Our DeWalt® DCST922P1 14” cordless string trimmer came with the DW01DT995 QuickLoad™ string trimmer bump head installed. Here’s how to quickly reload it and keep it in good shape!
Each season, it takes a moment to remember how to load the QuickLoad™ the bump-feed trimmer head with 0.080” (2.0 mm) trimmer string, but it is intuitive and there are marks on the head to give me clues of what to do. In no time at all, I’m a pro again and can reload the head in a minute.
To keep reloads speedy and convenient, keep 20’ (6 m) precut coils of the trimmer string ready to go.
Let’s get to it! The steps to reload the head are:
1. Remove the battery to eliminate the possibility of starting the trimmer. 2. Make a 20' (6m) coil of 0.080" (2.0 mm) trimmer line or better, use the one you have on hand. 3. Align the metal housing eyelets with the arrows on the spool grip cover. 4. Thread one end of the trimmer line through an eyelet. Push the line through to and out the second eyelet. 5. Pull the line through the spool until there are equal lengths of string on each side of the spool housing. 6. Grab and hold the spool cap with one hand. With your other hand, wind the string onto the spool by rotating the spool grip cover counterclockwise. Continue winding until 5" (130 mm) of string remains on each side of the spool housing.
If there is a short section of string in the head, or an obstruction needs to be cleared, the tabs on the side of the spool cap can be depressed and the head disassembled, cleared and reassembled. Then a fresh line can be installed.
We use a light spray of WD-40 or spray lubricant in the interior of the head just to keep things running smoothly.
Should you need a replacement head (DeWalt® DW01DT995), you can get it here:
We’ve had the tool for 5 years now, how has it held up? To see, check this out:
COMING SOON!
JUST DO IT YOURSELF!
Hey, Dirt Farmer Jay here from dirt
farmerj.com. We love having a string
trimmer, but sometimes when it comes
time to change out this trimmer line in
the head here, it can be a bit of a
hassle. Well, I'll make it easy for you.
Stay tuned and I'll show you how.
[Music]
Hey, Dirt Farmer Jay here from dirt
farmerj.com. We really like using uh
this DeWalt cordless string trimmer.
It's the 922 model. We've had it for
five years. And if you want to see the
review on that real quick, check out the
link above or in the description below.
But today, what I'm going to do is
demonstrate to you how you change out
the line that's in these. And they all
work in similar fashions. We're using
this particular model to walk you
through it. And I've purposely clipped
uh the the whiskers on it, so to speak,
uh to emulate the fact that we've been
string trimming and we got to the end
and we're out of trim and line and and
now uh it's time to get rid of this line
and put in the new line. So, let us show
you how that's done. Okay, so what we've
done here is set this up in such a way
as though you have actually beat the
whiskers off of this down to here and
you're out of line inside. So, what I
like to do is wind these inside so I can
take the cap off, discard the stump
amount that's left, rering it, and then
reassemble it. It goes together very
quickly. I'm going to use a little bit
of WD40 or your favorite um lubricant or
displacement fluid like this that can go
in here just kind of keep things running
clean. All right. So, what we're going
to do is I'm going to rotate. And when I
do, you're going to see that whisker
disappear as it goes in. And there we
go. I'm going to rotate that around.
Now, both of the whiskers, see they're
they're gone completely. Now, you're
going to come to the area where there's
a thumb push in on both sides. Right
there. And just do that. Push in. It
starts to let go. Push in. Let go. And
when you do, now you've got the spool
that's open there. Now, in this case, we
have a little bit wound on it because we
did as a demonstration. Uh so, you have
a choice here. One is you can try to pry
out and find the end and pull it out or
you can pull the spool. If you pull the
spool, there's a little trick to knowing
where things go. So, I'm going to pull
the spool out. We're going to go ahead
and get rid of the line that was in it.
And then we're going to go ahead and put
the spool back. But when we do, first of
all, it's this side that has roughly the
shape of the nut in here that goes back
in. Don't put it like this. That won't
do a bit of good. You're going to have
to put the nut in or in around the nut.
However, this is a little finicky. So,
if you look right there, that's the
eyelet in which the line's going to pass
through from one side of the body of the
trimmer head to the other. And so, what
you need to do is line that up with the
mark out here. Do you see the index mark
right out here in this collar? It's only
appears in one place.
There it is again. Right there. So, what
we're going to do is line up
that spool head with that in line. And
you'll feel it drop in place. If it
doesn't drop in place, you're 180 off.
You need to just spin around, put it
over here, and put it in. Okay. But I
did have it correct. So, we'll do it
like this. We put it in. It's now ready
to go. Now, you have a choice. Either I
can put this back on or I can spool it
and then put this back on. Just so you
can see what's happening here. I'm going
to leave this off for right now. So,
what I need to do is line up
one of the holes here which has a mark.
Both of them do. The one opposing over
here. Line it up with that. And what now
happens is you have a passage through
here. Now, here's one of the tricks I do
to speed this up, cuz don't you just
love it when you run out of trimmer line
in the middle of the job and you've got
to go out and pull and all that? These
heads take about 20 foot of um this
string trimmer. This is
080
inch um trimmer line is what's specified
here. I found that I can go up to 0.095,
but this trimmer line is what we're
going to use. There's about 20 foot.
I've already made this line. So, what
I'm going to do, go ahead and insert it.
Sometimes because it's curved, it's
going to go off sideways. Uh, you may
have to take a couple tries. See, if I
run off there, that's going missing. But
if I fiddle around a little bit there,
it came right through and it's out the
other side. Now, here's the trick. What
you want to do is pull this through
until you're about halfway through.
And then I lay this down on the ground.
I'm not going to do it here. But I just
end up matching the two ends
like this. Get the two ends out on the
yard
and pull while this laying on the ground
until they're both equal distance. In
this case, I'll just do it this way. You
can see it all wants to wind up really
ugly when we do that. But we're just
going to end up with it halfway
in just like that. So that's about the
halfway point. Now we can take this and
these long ears go in these places where
there's shoulders around it. There's one
here, one there. You simply place it in,
push it in, and click it in. And when
you do that, now you've activated. This
is all loose at this point. But if I
start by grabbing this and rotating
this, hear that click, click, click.
What it's doing, it's ratcheting and
pulling this around so that watch the
ends disappear. I'm just going to do
that.
Remember, I'm getting about 20 foot of
line in here or 10 foot of whiskers on
both sides of the head.
We're almost down to the end.
We'll see how close I got on the
halfway.
And we're going to let it come to about
I got pretty close. Okay, that's about
capacity in there. I can feel it in
there. And then once we run it, it'll
trim itself right here on the shroud on
the cutter. You'll end up with whiskers
about this long. So now this is ready to
operate. It's wound up. When we fire it
up and it trims, and then you start to
wear it down, you're simply going to
bump on the ground. And every time you
do, it's going to advance through
centrifugal force uh and the spool in
there and give you a fresh set. That's
how it works. Now, one other thing I
would suggest that you just do a little
bit of this from time to time, put
something in there just to kind of keep
things lubed up and to let it release
the line easier. Uh, and that is how you
do it. This is really easy. So, if you
think this is a good tool and a good
system and solve something for you,
another thing you might be interested in
is DeWalt's cordless leaf blower. Check
out this episode where we did a review
on it. We've actually used it for quite
some time. It's worked very well for us,
but we'll walk through the features with
you and you'll see if it is a good tool
for you. Hey, thanks for joining me
today. Until the next time, this is Dirt
Farmer J from dirt farmerj.com.