How To Set Up An Antique Longcase Clock - Dials Antique Clocks, Lymington

Chrono Chronicles
8 followers
3 Video Views·Aug 26, 2025
Martin Fairhurst owns and runs Dials Antique Clocks and has over twenty-five years of experience working with antique clocks
The Dials Antique Clocks showroom is in Lymington on the Quay and is one of the south coast's leading centres for vintage timepieces.
Here, Martin explains how to set up a longcase clock correctly.
Hi, I'm Martin Fairhurst from Dahl's Antique Clocks. I'm here today in my showroom in Livington
and I'm going to show you how to set up a long case clock. So if we head over this way,
the movement and dial from a Scottish clock, old case, as you see there's the actual basis of the
case and I'm now going to put this movement dial on top of the clock. So we just place it like this
and put it onto the shoulders of the clock making it look sort of central so it seems to all line
up and there we go that looks probably just about good enough there. So we do that and then we get
the pendulum. Now this is probably one of the slightly more difficult bits but we basically
have to open the door of the clock, feed the pendulum into the clock and bring it up to the
back of the clock. I've put the pendulum inside the clock now and I'm just feeding it up through
the back. Now this is always quite tricky doing this but it has to actually go, I don't know if
you can see this, the suspension here has to feed through what we, the actual name is the crutch
here, it has to go through the centre of the crutch and be fed up through. I'm holding it
this is a two-handed job so you're feeding it up and at the top there's a brass holder
and we literally feed that just sits on there and what we have to be very careful of is you can see
the barrels of the clock here that the line isn't tangled up. You really don't want the line either
dropping over the top or over the front of the barrel. So you can see here it's sitting perfectly
on the barrel and this is exactly what you want to see. Now what we're going to do is put the
actual weights on the pulley. So when you look at the front of the clock what you find is the
pulley tends to rest like so and what we want is the pulley to turn up like that onto the line.
So that's the kind of action you want. Then we're going to put the weight onto the pulley
and that just literally goes like that so it's really really easy but you must have
the pulley on the line etc. Do the same with this one on this side turning the pulley over
hooking the weight on
and the next thing to do is to make sure that the clock is going to tick evenly. We've got the
weights on the clock. The next thing to do is to start the clock up and get the pendulum moving.
This we do by just giving it a little flick like that and the most important thing of setting a
clock up is getting a really even tick. It's got to be like a metronome it's got to be
even on both sides. If it's got a jumping sound it'll never work. It may go for a bit but it's
going to stop and so many people get this wrong when they're moving or setting a clock up they
may move it out and put it back into the spot again. If you haven't got a really even sound
the clock will stop. A very common problem. So there we are the clock's ticking evenly
and that sounds very nice indeed. So I'm closing the door and now I'm going to put the top back on the clock
just sliding it back like that
it looks all nice and even and that clock's going to work absolutely fine. Thank you.
