Replika Sungai Untuk Ikan Wader.

Fish for Talks
2 followers
Imagine you can enjoy the serenity of the Kapan River
listening to the calm sound of the water
watching the water sparkling like a crystal when it is reflected by the light
and feeling the flow of the natural water
I made a replica of the Arusderas River
as a media for relaxation and meditation
The process started by making a simple aquarium stand
to design a complex and hidden aquarium system
Before designing the aquarium
I decided to make a simple aquarium stand
Using a 3x2 wooden block
I will cut it into several parts
according to the required size
Next, assemble the wooden blocks that have been cut
I use a bolt so that the construction is stronger
and easy to disassemble and install if necessary
For the top, I use a 6mm thick plywood
Although not too thick
this plywood is strong enough
because it is supported by the wooden frame below
Next, I sand the entire wooden surface until it is smooth
This process is intended to remove the sharp edges
and the protruding edges
while making it look cleaner and neater
After the sanding process is complete
I clean the flying dust
while watering the plants
At night
I decided to continue painting
I use a black wall paint
so that it looks the same as the other aquarium cabinets
The simple aquarium stand is finally finished
The next day, I continued to design the aquarium
Before starting to make the hardscape
I covered the entire inside of the aquarium
using transparent stickers first
The purpose is to protect the glass
from the cement spills that I will use
in making artificial stones
To facilitate the installation of stickers
I spray soapy water
This makes the stickers easier to smooth
and reduces the risk of air bubbles
Next, I start installing the filter
I use an under gravel filter
combined with a 2000 liter pump per hour
After that, I arrange the styrofoam
as an artificial stone foundation
Then I knead the cement dough
by comparing two parts of cement
and one part of sand
then add enough cement color
After the dough is finished
I continue to the process of forming artificial stones
The reason I don't use real stones
because it's quite difficult to find a stone shape
that matches what I imagine
By making my own artificial stones
I can adjust the shape and size
according to what I want
To reduce the weight of the aquarium
and save the use of cement
I add pieces of styrofoam
The process of forming the basic pattern
of artificial stones is complete
For the time being
I wait for the cement to solidify first
before continuing
to the process of detailing artificial stones
After waiting for a while
I continue to the detailing stage
to clarify the shape
and texture of artificial stones
The detailing process takes quite a long time
but in the end, it's done
After this, I will wait for a few days
until the cement solidifies
then continue to the next process
It takes two days
Finally, the cement solidifies perfectly
This is the result
artificial stone
The shape is in accordance with what I imagined before
To make artificial stones safe
for the aquarium
I soak it with water mixed with
a few bottles of vinegar
for a few days
After soaking artificial stones
in vinegar solution for a few days
Today I continue the process
I start by removing the protective sticker
from the glass that is not covered by cement
Remove the protective plastic
on the wave maker
that I hid before
Drill a hole in the middle of the artificial stone
Empty space inside
I will fill with sandstone
and sandstone
as an additional media filter
The top part
I cover with fine sand
to dilute the hole
and make it look more natural
At the back
there is a water output
which is located at the bottom
I cover the area with sand
which will create an effect
like natural water
At the front
I use sand that is quite thick
so that the plant can be attached
firmly and not easily released
Next
I stick whipping moss on the stone
I deliberately don't use
large plants
so as not to disturb the focal point
which is the water flow
that will flow in this artificial stone
I also add
Wabi Kusa Hydrocotyle
in the corner of the water flow
At the bottom
I plant Valisneria
The long leaves will follow the water flow
adding a natural impression
like at the bottom of the river
This is the time to wait
fill the water and turn on the pump
I hope everything goes
as I imagined
And finally
the water flows very well
from the source of this artificial water
Next I add Starter Bacteria
before putting
the main host into this aquarium
I will wait
until the water is clear first
The next day
the aquarium water looks
much clearer
as it welcomes life that will grow
and breathe inside
Today I will put
the main host into this aquarium
which is Wader fish
And I also add
some other types of fish
as an ecosystem completer
This is a replica
of the Arus Deras River
that I made as a relaxation media
It feels so peaceful
to see the flowing water
and hear the sound of the water
See the eyes of the flowing water
without stopping
as if it came from the womb of the earth
which is a symbol of life
The flow gives breath to everything
that grows around it
The flow of water flows slowly
forming an unprecedented natural pattern
like natural paintings
that continue to change
but always beautiful
The water from the river continues to flow
and move whatever it passes
Wader fish swim
among the plants that dance
all in harmony
Simple but really beautiful
From simple and cheap lights
created unusual light
Dancing on the surface of the water
creates an atmosphere
that cannot be valued
There are no words
just a peaceful conversation
flowing with the water
drifting softly in the light
and staring in silence
If you enjoy the journey
don't forget to press the subscribe button
