably fit some cutter cutting tools um you
know more stuff over here cutter wise pliers stuff like that so we'll check that out and then it has
a metal base here to protect the surface from getting marred up from the tips of the devices
you're sticking in there so let's check out i'm gonna grab a little handful of some stuff over
here that i put aside um so we got i got some tweezers some long tweezers um let's see we can
probably probably slide those in the back right there precision screwdriver um probably stick
that right there in the front we got a little multi-purpose wrench here let's see holds it
nice in the back and it actually is resting on the bottom so it's almost kind of made for it
all right let's see we got some screwdrivers i got i brought some screwdrivers out
we got some klein ones nice phillips robertson we got a smaller phillips we could probably put
that in the back we got a long daddy flathead we'll put that in the back and then we got another
another flathead which you could probably put right there cool actually now i'm thinking about
probably even if you wanted to you could probably put the tweezers
upside down right there in the back which is nice so we were talking about some oscillating
little rotary tools so i got a couple things i got a little paddle sander and then i got
some grinding wheel and i got a little polisher so let's see what we got here
so definitely more so drill bit for these on the on the far left or or engraving tools i guess you
could say you could definitely put some of your little rotary bits up top over here with those
maybe those precision screwdrivers could go speaking of precision screwdrivers let's put
some uh let's put some stuff in that back row back there so i got a little precision screwdriver we
could just probably plop that in there nice not crowded at all actually you know what we'll put
some of these maybe in the front because i got something a little bit longer to put in the back
got some extensions here that i use on the regular got a couple more to add to that little
back rack which is nice so lots and lots of tools are fitting in here which is good so far
and then we'll pull out some some pliers let's check out some of those and some of my 3d printer
nippers i got these little nippers from klein that i like the flush cuts um they do have a
tip so i don't want to do something like that um but we could do something like this
you could put them tip down so nobody gets gets nipped by the tip um i got some needle nose let's
see the needle nose do not fit in that one but maybe some nope those don't fit either what about
some six inch cobra necks fit perfect look at that they hold the cobra necks so let's move
these to the back so we got some wire strippers wire cutters
maybe we could put some of the needle nose there as well the multi-use wrench
might have lost its seat at the table but it's okay it's okay uh we got
some nice areas you could put a pencil mechanical pencil i brought some super glue over because i
wanted to see if these little flat slots yeah yeah a whole little super glue tube let me see
what else did i bring over here so speaking of flat flat slots we have a long one here which
i don't really know what you put in this long slot particularly but i do have a ruler
that i put in there it's not going to be slot filling if you would but um it works right
we got a nice little q-tip cleaning tool here um which would go great over here as well if you
don't want to put drill bits in there you can put your your cleaning q-tips there for whatever
you'd be cleaning um let's see here we got a nice little quarter inch we could probably put that
there we got a little stanley screwdriver doesn't look like he's going to get a home the uh the
but i think overall you're able to load this up with a variety of tools a variety of things that
you could use on the regular now again this is just some tools that i brought into this putting
in uh whatever tools that you like you know just because the holes are you know certain sizes or
certain uh shapes doesn't mean that they're you're limited to what you could put in there
like i said the applications for these both of these which we're going to check out in a second
here i'm going to pull the other one up we're going to use use that for a little bit better
they have a little more applicational um strategy to the way that they put the holes and they did
the design of these because you can see with some of these like for example the ruler um you know
doesn't really have a home in something like this but this would be great for like airbrush
3d printing you can pull out some of these tools like this and maybe send them straight up in the
let's see needle nosers you know what i mean straight up in the air uh some of your precision
drivers you can have that for tweaking your 3d printer if you're installing some parts
i'm trying to think if there's other stuff here precision screwdriver definitely
you could probably put that in one of these maybe no maybe one of these it's a little
more focused there we go a little more focused it holds it a little bit better
um your nipping shears now i don't necessarily again want to have those face up over here
just because i don't want to get nipped nipped with the tip when i'm going to blindly grab
something off of the rack so yeah i guess we could probably put this i can't really
the needle nosers aren't really meant i guess for this type of hole setup but it looks like
works out great over here which is really nice and again short small stubby stuff like that
works out great on this but i would probably use this for maybe 3d printing airbrush uh crafting
stuff like that would probably be a good application for this maybe use the metal one for
more tool based um weight i don't know if the acrylic itself is going to be able to handle a
lot of the weight plus it's a lower profile which is really not meant for any of these larger
you know larger tools like this you know i mean there's you can't really see it but there's
there's probably uh that much of the screwdriver dangling off the top of this stand even though
it looks like it's straight it's just because it's a smaller diameter hole you know something
like that you see the the true lean and how much it sticks up so its intended purpose is pretty
much stated in the design here you can even see something small like that little quarter inch
adapter fits in there perfectly you got some some cut off wheels some sanding wheels a little
grinder throw that over there so again smaller parts i would say larger stuff definitely metal
for the tools i would say for weight it would suck to break this acrylic with something you
know large and clunky i think it's more going to be for delicate precision work so joystar
appreciate you for sending this over glad i got to check it out and yeah we'll definitely be using
this with the 3d printers and might do a follow-up who knows we'll see once let me know down in the
comments below what you think of the little tool organizers slash workbench little tool holders
down in the comments below what application would you use for this little acrylic one
more delicate precision one or what about this metal one with the 45 degree angular
approach for tools so let me know down in the comments below hey if you like this video give
a thumbs up want more content like this subscribe for more and have a great rest of your day