From FMA supersonic rev to grs-resurrection in a week. Fastest pistol x-bows in the world

The Technology of Old Crossbows
4 followers
1 Video View·Sep 13, 2025
From FMA supersonic rev to grs-resurrection in a week. Fastest pistol x-bows in the world
All stripped out again.
Parts ready.
Sanded up and ready to paint.
Literally got all the burrs off the ends and
like the inside.
Should run a lot smoother now.
Paint time.
Well we're in the final now.
Everything is tight as a drum.
Just made a new string.
Seen mine come with a timing mark.
Makes setting that up a lot easier.
This is nearly 555mm actually.
It weren't 530mm like I thought.
I think the original one is a contributing factor to the limbs breaking.
They're meant to be 520mm but this was only 510mm.
That really wouldn't have been long before that snapped.
Especially in those silly plastic nocks.
Anyway.
Get this back together when we're not actually very far from
doing a bit of target shooting with it.
See what white bolt it wants to use.
As we can see from my timing mark it's about 2.5mm to the right.
Got more cams sticking out that side than that side.
Quite handy having a timing mark on your string.
Give that two turns by the look of it.
Looking at the cams that looks about right.
A few bits and pieces on here.
It's peeing down with a rain.
Never mind, it's not in the shed.
I might stick my X-8 on it.
Go out and have some fun.
I did actually forget when I put my telescopic sight on this
that I've got two separate Picatinny rails
and I've piled one down at the front
to angle it down for my telescopic sight.
And then the other one I've piled the other way for my X-8
to get my zero, wouldn't I?
Because especially on my X-8 I like to keep the rectangle
in the centre of the screen so I make alterations here
rather than on the sight itself.
Or I'd end up with the rectangle
like so, that's the screen.
I'd end up with the rectangle down here.
I'll whip this one off and then I'll put my X-8 one on
with the X-8 and we'll be good to go.
My X-8 one has actually filed down at the front
to bring the sight down, that was always high.
Well no, actually that was low, that's it, low.
What I used to do was put packers under the back of the mount.
But as I've got two of these I decided
I might as well just file these.
So both of my sights have their own picatinny rail.
The telescopic one is filed at the back
to tilt it upwards.
And no Tom, you're not getting this in the box
when you get it back.
Now that should be somewhere.
Near zero, about 10-12 metres.
Even though it's on a different bow.
We will see.
Oh, that feels different.
Oh, it's lovely and balanced.
Got a bit of weight to it though.
Right, sort some bolts out on the target
and get in the garage.
