Sound - How to Make a Harmonica

Terrific Physics
40 followers
3 Video Views·Sep 22, 2025
Hi I'm Jared with Fun Science Demos. I picked up this cheap plastic harmonica from the dollar store
and it makes some interesting sounds and that's really what the topic of our video is today,
sound. There's a lot of science in sound. Now for something to make a sound we need two things. We
need something to vibrate and move quickly and we need air that allows those vibrations to travel.
So we've zoomed in on our harmonica so we can pop this apart and see if we can figure out
what is vibrating here to cause the sound. There we go. This little insert pops out and now I can
see I have these little slots and these little plastic reeds. What happens is I blow through the
harmonica the reeds vibrate and it also causes the air to vibrate as it goes through these slots.
That's what's making my sound. If I blow through this quickly I think I can even get it to make
a sound without the case around it. Here we go. Hear that? My breath is causing these plastic reeds to
vibrate really quickly and I wonder if we can make our own version of the harmonica. We just need
something to vibrate so let's get some materials and get started. We're going to try and make our
harmonica using nothing but rubber bands. They're going to do the vibrating and we need something to
stretch those rubber bands and I think we're going to try rulers or popsicle sticks. So let's start
with the popsicle sticks. Now all I'm going to do is stretch my rubber band and I have different
size rubber bands that I can try to see if I actually get a different sound. I'm going to
stretch it over my popsicle stick. You'll notice that the rubber band is really close to the
popsicle stick. There's no space so I don't know if the air will actually travel through.
I can kind of make a sound but I wonder if we sandwich another popsicle stick over top
and put something between them to give us some space which would really allow that rubber band
to vibrate. So what are we going to use? Well we could try using a toothpick or a straw or even a
paper clip and see if that will give us some space to allow that that rubber band to vibrate. So we
have our rubber band stretched across our popsicle stick. We need something to create some separation
so I could use a toothpick and you can see I get a little bit of a space between the rubber band and
popsicle stick. I could use a straw, just a section of straw. The nice thing about the straw
is I actually can crush it down flatter but we're going to try using a paper clip. They slide under
really nicely and I can actually slide it across my rubber band quite easily. So we'll need one
for each side and that gives us a nice little gap between the popsicle stick and rubber band.
So we have our popsicle stick, our rubber band, our paper clips. Let's use one more popsicle stick
to kind of create a nice little hard casing for our harmonica, much like the little plastic outer
casing. I'm just going to pinch it between my fingers and see if I can get this thing to vibrate
and make a sound. Here we go. Yes! I think we have a harmonica. We're going to actually see if we can
watch and see this rubber band vibrating. We'll zoom in and see if we can see it move. So we've
zoomed in super tight on my lips and our harmonica. Just watch the rubber band and see if it vibrates.
Now the neat thing about this harmonica is we can change how it sounds or the pitch of
how it sounds by sliding our paper clips. So listen to this and see if you can hear
the difference. Here we go. This is with them spread apart.
Listen to that sound. Now I'm going to slide them in closer together. See if you can hear a change.
It sounds like that pitch, that sound went higher when I slid them closer together.
There we go. Now that pitch or sound depends on how quickly the rubber band vibrates.
Now if I wanted to seal this up and make it a little more permanent, I need to attach the ends.
To do that I could use twist ties, I could use rubber bands, I could tie it with string, but I'm
going to use a little binder clip. It holds it nicely and then it actually makes it look, I think,
like a little harmonica. I have little holders. Now what's cool about this is we can modify it.
We can try double stacking, triple stacking, and getting three rubber bands. We could try using
something else other than a rubber band. What happens if we use wax paper, or computer paper,
or tissue paper, or a tissue, or aluminum foil? All of those are great things you could try
on your own and see what happens. If you don't have any of these materials and wanted to make
your own version of a harmonica, all you really need is a leaf or a piece of grass and your hands.
Check this out. When I put my two thumbs together, there's a space in between them,
and if I can pinch or sandwich something like a leaf in between my thumbs and then blow through
my thumbs, I should be able to get that leaf to vibrate and make a sound. Let's check this out.
That's definitely a sound that might annoy your teachers or parents, so be careful, but play around
with it. That piece of grass or that leaf is vibrating and it definitely makes a sound. So
whether you're playing a musical instrument or trying to build your own, there's a lot of science
in sound. If you want to learn more about sound, check out our YouTube channel, Fun Science Demos.
Science is so cool, especially when it makes a sound. Thanks for watching.
