Small Antique cuckoo clock from the 50s or 1960s part 3

Chrono Chronicles
8 followers
4 Video Views·Sep 11, 2025
Welcome back to the Antique Clock Shop.
Okay, this is the third and final video of the small antique clock from the 50s and 1960s.
In this video, we're going to go ahead and get it reassembled, get it on the test stand, and start getting it working again.
I've still got to find some weights for it, but I do believe I have some.
I've got some clock hands coming for it, so let's get it back together and get it working.
Okay, we've got everything ready to put back together.
I went ahead and pulled the movement off the camera. That was a little easier.
We'll have to get the bird back on here.
Get it back on that little mark I made earlier.
We'll probably still have to do a little bit of adjustments on them.
Then I'll get these chains in.
I'll show you how those go here in a second.
Get the screw tightened up a little bit.
It's a little easier to do them outside the case.
There's a lot of room in there to work with the bird here.
I'm sure I'm going to have to do some adjustments to get them in the final spot, but that's good enough for now.
What we've got to do now is, I've got the chains set up.
I'm going to get the hand cycle out of my way.
I'll take the chains from each side and put them on the little sprocket here.
I can work it around.
It's a lot smaller than the last clock.
It's not a cuckoo clock anyway.
Let's see.
The chain is going the wrong way.
I'll get it dropped down in there.
Pull it back out.
There we go. It looks like we've got it on there that time.
I'm going to click around here.
There we go.
Pull it through nice and easy.
I hope it doesn't fall off of there.
I'm going to grab a little link with this tool here.
Yep, we're getting it.
There we go.
I'm just going to pull that tool out.
A little more slack here.
All right, now I'll do the other side.
This one is going to be a little trickier.
A little patience will get it.
There we go.
This side, all right.
Walk it around.
There it is.
Cool.
Do like I did the other side.
It might even go off track a little bit.
Get it back down there.
There we go.
Oh, it's jumping from the line.
There it is.
A little more slack on this one.
Same thing.
I'll set it there and hope it doesn't fall.
There it is.
Hook the tool onto it and pull it through.
Okay, so now I'm lowering the case here.
I think it's really got to go.
Maybe I'm going in the right direction here.
There we go.
It's that way.
Pull it through.
There it is.
Yeah, we're right.
Okay, now I'm going to lower it in.
I need to hurry now.
Just slide on the chain there.
Line up the arbor.
There we go.
All right.
Now we're getting there.
Get the cardboard up front.
Keep hitting that door.
Now I've got to do one part.
Line up the little screw here.
Okay.
I'm going to go ahead and put these screws in off camera.
It will be a little easier.
We'll be right back.
Okay, I've got the movement all secured in there.
I went ahead and got the linkage on the bird to the door.
I've got that all taken care of too off camera.
Now I'm going to have to put these bellows in here.
That's going to be a little tricky.
Let's get started with that.
Let's see.
This linkage is going to be fun to play with here.
That side.
This one's going to be something too.
That side has got this locked in there somehow.
I'm doing surgery here.
That looks better.
This looks just like that.
That's going to go the other way.
I've got a lot of room.
It's going to make it tricky.
That might be it there.
There's the bird.
All right.
There's a little hole for the pin that helps line that up.
Get that one in.
Now I've got a little side screw here.
Line that up there.
All right, that's looking good.
All right.
Now let's see if we can get the other side in there.
Good.
That's my pin right there.
Get this pulled out.
I've got to go over this one.
There we go.
All right.
That way.
Slide that in there.
A little tight.
I think it got caught on the hammer there.
Okay, there we go.
Pin lined up.
Side screw.
All right.
Let's see if they work.
I hope they do.
I'm sure I've got to do some adjustments on them.
Let's close that now.
It's going to be hard until I trip it again.
I'm going to find that little brass piece.
There it is.
Lock that in.
I'm going to move that.
There we go.
I heard it click.
Okay, let's see if they work.
Looks like it's going to go.
All right.
Bottom of the hour it looks like.
Let's see if I can get that to be easier once I get it on a test stand.
I just want to make sure everything is going to work before I got that far with it.
Under the bird.
Yeah, we'll have to get it on a test stand.
Then I'll have to do some adjustments on that.
That will be our next move is to get it on the test stand, get these linkages worked out
so everything is in sync.
We'll get the hands on here and hang the weights.
I did find some weights.
All right, we'll get it over to the test stand and go from there.
Okay, we got it on the test stand.
I got the weights working.
The weights are a pretty good match for the clock.
I have to do a little work back here in the back with these little linkages.
I actually had to make a new one for this side here.
The one they had in there was too short.
The bellows, just like the last clock I did, the paper is going to have to wear in.
As time goes by, probably in a couple of weeks, you'll hear the sound will start sounding better on the bellows.
I got the back door here with a little gong on it.
Slip that in there.
I'll have a clip at the end of the video with the cuckoo going.
Not bad, not bad for a busted old clock.
We made it work.
I actually hit the pendulum there and it stopped ticking.
All right, that's it for this video.
Thanks for watching.
