In this video, I’ll show you how to create beautiful hammered flower art using real flowers and leaves. You’ll learn step-by-step how to transfer natural pigments onto watercolor paper, plus see over 10 different flowers and leaves tested so you know which ones print best (and which don’t!). I’ll also share creative ways to turn your flower prints into bookmarks and cards, and how to embellish them with doodle pen designs for extra detail. This is a relaxing and fun DIY craft that brings nature and creativity together—perfect for gifts, journaling, or just enjoying the beauty of flowers in a whole new way! Amazon Paid Links: As an Amazon Associate, I earn from qualifying purchases. This helps support my channel and allows me to keep creating fun content. Thank you!
-hammer -scrap block of wood -flowers & leaves. See list of flowers below -paper towel -blow dryer to dry flowers when removing from paper -Box to spray your art work in -Book mark tassel ideas: Embroidery thread, jute, macrame cord, raffia paper ribbon, ribbon
Tips to Make Prints Last Longer Use acid-free watercolor paper (holds pigments longer). Iron gently after hammering (helps fix pigments). Spray with a UV-resistant clear acrylic spray
BEST FLOWERS FOR HAMMER PRINTING: -Pansies & Violets, Coreopsis, Cosmos, Hibiscus, Geranium, Marigolds, Roses, Dianthus, Black eyed Susans, Echinacea LEAVES & EXTRAS THAT WORK: -Red cabbage leaves, Japanese Maple leaves, Beet Greens, Spinach, Kale FLOWERS TO AVOID: -Daises, Lilies, Tulips, Hydrangeas, Carnations, Orchids, Sunflowers, White Roses LEAVES TO AVOID: Thick waxy leaves (ivy, magnolia, holly), Succulent leaves, Grass blades
Hello, I'm Crafty Patty and thanks for
stopping in today.
It's getting to the end of my summer
where I live and I only have a few
flowers left blooming. So, before
they're totally gone, I really wanted to
try some hammered flower printing.
Now, the technique is very easy, but not
all flowers will release their pigments.
So, I will put a list of what flowers
are the best to try and ones that aren't
so good and won't really give much of an
imprint. Now, keep in mind that today we
are imprinting on just watercolor paper
and pigments from flowers, they just
won't last forever. So depending on the
flowers, depending on the intensity of
the color, depends on the type of flower
and the environment will see how long
your imprints will last. Now, you can
spray
your final piece of artwork with a UV
protective fixitative, and I'll talk
about that a little bit later.
But for a lot of artists who really love
what they've created, they will scan
their artwork or photocopy and then of
course then you've got it for a lot
longer. So let's show you my setup and
let's try some flowers.
[Music]
[Applause]
[Music]
As always, I will leave a full list of
the supplies I'm using in the
description box below this video, as
well as any links to any of the
products.
So, I've got an old scrap piece of wood
from the workshop and a scrap piece of
my watercolor paper cuz I want to try a
few flowers first and just see what we
get.
One of the flowers that they say doesn't
do so well is hydrangeanger. But for
some reason, I just I just can't believe
them because it's such a beautiful
flower. So, I am going to do a test
here. I'm going to take off a couple of
the leaves here. And I will cut off some
of the blossoms from this main part of
the plant. And we're going to give the
hydrangeanger a test because I just have
to I have to know.
Leaves take longer to imprint. So, I'm
going to start with a couple of the
hydrangeanger leaves. And um we're going
to just do a test here. I've placed the
leaves the right side down.
And then over that
I'm going to place
a piece of
paper towel.
And then I'm just going to come in. And
it's not a real pounding with the hammer
like this, but you're tapping.
Now, this is going to cause a lot of
noise. So, I'm going to take off the
sound on this video, but you'll still be
able to watch the process.
Now, you can see already on this first
one that you can see a lot of pigment
coming into the paper towel. So, just
for a test, let's just bring this one up
and let's see what we get.
So, it's imprinted on the paper towel.
has it imprinted on the watercolor paper
a little bit. It's not bad.
So, now that I know that it will imprint
and it is a hydrangeanger. So, I'm going
to try to replace that back down where I
had it. And I'm just going to keep
hammering a little bit more. This paper
towel is getting a little bit on the wet
side. So, I'm just going to find another
spot here
and we'll hammer some more
and see what we get. So, you can start
with a lighter tapping in the beginning
and then later on you can come in. It's
not one of these, but still straight
down a little bit harder tapping.
[Music]
And here's
my second leaf.
I don't mind that at all, but we're
going to try the flower part.
Take off some individual little
flower segments here.
[Music]
Now, to keep these in place, I'm just
going to use some washi tape and just go
right across all of these here.
And I'm using washi tape rather than
scotch tape because washi tape isn't as
sticky
and it won't damage my watercolor paper.
And I go to lift those off.
So, we can maybe go one across here.
Hold that one in place.
[Music]
I'm going to cut off some of these
now that I've got them placed. Some of
these longer stems just so it's easier
to place my paper towel on top.
And let's try the hydrangeas that aren't
supposed to work.
All right, I'll take the sand off again.
[Music]
And there's the final reveal.
Now, this was an experiment with putting
down my leaf first and then I put the
flower on top. So, you can see what
happened is obviously the flower didn't
totally cover the leaf. So, the leaf is
coming through to the background. So, I
think for the next one, I would make
sure that the leaf was totally off to
the side and not in the same position as
the flower. But that's the hydrangeanger
and it's not supposed to work. I don't
know. I think it worked for me.
I'm feeling kind of confident. So, I've
actually cut up a half sheet of a 9 by12
watercolor and then folded this in half.
And that makes the perfect size card.
So, let's try and do a beautiful card.
I'm going to try some salvia.
Geraniums is one of the flowers that is
supposed to work well. So, I'll put some
of those in there.
[Music]
It's always okay to have artwork coming
off the edge of your page.
And I do like things in threes rather
than
even.
So I'm going to put another one down in
there maybe.
[Music]
And let's have some fun again. And
again, I will hammer away here until I
see the
pigment coming up on top. I'm finding
that the pigment's coming up a lot
faster this time with the geranium.
Anyways, I don't want to ruin your ears.
So, I'm going to take off the sand here.
[Music]
Let's see what we've got.
So,
it's definitely left some color behind.
I'm going to take my chance and I'm
going to take off my washi tape and
we'll just see what we've got.
[Music]
So, if some of your plants are sticking,
you can just let it dry
or you can uh get your blow dryer out
and dry it up a little bit.
[Music]
So there's the salvia. It just turned
kind of brown in color, which is fine.
And here's
the geraniums. So the pink deraniums
turned purple, which is still very
pretty.
But you got a pretty good imprint on
those. I feel my composition is just
lacking just slightly. So I'm going to
come in and now I'm going to try some
impatience. So let's try couple
impatience. Again, I'll probably want to
go into threes.
So, let's put one there. Here.
[Music]
in the reveal. There's my three
impatients
and there was there was an orange, a
brighter pink, and not so bright pink.
So, the pinks turned purple and the
orangey one turned pink,
but impatience works really well, I
think.
Now, let's experiment with some leaves.
I have a Japanese maple.
This is a burning bush leaf.
This is the leaf off of the impatience
plant.
This is a leaf off some verbina.
And this is a leaf from the geranium.
[Music]
And here's the reveal for the leaves.
So, the
burning bush leaves I think would take a
lot of hammering, but some did come out.
Japanese maple. Beautiful.
Nothing from the uh verbina
or very little. And that's our geranium.
I think a little bit too wet. And that
was our impatience.
So,
out of these ones,
the burning bush I think will work. You
just have to probably hammer a lot
longer. It's actually quite pretty.
But the Japanese maple is a winner.
I've got a bookmark. And this time I'm
going to try some sweet
aelum. However you want to pronounce
that.
Alison. The same.
[Music]
And here's the feel on those.
I'm actually quite impressed by that.
So, the Alison created this.
I like how those turned out. Very nice.
I'm not 100% sure on the name of this
flowering plant, but I believe it's
another family of the Salvia, so I'm
going with that. If you know anymore,
then please in the comments let me know.
I never know what the Latin name is for
all these. And I'm going to come in with
some million bells or mini patuniius.
[Music]
in the reveal.
It's so exciting to see what we're going
to get.
Oh, that's interesting.
[Music]
Loving how that turned out. Now, I'm
thinking on the patunius I might try
hammering not so hard
and maybe there'll be more definition
rather than just smudged color.
But that's gorgeous.
And next we're going to try
some fuchious.
[Music]
So, on this one, you can't really tell
that they were fuchsia flowers, but I'm
liking the abstractness
of it.
And it's got a little bit smudgy up in
here. So, what I'm going to do is I'm
going to add I've got one more here. So,
I'm going to add another one up in here.
And that will get rid of some of that
smudging.
And there's that one with the added
flower up here.
More abstract, but it's still really
beautiful. So, I'm going to do another
hydrangeanger
just with the flowers and no leaves
behind it. So, we get a more
precise print of just the flowers.
[Music]
hydrangeas that aren't supposed to work.
Well, I don't know about that.
[Music]
I think you should give them a try.
There's the hydrangeas.
And I'm going to do another impatience
for you just so it's more clear
of exactly what we're getting.
Here's
three bookmarks that I've done. And I'm
happy with the composition. And I think
I would just leave those alone without
adding any more embellishments.
And here's three more that I think I
will just leave alone. This one is more
simplified, but I like it. Sometimes
less is more. And these ones might want
some defining. And I'm going to show you
how I do that.
There are a ton of ways for you to
enhance your artwork in your pounded
flowers or whatever you're working on.
One way I like to do it is just to have
fun and do some doodling on it. I like
to use the Pigma Micron pens and I quite
often use the number 03 and 05. And
these are waterproof.
Let's start on this flower down here and
just do something very loose. I'm not
going to try to copy the outline. I'm
just going to make lines. And we're just
going to do a loose
outline on the outside here. And as you
can see, I'm not trying to copy
the design, but just loosely going
around it.
Same thing with coming inside here.
Let's just form a few more little
petals. Let's come in here
and make some petals.
Maybe another one in here,
one in here,
one in here,
and then we can do something funky in
the middle. That's something just a
very, very loose way to do it. If you
want, you can come in and add some more
detail
and come in here and put in some lines
into your stem. And if you just kind of
do a brush kind of just a really light
brushing with your pen, it almost looks
like a pencil,
but it kind of gives you some shading.
I'm not trying to go down too hard. As
you can see, it almost makes it look
like it's a pencil.
And because this is the bottom of the
flower and here's the stem, you might
want to come in here and darken it up a
bit to make it look like shadowing.
There's so many little techniques you
can use. This is just some
you might think it looks like
scribbling, but it's just the effect
that you want to create for your
artwork.
Being that we've used this technique
here, let's come in again and do the
same thing
and just come in
and do kind of some
scribbling kind of lines.
Just scribbling.
Everyone can scribble. That makes it
real easy. Takes the pressure off the
artwork.
and they may be in here. Let's just give
it a center. And again, it doesn't have
to be
realistic. You can just add whatever
features you want. Here, I'm just adding
some circles.
And again, on this one, let's going to
come in and we're going to do some
darker scribbles
just to give it some dimension around
the center.
And then on the sides of your flowers,
you might want to come in and darken up
some of those edges there
just to give it some depth and
dimension.
And that's it. That's as much as I'm
going to do.
And just to have this whole bookmark
look similar, I'm going to do the same
technique on these other flowers.
And I think I will just uh speed this up
a bit
and then we'll get on to some other
techniques.
[Music]
Heat. Heat.
[Music]
Maybe on this one I might choose to come
in and
outline this shape here
and put a whole palm circle. cles inside
here. You can do whatever you want.
You can turn it into a doodle. You can
turn it into something realistic.
I'm just giving you kind of ideas that
you can play with
and you can make it your own art.
[Music]
And if you want to make those look a
little bit more like they're seed pods
or whatever they are, then you can come
in and you can actually go around all
those circles and fill them in.
[Music]
I've added the little circles in each
one of these. And then I think for this
one,
let's just bring down the bottom here.
And this time I'm just going to come in
and make a whole pile of lines
coming back down to that same center
right there.
[Music]
like so. And I'm going to do the same
for this one.
[Music]
Got a little carried away with my lines.
So, I'll just fix those up.
That's that.
And then we just need to bring these
flowers into it somehow. So, I'm just
going to come in and give it a little
bit of a stem.
And let's bring it all the way down and
through
just to make it a little more arty.
[Music]
And let's continue with the lines. So,
I'm just going to come around and make a
real loosey goosey
border.
Let's bring a circle into the middle
here. Another loosey goosey. And we're
just going to draw lines from the
outside and come all the way into the
center all the way around.
[Music]
like so.
Spread the stem. I'm going to just do
this little squiggle all the way down
the stem.
[Music]
Now, I'm just showing you how to
embellish something that you think was a
failure. It didn't have any details, but
you can still use it to make some great
artwork and you've got this beautiful
natural dye in the background. If you've
got a card like this that you're really
happy with, then you don't have to do
any embellishments.
So, I'm going to do the same for this
one as I did up in here. A few little
circles here and there. It just seems to
pull it together a little bit, make it
pop. Either three or five is good.
[Music]
And that one's done.
[Music]
And the other fun way to embellish is to
use a gold pen. This is Faber Castell
pit artist pen. Gold.
So I'm just going to go around the
outline in gold.
[Music]
And I'm going to pop just some little
dots in the middle of the flowers.
[Music]
and a few dots here and there just to
put something in the background.
[Music]
And the gold pen just gives it another
little bit of a pop.
And these are two of the greeting cards
I did. Again, I think we need to add a
little bit of embellishments. maybe some
stems from the flowers and let's see how
we can make these ones pop. Just seem to
be kind of swimming around by
themselves. So, let's try to bring them
all together. So, I'm just going to
loosely outline them.
Again, I'm not looking to be perfect.
[Music]
And this one here down here, it's
obviously a petal over here.
And I'm going to force this to make that
into a center. And I'm just going to
make some white petals over here just to
make it look like it's more of a flower.
Not that uh you know, more of an
abstract flower. That's okay.
[Music]
I'm going to do a double line around the
outside of these. And I'm purposely
trying to make it squiggly. I'm not
trying to make it the same. Squiggles
the better. More squiggles the better.
[Music]
And now let's give it some more
dimension.
Now, this was a patunia, but you can
make it anything you want because you're
the artist.
[Music]
and maybe a few leaves here and there.
Give it a few stems.
Pop in a leaf.
And again, this isn't meant to be
accurate as exactly the flower is. We
started with petunis, but you can turn
it into whatever you want.
[Music]
can give your leaves some veins.
[Music]
And I didn't give this flower a stem, so
I'm going to just sneak one in here.
[Music]
And that one that wasn't great for
imprints has now been embellished with
the pen. And now we've got a nice little
card.
And this one didn't look like much of
anything either. And I just went around
and I outlined the outline of the
flowers. Put some little starburst
centers in. Did a little squiggly line
around these ones.
Now, because we hammered the flowers,
the pigment
can sometimes go through to the back
side. Now, if you want to give these as
gifts or you want to even sell them,
whatever, I would come in with some
acrylic paint and go over the backside
and paint them so they look nice and
clean on the back. And it might take a
couple coats. Once your back sides are
all dry, I like to put them in this box
I keep for spraying with my top coats.
Then I can take this and take it
outside. It's portable. Or make sure
you're in a well ventilated room. I have
two options for you. You can use gloss.
That's my Kryolon is a low odor clear
gloss. or you can do matte. And this
one's by Liquitex, a matte varnish.
So, just for fun, I'm going to do the
pop roll in the Kryon. And that is the
gloss. And just read the directions on
the back of the can. It'll tell you to
shake it for two to three minutes, how
far to hold it away in a steady motion.
So, let's do these ones.
So, this is dry to the touch in 20
minutes and you can handle it in an
hour. But because I'm impatient, I'm
going to take these out and get these
sprayed with the Liquitex and then we'll
be all done. The Liquitex matte varnish
does say it's for acrylic paint only.
This is pigments, so I don't know. So,
I'm going to do a test just on one first
and see what we get.
It hasn't dried yet. I just sprayed it,
but it looks like it'll be just fine.
[Music]
I'm going to let these dry for about an
hour and then I'll let you know what I
think about each one of these.
And here they are after they've all
dried. This row here, I used the Kryon
clear gloss.
And I don't know if you can see it on
camera, but you can see a little bit of
a shine in there. It's not real glossy,
but uh that has protected those ones.
And this one here, this whole row we did
with the Liquitex matte varnish.
I'm quite happy with this one. I can
actually almost feel
a nice light coating on there and I have
a lot of confidence that this is well
protected. So, I would say that this
would be my first choice, but it it's a
little bit of a superior product, I
believe, to the Kryon,
but both would work. So, there you go.
And your choice of what you want to add
for a little tassel. You can use
embroidery thread. This is jute. This is
macra cord. This is raphia paper. So you
can choose whatever you want.
And to get for instance a mac cord
through the little hole, you can always
use a small crochet hook, one that will
fit through the hole of your bookmark.
Just hook it on and then get that to
pass through to the back side.
And then once you're through,
just tuck those two ends into your loop.
Pull it up.
Just unravel them.
And you'll have a nice little tassel.
There you go.
Well, that was a lot of fun and I really
enjoyed the process. And if you need to
get some the little yayya out and get
that hammer out and start pounding and
then you get to end up with some
beautiful artwork and I end up making a
lot of bookmarks and three greeting
cards out of it. Now, I did mention in
the beginning of the video that the
pigment from the hammered flowers do not
last forever. So, I will post some
information on a variety of flowers and
how long they will last in the
description box below this video. I'll
also give you a list of the best flowers
to try and ones that just don't work
quite as well. Even though they say the
hydrangeanger is not the best, I was
happy with the hydrangeanger
uh that's right in the middle here, this
one here.
But I was happy with that one in the
end. It is really exciting to see that
image appear on the paper after you've
hammered the flower. So, give it a try.
It's It's really quite fun. Don't And
don't worry about that you're damaging
the flower. I mean, this is the end of
the season and they're pretty much ready
to go. So, whether they die on the the
plant or whether I have some everlasting
well, not everlasting, but have some
artwork out of it before they are gone,
then why not? So, if you enjoyed the
video, give me a thumbs up and don't
forget to subscribe and turn on your
notification bell for the next video cuz
you never know what Craft Patty is up to
next. Until then, bye-bye.
[Music]