Antique Clock Repair course for a beginner how to learn clock repair

Chrono Chronicles
8 followers
8 Video Views·Sep 27, 2025
So, if you turn this little screw here to the right, it will go faster.
If you turn it to the left, it will go slower.
And what it's doing is that it's shortening and lengthening the pendulum.
Now just like clock keys can come in different sizes, and 6 being the most common, the keys
that operate the speed of the clock that are on the other end of some of these keys that
come with the double ended keys do come in different sizes.
You can buy a complete array of keys, like I have here at a clock supplier, and these
are all the different sizes available.
And you can see by the openings that they go from larger to smaller to fit all the different
size openings to adjust the speed of the clock.
Next thing we're going to talk about is some common tools that you may have around the
house if you're a handy person or a hobbyist that you can use to repair clocks.
First thing we need to do is we need to remove the mainspring from the wheel in order to
clean the mainspring.
Because the mainspring we will be cleaning separately from the wheel.
The wheel will go in with the other parts into the cleaning solution.
The mainspring is cleaned separately.
Now in order to do that, we have to use what's called a mainspring winder.
Now there's several different kinds on the market.
This is called the Ollie Baker style.
Turning here, the minute hand comes down to the half hour.
It lifts that little hammer and hits the cup bell right there.
See that?
That hammer, see it's lifting it and it lets it go.
Bam!
It gets your half hour click there.
Here's the count wheel.
Here's our count lever.
There's also a locking cam inside with a lever.
That lever has to drop down into that groove along with the count lever dropping down.
There's two things we're going to need to do before we put together the movement.
That is, on this particular clock, we're going to need to have to tighten these clicks because
the click on this is very loose.
When you're winding the clock, it could very possibly jump the ratchet here and then the
spring would very quickly unwind and break parts in your clock.
Connect the spring behind it.
Now as we wind, see how nicely that fits right in there and it's not loose?
Let's see if it will catch it this time.
Looks like to me that we need to make an adjustment because it's not catching.
Here comes the hour groove and it didn't stop.
Let's examine further what's going on here to see why it's not stopping.
Apply a little bit of oil into the sink.
Just a tiny little drop, just enough to wet it.
We're not trying to fill the oil sink.
Add a little bit of lubrication.
Let's see if we can get a good view here.
Just a little bit on one side and a little bit on the other side.
That should do it.
It gives it a little bit more play.
Take a look at this finish.
Is that something else?
All we did was clean it, put some good quality wax on it, and it's beautiful.
I have removed the strike hammer from the movement and you can see, looking closely
here, that that leather is completely worn down and all you're really having is metal
hitting the gong.
So we need to drill that remaining leather out of there to replace it.
You can see that it looks to be pretty empty.
We got it all cleaned out.
The leather is up inside the hollow punch there.
You can see it in the tip.
So I need to push that out so I can push it out all the way.
There it goes.
All right.
And there's our little piece of leather that's going to go into the hammer.
Definitely a much warmer sound.
