DIY Off Grid Cabin Build - Episode 38

The Woodhaven
54 followers
3 Video Views·Sep 14, 2025
In this video, I start on the sleeping loft. I ended up getting one 2x6 short so I couldn't finish attaching the loft floor.
If you are planning to shop on Amazon, consider my Storefront:
https://www.amazon.com/shop/thewoodhaven
Check out Amazon's Hottest Deals (updated hourly):
https://amzn.to/3K5ybkn
Check out Deep Discounts on Open Box Tools:
https://amzn.to/3MeYZ3h
Music Links: https://artlist.io/Daryl-3392866
DISCLAIMER*
This video and/or description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
All right today I'm going to start on the sleeping loft right here. So I've been moving everything
from this end of the cabin over to this end of the cabin. So I still got a couple things. I'll
be using that lumber there but I need to move this sheet of OSB over there and probably this
makeshift bench that I've got here on these sawhorses. I'm going to move that out of the way.
But today's the day. Starting to work on the inside so let me get started on that.
Okay so my loft is going to come to here and I'm actually going to rest
on top of this header right here. So I want to measure my height here so I can replicate it
on both sides.
And I'm measuring from the bottom plate not from the floor because I need to know
how high to cut my my two by fours.
All right that should give you a little bit of an idea of the sleeping
loft area. That'll easily be enough room to throw a double bed mattress up there.
Should be plenty of room to sleep.
okay I miscounted how many two by sixes that I need. I thought that I had four
eight footers but this one is just a stud so it's not
long enough to span the whole distance but it will work as this last one here.
I just need to cut it down but what I'm doing right now
is I'm using this to mark where the bottom will be.
This one I'll just lag bolt it to these studs.
That one's not going to have a whole lot of weight on it and I think the I'll nail it first
and then I'll come back in and I'll lag bolt it so I'm not worried about that. Should have plenty
of strength and since it's just on the very edge it's not going to have nearly as much weight on
All right I do have my clamp so I can just take this off and pop to the other side
and now I can push these guys in.
So since this isn't eight feet all the way across it's eight feet on the inside of the walls
not against the studs so it's going to be seven inches less so 89 inches instead of 96.
So that one's four feet so I need to cut seven inches. I need that one to be 41 inches
so I'll cut it the same length this way but only 41 inches this way
and then I should have enough for that whole platform.
All right so I got as much of the sleeping platform done as I could. I still need a two by
six on this stud going across so that's missing. Once I get that in I'll be able to attach the
floor but that's why I can't attach the floor right now. So that's going to do it for this
video. I can't believe I miscounted how many two by sixes I need. I was doing it from memory at
the store that's the problem but I think it looks pretty good so that's where I'm going to leave it
this week so I'll talk to you guys later.
