Add a little sparkle to your holiday season with these gorgeous beaded Kumihimo bracelets!
In this full step-by-step tutorial, I’ll show you how to make TWO beautiful Japanese braided bracelets using both 8-cord and 12-cord Kumihimo techniques.
We’ll create a wider, dazzling bracelet loaded with beautiful beads and a smaller, more delicate version that’s perfect for a child. Together, they make a lovely matching mother-and-daughter set or thoughtful handmade Christmas gifts!
What makes this tutorial special?
I’ll share my technique for incorporating beads using a finer nylon cord while still using wider satin rattail cord to create a beautiful, full braid. This allows you to add plenty of sparkle without sacrificing the lovely texture and fullness of your bracelet.
In this tutorial, you’ll learn:
● How to set up your Kumihimo disk for 8 and 12 cords ● How to create two different bracelet sizes ● How to incorporate beads into your braiding ● Tip for creating needle thin ends to add beads ● How to combine fine nylon cord with wider satin rattail cord ● Tips for creating beautiful, even braids ● How to finish your bracelets with decorative end caps and clasps
These festive bracelets are perfect for Christmas, special occasions, or anytime you want to add a little glamour to your handmade jewelry!
If you’re new to Kumihimo, be sure to check out my beginner bracelet tutorial, where I introduce the basics of this beautiful Japanese braiding technique.
I hope you’ll enjoy creating these sparkling bracelets as much as I enjoyed making them!
If you enjoy learning new crafts and creative techniques, please give this video a thumbs up and subscribe to Crafty Patti for more step-by-step tutorials.
Happy crafting! Crafty Patti ❤️
This video may contain affiliate links. If you purchase through these links, I may earn a small commission at no extra cost to you. As an amazon associate, I earn from qualifying purchases. Thank you for your support!
To Make small and large bracelet 5yds of 2mm red cord 5 yds of 2mm gold cord 5 yds 0.8 black cord About 80 4mm Goldtone Beads About 80 6/0 Czech Seed Beads
Hello, I'm Crafty Panty and thanks for stopping by.
I made this kumihimo bracelet on my last video,
a nice easy one, and I like these colors, the teals.
That's just me. You can make them in any
colors of course, but I mentioned that I wanted
to make one with more bling for the holidays.
I wanted to use red
Because I'm going to be giving this to my daughter,
actually, the bracelet, and she likes gold.
and gold.
I tend to like silver.
So depending on your preferences,
you can make them in any color you want.
And now these beads I wanted to use have very small openings.
So I'm choosing to put in some 0.8 millimeter nylon cords
so I can pull the beads.
Now you can look up lots of videos on youtube on how to add beads.
This is just my way. I choose
the easiest way. I tend to not follow the rules.
I just do what works for me. So I will be taking
a step-by-step on how to make this beautiful beaded bracelet.
And I'll have this full supply
list so you don't have to worry about writing anything down.
And the links in the description
See you in the description box below this video, as always.
So come along with me and let's make this kumi female bracelet with me.
The cord is too big for your bead.
Easiest way, if it's a nylon cord
of course, then you can
melt the end of it with a lighter
and draw it across a piece of parchment paper
and it forms
a perfect little needle for you.
Just cut off the excess and you've got the perfect needle.
I have some satin rattail cord here.
This is two millimeter. I've cut four lengths of red
at 28 inches and four lengths of gold 28 inches.
I have some black nylon. I believe this is 0.8
millimeter and I cut four pieces at 33 inches.
Wrap them all together at one end. It doesn't
have to be perfectly even
because we're going to be cutting this off anyways and all we're
All we're going to do is form a simple knot.
All those cords inside the loop there
and we're going to leave about approximately
four inches of tail on the end
and just pull all these to tighten it up.
I have a 32 slot disc.
Let's go ahead and place the knot through the center hole.
I'm just holding my fingers above
the knot just so it gives me more security.
I go to place my cords. Now on my disc I've got
two lines here this is going to make it easy
for me to explain where i'm going to place my
black cords so i'm going to place one on the left of the nine
and one on the right of the nine and
again on this side i'm going to place one
on the left 25 sorry on the left of 25 one on the right
of 25.
And now it doesn't have to work out perfectly.
If it's four spaces or five spaces in between,
it doesn't really matter. And let's count it out.
So we've got one, two, three, four, five.
So let's place the gold cord on the left and one on the right.
Here's one, two, three, four, five.
Let's place one on the left of four and on the right of four.
We've got one, two, three, four,
Which is fine.
Let's come down to the bottom here, same thing,
1, 2, 3, 4, 5, let's go left and right
of number 14, and 1, 2, 3, 4, 5,
let's go left and right of number 19, and we've got
1, 2, 3, 4, 5 left.
So close enough, it does not have to be perfect by any means.
So now what we're going to do is just make sure
that our braid is kind of sitting more
centered and pulling it up.
From behind the spine to lock it in so it's more closer to the middle
and then I can just
pull down on these cords just to help sit more in the middle.
Now you may have noticed that we've got
two millimeter cording and we've got 0.8 millimeter cording.
The reason I did that is I'm going to have
a thicker braid with using the thicker cording.
from the rat tail and these ones from the nylon cording is thin
which allows me to add beads
and that's what I've done here with the bobbins.
So I'll show you that. I've already added three
of them and I'll do one with you.
Now these little felt bead trays are really handy
if you're going to do any beading work
as it's got a little ledge so it holds all
the beads in here so it's not going to go
all over the place and it gives you
and here you can count them out if you want to
or decide on your pattern.
These ones here are four millimeter from Bead Landing. They
actually come in a strung package
but you can just buy seed beads as well. Seed beads 6-0.
And I just wanted to go for some pretty gold
because I'm making them for the holiday season.
These actually I bought from Michael's
but you can buy them online as well.
And now I just showed you how to get
that nice needle-like end on the nylon cord.
So now we can thread our beads easier.
As we pick up our beads by finding the hole and slipping them on.
And I've decided I'm going to do 20 beads for each black cord.
So I will carry on and put these on and I will get back
to you after I've threaded all my beads.
Now just as a second precaution I
do like to tie just one little half
a knot on the end of my cord
and just in case this bobbin comes off then I don't lose all my beads.
And the other reason I like to tie that little bit of a knot because it
holds on the little ridge inside the bobbin here
and it helps to hold it tighter.
So then we're just going to wrap up our bobbin and we're going to come
to about four or five inches away from our disc.
Close up our bobbin and we're ready to go.
And anytime you want more length you just pull it out like this
and you've got more length.
And now I like to use a weight to hook on to the bottom here.
This has got a little clip.
Now, this weight happens to be pretty heavy duty.
It's what I've got right now,
but they do come with half the size of this weight,
which is probably better.
But this is what I've got, so I'm going to use it.
And as you can see, it just helps to pull the cords down
into the middle hole,
and it will create nice, even tension
while you're doing your braiding.
Now you can choose to add bobbins to every one of your strands.
I'm not going to in this case
because the this cording this rat tail is nice and kind of slippery
and it slides through and I don't find it knots up
as much as other types of cording.
So I'm going to choose not to use the bobbins for the rest of this.
Now I'm going to be choosing to
use a cord ending like this one to finish off
my ends for my bracelet just like this one.
So I don't want any beads inside here.
So I'm going to just do a little bit of braiding,
maybe just a little more than a quarter inch,
just about the depth is maybe a bit more,
because I can always cut it off,
Now of course I've got to try to keep this in camera for you
and then we'll start adding our beads.
but I want to make sure that I
don't have my weight sitting on the table.
That would defeat the purpose of having the weight
for the even tension.
So I'm going to be trying to work off the edge of my table here so it's
not going to be the prettiest sight for you
because you're only see the legs or whatever
you're going to see down there and then we will get going here.
Okay so it doesn't really matter
I don't know where you start, but let's just start here.
So for the braiding, you're always going to come from the right side
and you're going to match it up with the pair opposite.
So then you're going to go right to right
and then you're going to go left to left.
You can see the arrows here.
That means we're going to turn counterclockwise.
So let's do that again.
Right to right, left to left.
We're going to do the same thing
with our black cords.
Right to right, left. Keep going.
It's basically all you're gonna do
until we've reached that little tiny bit of braiding
so it will sit nicely into our end cap.
Now, as I was talking there, I almost forgot where I was.
So what you need to do is bring three strands down
and then you know exactly where you're at.
You can pop it down, go away, do something else,
come back to it.
Then you know that if you've got three here
and only one here,
then you know that this one has to come up.
to join that one to match it up now i've gone further than i need
to but i wanted to give you
a good idea of what it looks like
and you can see how we're getting a little bit of a spiral of the
gold the red and the black
and i know where i've stopped here about three here so i need
to bring this one up to there now we're going
to start adding those beads so let's bring the
The first one.
We're going to let a bead drop down.
And that bead needs to tuck down underneath those cords to grab.
So then we're putting it back in
the same position as long as that bead is tucked underneath.
Let's grab this black one, let it be
dropped down. Again, it's got to go underneath those cords
and back up into that left position.
There it is there.
Now we just carry on with our other cords that have no beads.
And here we are again, where we're going to add more beads again.
So we know it's always the beads on our black cords.
So drop down a bead, make sure it's underneath,
bring it to the right of those cords.
Let's bring up the next black cord, let the bead drop in,
poke it into underneath that gold cord, and back to the left position.
Okay, carry on.
It's basically
the whole sequence
until you've got it.
To the size that you want
and here's what we're creating.
You've got a gold and a red spiral
with the bead spiraling around the main cords
and the beads are accent cords wrapping around.
Isn't that pretty? Now before you get too far on your beautiful braid
you need to work out how long you want to make it.
So I'm going to use my wrist as an example.
Now, if I have my bracelet at, say,
seven inches right there, I've got a little bit
of give here, and I might want to have it
so it's hanging down just a little bit more.
So I think I'm going to allow for the total bracelet length,
including the end caps, to
be about seven and a quarter inches.
I think that would be good.
I also want to allow for my closure and end caps.
So this time I'm going to be using the magnetic.
um closure with the two lobster claws
which attach to my cord ends cord end caps so all that together
makes two and a half inches so i have to allow
for that now i have about half an inch of braid with no
bead so i want to match that for the other side
so half an inch and half an inch that's another inch
So half an inch of no beads on each end so minus another inch.
So that's going to give me now
three and three quarters inches of my beading.
And there we have it. I've just popped my measuring
tape up to that first bead and measuring down
and we've got pretty close to three and three quarters
inches. Now we're going to just do the remainder
of the braiding for half an inch with no beads.
So that's where I finished off and now we're just bringing them up
and just leave those beads behind
and you can just undo the bobbin a little bit
so it doesn't get in the way. No bead. Same with this
one. You can just unravel that a bit, bring that up,
no bead and carry on until you've got that
half an inch of braiding with no beads.
I did a little bit more than
my half an inch just so it's
It's easier to tie it off up here.
And I'm just going to take off my bobbins now,
just so it's easier to work with.
And normally I would probably tie it off using the black,
but I'm going to use the white just so you can see what I'm doing.
And I'm just going to poke it down through the top here,
just so I can get in there
and bring it around.
I just wanted to make sure it
around my cording.
And I'm just going to bring these two ends back up to the front.
Now, just a simple knot.
Close to the end of all that braiding
and do a quite tight knot as tight as you can make it.
Just one for now, just to hold those cords
in place till we take it off our disc.
Let's take all our cords off
and pull it through.
And now where we've tied that off,
I'm going to just flip it over to the other side.
And I'm going to tie a knot again on this side.
And I can get in there better.
And I'm going to make that as tight as I can.
Really tight.
Tie it off.
And then I'm just going to wrap it twice and then tie another knot.
Really tight.
Now that I've secured that end,
and before I untie my knot on this end, let's do the same thing.
Now we can untie our knot.
And just doing another check on my final measurement
from my tie-off to the tie-off.
I've got four and three-quarter inches.
How about that, eh?
And now before I cut off my ends,
I'm going to come in with some super glue.
And that is right
on my wound up white piece of cording.
I'm going to go just past it
and into the cording.
I want to make sure that's good and strong.
And now, as you know, super glue almost dries instantly.
You do not want to get your fingers on it.
Otherwise, your fingers will be glued.
I'm just taking one of my cord ends here
and looking at the depth of this so just as a guide
right up to my thumbnail
so that gives you a really good idea of where you're going to cut off
your ends because you want to make sure you cover up
your cording. Now to get those cord ends to be
a little bit thinner you might have to come in with a pair of pliers
and just squish it down
Just a little bit.
Because the super glue makes it really stiff.
And then give it a test before you put the glue in.
Make sure that that's going to go in.
Just with a little wiggle
to make sure it goes past that white.
There you go.
That's a perfect fit.
Look at that.
Okay.
So let's take that off and glue it in place.
And as you know,
super glue dries really, really fast.
So you have to be on the fast side
when you're putting the glue inside here.
You want to put it along the edges
and into the bottom.
Quickly grab
that braid
and get it in there.
I'd have to do a little twisting.
Give it a push in there.
Make sure it's really
in and hold.
And do exactly the same to your other side.
Now I did not allow for the actual thickness of the bulk and the beads.
I only allowed for it to go around my wrist.
So therefore...
It's too tight for me.
This is how you fix it and this is how you extend it.
In between the magnetic closure
and the lobster claw we have one jump ring.
So we're going to open that up
and we're going to add additional jump rings
to lengthen my bracelet and using two sets
of pliers holding one on the left one on the right
we're just going to open up that jump ring like so.
Now I'm going to
This jump ring is slightly bigger than the ones I already have.
So I want the smaller jump rings to add to the
the lobster claw. So I'm going to take that one
off. Let's just sit that one down for a minute.
Let's grab one of my smaller jump rings.
We're going to put that on to our
lobster claw and go.
While I'm at it I'm going to add
a second one. Now we can close up our jump ring again
Making sure it's a good tight
Match. Good fit. Now we can add that second jump ring back onto
our magnet and then close this up.
We've now got an extension.
So I ended up adding two additional
jump rings on both sides and that's
a much better fit for me but ideally I would have liked
to have these cord ends sitting a little bit
So I'm going to make another one off camera.
I'm going to make the beading come a little bit further
and I'll probably add all together
an additional inch to get this finding
to close up better on the back of my wrist.
So those are just things to watch for and as I said I did
not accommodate for the bulkiness
of the bracelet but I do love it.
And one thing I did show on my first bracelet tutorial is I forgot
What I forgot to tell you is after you finish, just give it a tug.
And when you pull it out it will actually give it more length
and it just evens it out as well.
And here's my second bracelet finished
and as you can see I brought the beads further down closer to
the ends and I did more beading.
And this one sits much nicer on my wrist.
And here's what my second one looks like. Either bring it up on the
arm a little bit more. These are sitting much better on my wrist.
Or bring it down if you want it to hang it a little bit further down.
You can make it the size that works best for you.
The other thing I changed too, I don't know if you noticed,
but this one has got all the same bead.
Whereas this one, I've got the little round bead
as well as the other bead in here.
So I think it might look a little better
to keep it uniform with all the same bead.
So that's just my opinion.
They're both beautiful.
So let's try this for a smaller braid.
So I've got eight cords in total.
These are two mils, just like my other bracelet,
and I've got the 0.8 mil
because I can get the beads on those ones.
I'm gonna do exactly the same beading technique,
and let's see what we get.
So let's start on the eight and nine,
and same thing, we're gonna go bottom,
or sorry, top right to bottom right,
bottom left to top left.
Rotate the bottom
and bottom to top.
We're not putting any beads in right now,
just until I get a little bit more braided.
And I've just done a few rotations.
I'm back to the same pattern that I started with.
And I've got a little bit of braiding done below.
So I've got something to put my end cap into without the beads.
And now we're just going to go around.
And this time we'll incorporate the beads.
Same thing, top to bottom, left to left.
Right to bottom,
this is where we're going to add our first bead.
And here's our first one.
So we're going to tuck it in as always and bring that up.
First bead,
make sure that's tucked under.
So we've done this one, this one.
And let's go around again until we get
to our next black cord.
It's here again.
Let's drop in one bead
and then bring it down
and finish our pattern.
Do every time we hit a black one.
Make sure you keep your bead at the middle,
just give it a little adjustment if you need
to.
And this time on this side we've got two blacks.
That's okay.
We're going to add two black beads.
Putting in that black bead,
making it hook underneath
the cording, make sure you're in
the middle.
And that's all there is to it.
And if you don't know what you're going to get, that's okay.
I don't actually know what I'm going to get on this one.
I'm just trying to make a thinner bracelet for my granddaughter.
And if it works, that's great.
Because it's really nice to experiment,
not follow everybody else's patterns, because
you might come up with something really cool.
So that's what I'm going to keep doing.
Adjusting into the middle,
dropping those beads in every time I get to a black cord,
and I'll show you in a bit what we got.
And here I've used up all my beads,
so I'm going to continue to braid, just so I've got
a little bit of plain braid on the end for my end cap.
And I'm gonna stop there and just tie a cord.
Around the base down here just like we've done
before. And being that the braid isn't as thick,
I'm going to go down one size
on the end cap and see how
that works. Now apparently
a child's wrist
can be anywhere between four and a half and five and a half.
And remember that I miscalculated
on the one for myself because the bulkiness of this made it come out.
Further so instead of measuring weight
to your wrist you have to measure kind of away from your
wrist. So I'm hoping that this is going to be a good fit for her.
Just in case she needs it longer
I've added an extender uh let's see one two three four five four loops
so then she can make it a
bit longer if necessary and if she doesn't need it
then she can still hook in to the main end cap.
I think you can kind of see my see them
on my fingers how much stained here.
The one with eight cords is compared to the 12 cords
and I added less beads so I think she's
going to be quite thrilled that she's got
a bracelet very similar to Mummy's and I also
gave her the little heart end caps and the little heart magnet closure.
Mom and child bracelets
with lots of bling for the holidays.
Well there we go we've all got
a beautiful bracelet.
For the holidays, one for me, one for my daughter,
and one for my granddaughter.
Isn't that adorable? She's gonna love it.
I know she'll love it because she likes to be just like
mommy. Now, using my little trick to make
that nice little needle on the end of this cord,
I was able to thread on all the beads I wanted
to put in that beautiful bling and shiny bracelet.
So I'm happy with the way they turned out.
So if you want to use a thicker cord,
by all means bringing in that thinner cord to add your beads
works beautifully, as you can see.
And it will work up a lot faster than the thinner cords
like this one, it takes no time at all to make these.
So I hope you go out and get
your supplies, make some beautiful bracelets for gifts,
for your family, for yourself,
And have some bling for the holidays.
Bye for now.