How to Make a Sound?

Terrific Physics
38 followers
Sep 27, 2025
Hi, I am Jared with Fun Science Demos. In a previous video, we used balloons and a pipe
to explore sound energy. Well, in the world of COVID-19, these gloves are everywhere. They are
made of different materials. Some are made of latex, some are made of vinyl, some are made
of nitrile. We had an idea. We wanted to use these gloves to see if we could explore sound energy and
make a musical instrument. This is the instrument we are going to try to make. And remember,
if something is going to make a sound, something needs to be vibrating. So we are going to zoom
in on our instrument and see if you can figure out or see what is doing the vibrating as I blow
into the straw. Here we go. Here at Fun Science Demos, we are calling this the COVID kazoo,
because something is vibrating like a kazoo. We are going to be using safety gloves,
and we can control where our breath is going. Instead of broadcasting it across the room,
we are going to direct everything back to our body and control where our breath is going. Now,
in this case, we used the balloon, but you get a different sound when you use some of
these safety gloves. Take a listen. You will notice I can control the pitch by what I do with
this piece of paper. If I press it up or bring it down, it changes the pitch. Now, to make our COVID
kazoo, we need a few basic materials. We need a straw. We need a water bottle, a safety glove,
a rubber band, and then just a regular piece of paper. We found that the stiffer the piece of
paper, the better. We are using this oak tag or oak stock paper that is a little sturdier,
but regular paper works. You might just need to put three pieces of paper instead of one.
That is the cool part. You can design it and try it and re-engineer if you need to.
So to get started, I am going to take the cap off the bottle so no air is trapped inside,
and I am going to cut the bottom of the bottle off. Now, you will look at the bottle, and a lot
of times you will find these bottles have lines that you can follow to help you cut.
So I am going to pinch the bottle just to get started. Make a beginning cut.
Now follow that line all around the bottom of the bottle. You want to try and keep your cut as
neat as possible because the glove is going to go on the bottom of this, and if there are any
sharp edges, that could tear the glove. In fact, we might want to wrap some tape around this edge
just to make it sturdier and to clean up some of those edges. So we have taped our bottom edge
just so it does not tear our glove. It makes it a little sturdier. Now we need to put a hole here
so the straw can go into the side of my bottle. To do that, the easiest way we have found is you
use a little safety pin, a push pin. Push it through the bottle. Wiggle it around. Now there
is no way a straw is going to fit in this tiny hole, so I have to make it bigger. How do I do
that? Use a pencil tip. The pencil is tapered. If I twist and push, I can slowly make that hole
bigger. Now you do not want to make this hole so big that the straw fits in and it can wiggle
around and air can escape. We want it pretty much to be airtight. Now if that straw does not fit
through, I can take a scissors, snip the end of the straw, and that allows me to change the diameter
of the tip of the straw, and it should slide in and out. I am good to go. So now it is time to put
our safety glove onto our bottle. They are usually stretchy enough to slide them on. You want to have
it down far enough so that I can wrap a rubber band around here so it keeps it in place. Then
usually what I will do is I will stretch the bottom palm part of the glove over that end so I
get a pretty tight stretch. Now I am ready for my rubber band. Now if you are using a flimsier
bottle, you might find that bottle starts to collapse when you attach the rubber band, so you
might have to go back and make that rim stronger. I think we are ready, but we need a piece of paper
to go up inside because when I start to blow, nothing is making a sound. I have to get
something to vibrate. Well this piece of paper is going to allow those vibrations to start. So now I
need to roll up this piece of paper. I am going to use this pencil to help me get started by pinching
it onto the edge. I am going to roll it pretty tight and what is going to happen as I put it into
the bottle, that paper will unravel and unroll and it should form a nice seal. Roll this up, pencil
drops out. It is small enough to go up inside my bottle and now it unravels. It is pretty sturdy.
Let us test it out.
And I am all ready to annoy some adults. Now the cool part about our COVID Gazoo is I can get
different pitches and different sounds by sliding this paper back and forth, pushing it up, pulling
it back. Let us see if we can get some different pitches and sounds. Here we go. Low pitch.
That is a nice low pitch.
Now there are some other things that we can change about this COVID Gazoo and that would be the
length of this piece of paper. We can make it shorter, we can make it longer and I wonder if
that would actually change the sound. So let us try that. We are going to try cutting this shorter,
see if you can hear a difference in the sound.
Did you hear a difference in the sound?
So as I cut the paper shorter, the pitch seemed to go higher and through science we have discovered
that sound travels through the air in waves and when the pitch is high, the waves are close
together and when the pitch is lower, the waves are spread apart. Now we can use other materials
to try to build different COVID Gazoos. We could try different water bottles or different bottles
completely. We could try different materials for the top. We could try different materials
for going inside. Let us try and look at some of the different designs we came up with.
So here are some different designs we came up with at Fun Science Demos. You will notice this
one is very similar except we used a longer, bigger water bottle and we found when this
water bottle is bigger, it is kind of easier just to remove the straw. We have a little hole in the
straw to get a different sound here. And all I am doing is just spinning and twisting and pulling that
little piece of paper, very tiny movements to get different sound. This design, we cut the bottom
off of two water bottles and joined them together and instead of a piece of paper, we decided to try
a straw. Now because the straw is so small, I kept the cap on this and used the push pin to poke a
hole, used the pencil to make the hole bigger and then slid my straw through. You can see the straw
poking up into that membrane. This was really challenging to make a sound. We are going to see
if we can get it to make a sound. You might build it and it might not work. That means you have to
go back and redesign and change some things to make them better. So here we go. You can hear
that is a much softer sound. For our final design, we really went out of the box. We decided to use
a mustard container and why we picked that is because this particular mustard container has
a seal down at the bottom that looked like it was perfect for a straw. And sure enough, that straw
fits in perfectly. We cut the bottom of the bottle off, we stretch the glove across it and we have a
hole in the side. So this allows us to blow air in. The air wants to escape but it is sealed down here
so it has to push past the straw and the membrane causing it to vibrate and we get some noise. Now
when I tried this, it did not work. Watch. I would maybe make a little sound and I just could not
get it to work. And then I discovered that if I take my finger and I press down on that safety
glove, I was able to get a sound. Let us see if we can do this. It is a terrible sound but I was able
to make a sound and I had to make some changes to make that happen. Humans have been designing sound
for thousands of years. That is where all these different musical instruments come from that are
out there. Using simple materials, you can design your own musical instrument and make some really
awesome sounds. Science is so cool and it even sounds cool. Thanks for watching.
