How to make silicone molds using 100% silicone and cornstarch - Video 2

Crafty Patti
148 followers
113 Video Views·Dec 11, 2022
Video 2 of this series.
In this video I show you how to make silicone and cornstarch molds.
I also do a comparison using the EASY MOLD product compared to making your own silicone cornstarch molds.
So today I've purchased silicone plus because they do say that it's low odor. I'm also going
to work outside today because it's just healthier. So we're going to give this a shot to make our
molds today. I'm using this as a comparison to some molds I made the other day using the
Easy Mold product. I did like this, no odor, healthy, no problems with that and it produced
some pretty nice molds. So I made two seashell molds and I was quite happy with the results.
So today let's try using the cornstarch and the silicone method and let's see how we do.
So your supplies needed for today to make the molds will be trays or any surface that you want
to work on. I actually took freezer paper and lined this and then just attached it with some painters
tape. Then you'll be needing a caulking gun and use 100% silicone and I chose to use the silicone
plus because there's a little less odor to that and I found that did work quite well.
There was definitely some odor but not as much as the regular silicone. Next you'll also need
a utility knife and that of course is to take the end off your caulking tube and then you'll
need a puncturing tool to actually puncture the membrane inside here.
The other items of course are your cornstarch and some baby oil and your shells of choice
to make the molds. And one last item I forgot to add onto the supply list was your putty knife.
The supply one that's got some good flexibility. Next step you'll need to do is you'll need to
cut the end off your silicone tube. I did so by using a knife.
So the next thing you need to do with this particular brand DAP,
there is a seal there so you must break that seal. So I've got a little puncture tool here
and I'm going to just break the seal. Next you want to put it into your caulking gun.
Just slide that right in there and then just press it and you'll be ready to go.
So this is just some leftover cornstarch I had from another project. I'm just going to use it up
and apply some of the silicone and put enough in that you feel that it will be enough to
make a good size mold for your project. Add a little bit more cornstarch on the top of your
silicone so I can mix this in. Once you've got a little bit of the cornstarch mixed in,
you can add a very small amount of baby oil, just a few drops, and now mix that in.
And I'm getting a little bit of an odor from this but not bad at all. And of course I'm outside too
so that really helps. Once you can get a consistency that starts to hold together,
you can then try using your hands and knead it like pastry. You pick it up and roll it in your
hand. If you feel any stickiness at this point in time then you know that you have to add a little
bit more cornstarch. The heat of your hands will help to make it nice and smooth. I'm just going
to clean the surface of my working area here, taking my shell and just push that into the
middle of the ball. So we'll let that sit for about 30 minutes and we'll come back and see
how it's sitting in. This one here does feel nice and rubbery, that's kind of how you want it to
feel. So I think I'm safe to actually take the shell out of this one and let's see what we've
got. I think that's made a pretty nice imprint. I'm quite happy with that one.
