Steel Structure Tutorial in Revit – Complete Guide

some technique in some where
364 followers
4 Video Views·Aug 20, 2025
Hello my YouTube friends. Welcome to this exciting lesson in Revit Structure.
In this lesson, I'm going to teach you on how you can model this sports facility that you are seeing here.
Now, if you watch from start to finish and learn on how to create such a facility,
I can assure you, you are going to master all the tips and tricks that you can use to create any complex, you know, structure that is a steel structure in Revit,
including a concrete structure, because Revit is the same software that we are using here.
Right now, if you like what I'm doing on this channel, please make sure that you like my videos
and subscribe to my channel. And most importantly, check my website where there are detailed courses.
It's www.skillmaxcard.com. The link is in the description. And most importantly, don't forget
to turn on the bell notification. So we'll get started in this lesson. And what I'll do, I'll
simply delete everything here so that we start from scratch. So what I'll do, I'll just orbit like this,
just select everything like that, and delete from there. Now I also have these, I'll select this one,
right click, select all instances, visible in view, and delete from there. I'll also select this one,
which is a floor, right click, select all instances, visible in view, and delete. All right.
Now, we'll just remain with the grids and the levels. Now, if you don't know how to model to
create the grids and the levels, there are tons of tutorials on my channel, you can just watch any
and you should be able to, you know, to learn how to create the grids and the levels. We just want
to save a bit of time here. All right, even this one, I think I'll just leave it. It says model in
place and I have lessons on modeling in place on my channel. Okay, so what I'll do, I'll just go to
south elevation so that we see the levels that we have. All right, so I'll select this one,
this one there, just click it by the grip there, and now drag it so that we're able to see,
and I'll also select this one, click by that symbol there, the heartbeat symbol, drag it like
that. So we just have TOFGL and TOC and the eaves. So we'll just open the, okay, where do we start
from? We'll just open the TOC, top of concrete, I'll just double click there and here we are. Now let
me also just remove this, you'll see why I added this as we go on in the lesson. So select for instances
visible in view. Okay, I'll just delete also all these. Okay. All right, so I'm here and I'll start
with the modeling of the concrete columns where the steel columns will sit. So to do that, just go
to structure and click on column and now go to your properties and find your concrete column there.
I'll just pick this one here, click on edit there and just counter check the dimensions b and h. So
450 millimeters is okay for me. I'll just click on okay. Now you can see from here that we are on
top of concrete. We want our columns to go down. So I'll select depth and all the way up the
TOF, right. And now from here, I can simply add my column right there or I can also add all the
columns at once. And I'll start with this grid here so that I can copy on the other locations.
So I'll pick at grids and select everything like that. The preview will show all the concrete
columns and I'll click on finish. Right. Actually, for the concrete columns, I can just select all the
grids. So I'll go back and am I still in the let me first of all finish? Okay, I'll just click on yes.
So I'll pick at grids, select everything because for the columns for the concrete columns, I want
them to be everywhere and click on finish. Then I'll go to my 3D view and you can see that I have
those concrete columns. I'll click on modify to escape. Now let me also add the floor here to
save as a ground also. All right, so I'll go to TOC and go to structure, then just find the floor
right there and click on floor. Now I'll just pick this generic floor. If you want, you can check each
dimensions by clicking there and going to structure and clicking on edit. So for this one, I'm just
using a meter because I just want this one to save as the ground. If you want, you can put the actual
thickness here. But I'm just reminding you that this one I just wanted to save it. I want this to
save as my ground. So I'll just click OK, apply OK. And now I'll use a rectangle and I'll just create
it at random from this point up to that point. And now I'll use a line by clicking on line there.
And I just want to trim it from there up to that point and up to that point. Now you can use the
trim from here or just TRL on your keyboard as a shortcut and trim these lines. Right, once you
finish editing, just click on finish there on the green checkmark. Click outside. Let's see it in 3D
and see that this is what we have. Okay, now I think I need to counter check my columns there.
I think the dimensions are not right. So I'll select on it or maybe let me check this one. I'll
select on the on this concrete floor. Let me check the level is TLC. Okay, I think this is wrong.
I want this one to be at GL, the ground level. Click outside. What I want are these columns to
stick out of the ground as you can see from here. Okay, now this is correct. So in Revit, you can
make corrections at any time even if you place certain things at a level which is not correct.
So now I'll go back there and let me start modeling my steel columns on top of the concrete columns.
So just go to structure, click on column and the column will be 20320346. So I'll just click there
and find it here, which is right here. Now counter check here, my column has to go all the way up to
the eaves. So I'll change this one to height, then all the way up to the eaves as you can see from here.
Now what I'll do, I can add these columns one by one. Or if I want, I can just click add grids
and select all these grids. Release my mouse, you can see that I have those columns. I can finish
there and just be at fine level of detail so that you can see the columns like that. I'll click on
modify. Let's check it in 3D. Just click there, you can see that we have our column right there.
Now you are seeing the colors like this because I've already added the filters. So if you want to
learn on how to create filters so that you have these colors, I have a lesson on my channel, you can
check it out. But for now, we want to focus on the modeling techniques and on how you can create
this structure right here. All right. Okay, now having done this, let's also model our die beam here.
Our die beam, you just go to structure, go to the beam, and now find it here. And what we want is
the 203, 133, somewhere here. Let's find it. By 25, right here, I'll select on it. Now if you're modeling
in 3D, make sure that 3D snapping is selected and also chain is selected so that you can just click
there and you can continue by just clicking on top there. And you can see that my beams are
being created there with the colors already which I've added to the filters. All right, I'll escape
once here. Now I'll just go to TOC and now I'll go to view and go to elevation. I want to create
a framing elevation. I'll just click on framing elevation and put my cursor there. Once it
highlights like that, click on it. I'll escape once, zoom in there, double click the head quickly,
or you can go to the framing elevations here and double click. You still open the same view.
Now from here, just expand this box, right click, hold your left mouse, also hold your left mouse
like that. You are seeing the members are single lines. Change to fine level of detail and you can
see it like this. Now let's also have those members at an angle and we are going to use an IBE200.
So what I'll do, I'll simply go to structure. I'll use beam and I'll just click there and find
the IBE200. Then I'll just pick it maybe roughly at 400 from the top there and I want to pick
the center. I'll just use this option draw mirror axis. I'll select this one here. I'll put my cursor
there, right click, then go to snap overrides mid between two points. Am I doing the correct thing?
Put the cursor there, right click, snap overrides mid between two points. I'll select this point
and that point. Now let me try to click below here. Okay, you can see that we have that particular
member here. Now I don't want it to be like that. I'm just going to change, you know, how it appears
here, the joint right there. Okay, so maybe let me just drag it a bit there. Select on it and let me
drag it up to there. All right, so that it doesn't matter in that particular way. All right.
So now from here, what I want to do, if I just go to my 3D view, let me see what I have.
A bit like this, I can select this member so that I orbit about that point. Zoom in here using my
mouse and orbit using the shift and the wheel on my mouse. So I'm just going to, you know, to ensure
that I just go to still and I just want to copy this member. So I'll select this one, hold ctrl,
select this one. I'll go to still, still tab there and click on copy, right? So you can see that
I've copied that member, right? So it's joining properly there. I'll also come down here, click
on copy, I'll select this member, select this member by holding ctrl, click on finish and I
have it like that. I just want to make sure that as I copy, everything should be good. So
let me also select, okay, I hope I'm doing the right thing. Now I've just this view, which is
right here so that in case, you know, I miss what I'm doing, I can always refer to this one. Okay,
so this is the joint that I'm working on. All right, so what I'll do, I'll also copy this part,
I'll select this one, this member, hold ctrl, this one, oh, I already have those, you know,
copying. So I'll put together there tab, tab, select on it and I just want to remove it.
Okay, I think I'm okay now. So I'll go back there and click on copy, select this member,
hold ctrl, select that one, right click and finish. Okay, now I'll copy this against this one.
I'll select this member. Actually now, I can, yeah, copying is fine. I'll select this member,
hold ctrl, select this one, right click and finish. Okay, now my joint is okay. So the copying,
it means that I'm just welding on those points. So it's okay the way it is. Now what I'll do,
I just need to mirror. All right, I think mirror is okay. So I'll just pick this option,
pick axis, I'll select on it. So I'll just pick this one, pick that one, pick it. Now I was trying
to find, you know, a multiple option. I don't seem to find it. So I'll just keep on clicking there
and it's still very, very fast. So we have those members just like that. Now I'll go back to my 3D
view and see that I have those members. Now what I'm going to do, I'll simply copy these members
here and there. So I'll simply select all these, just moving in that location, select like that,
copy it and now go back to plan view and I'll click on copy. I'll just make sure that multiple
and constraint is selected and I'll pick it from there. Am I copying this? Okay, I'll go back,
I'll escape once. I'll go back to my 3D view. For some reason, why am I not copying this frame,
but I'll still have to copy it. So let me go back to this particular view by orbiting like that.
Right, I'll go down there. Okay, I'll click on copy. Okay, multiple and constraint. Let me pick
it from there. Let me remove the constraint. Okay, I've removed the constraint. So now let
me make sure that you don't move it sideways. Make sure that it's straight like that. I'll click once
then also take it down there. Make sure that just remove the constraint. For some reason,
I don't know why the constraint is misbehaving, but I can still do that and copy. All right,
then go to my 3D view. So we have it there. So what I'll do, I'll simply remove these members
by deleting, select and delete. Yeah, right. And this one. Okay, now this member for now,
I think in the meantime, let me just hold on a bit. Okay, here we are. Now I'll also add the
members right there. And before I do that, actually, I forgot that I'm supposed to add
one member here. So I'll go back there and let me just mirror this one about this point. So I'll do
that and just click on mirror and just mirror like that. Let me also mirror this one by just dragging
it there. I'll select that member and I'll click there and simply mirror it right there. So I'll
start with this side. I'll select it and make sure that for now, just remove that one. So I'll click
on tab, select on it and remove it. Then I'll select on it, go to TOC. I know that it's right
here. So I'll copy it here and there. So I'll click on copy and multiple selected. Let me
constrain it this time. Let me click there, click there and just click there. All right, let's check
it in 3D view. Okay, perfect. We have it right there. Now let me also select this one. Now make
sure that you remove that one tab to select it and remove it. I'll select that particular member
then go to TOC. I just have to bring it here. So just click on copy. It's already selected. Then
pick that one and bring it here. Escape. Check it within 3D view and you see that we have it like
that. Okay. Now what we can do here, we can also just select on this particular member CS as a
shortcut to create similar, making sure 3D snapping is selected. And I just want to pick this member.
So you can see that you can also like try to model in 3D view. Just make sure that it's straight.
So I'll just pick it there. Once you see the straight line, you can simply just click there
and also pick it from there. You can as well do this in your, in your elevation, but I think this
is okay. Make sure that it's straight. Pick it from there. I think you can see that maybe here
you can make a mistake. So ensure that it's done in 3D. I think let me do that. I mean in elevation.
So I'll go to elevation. This one is CS. So I'll select this one CS on your keyboard to create
similar. I'll pick it from there. You can see that I think the best option is to do it in
elevation so that you don't miss anything. I'll select this one, go to 3D. You can see this is
the one that I have. Now what I'll do, I'll select this one the way it is. Then I'll copy. I think
I need to go to plan view. So I'll go to eaves. I think I can open now the eaves here.
So just go to eaves right there. Check it in 3D view. Select on it. I want to copy it there.
Then I'll go to the eaves. Then I'll simply click on copy and I can copy it from this point
and all the way up to this point. Make sure that the center is highlighted. Okay. Perfect. I'll
escape and check it in my 3D view and see that now it's correct. Okay. Now I think there are
also some members here as part of the tie beam. So I'll select this one CS to create similar.
With these ones, I think I can simply do that. Just pick from there. Chain is selected,
but for some reason it doesn't continue. I can also continue up to there. Now what I'll do,
I'll select this one, hold control. Also select this member. Let me go to my eaves.
This is the member. So I just have to copy it. So just click on copy. Make sure that you pick
somewhere there. I'll add it there. Add there. Just there. All the way up to the end.
Right. Escape. Go to my 3D view and simply remove this part. Okay. So we just have this one,
which is not needed. A bit like that. Also just remove this part. It's not needed. This member
has to end up to somewhere here. It's selected in 3D view. So I'll just go to eaves. Okay. That
particular level and here. Okay. I think it has to end up to somewhere here so I can drag it
up to somewhere here in plan view. Go back to my 3D view and you see that we have our member
right here. Now we also need to add a member from here up to there. I think again, I can do this one
in plan. So let me go to the eaves. All right. So I'll select this member CS on your keyboard to
create similar. Now I'm just going to pick this point and maybe I can start it from here. Am I
able to pick the center? Yes. And now up to somewhere here. Escape. Go to my 3D view and
we have it like that. We are going to trim all these edges if I want right now. I can do that
by just going to instill. Still tab there. Then I'm just going to, I think this one might work
fine. I'll select this member. Hold control. This member. Right click and finish. Right. Once you
create the mitre, then I just hope that this one is not outside the limits, but I think it's good.
I'll select still and go to copying. Then I'll copy it against this one. Hold control. Select
this one. Right click and finish. Okay. Now maybe I just, I just needed to move this one outside
a bit. I can fix this in plan view. I think for now it's okay. All right. So we also have
this part select this member CS on your keyboard and let me do it in plan view. I think that's
the best approach. Now let me just check my reference drawing here. So actually I just need
one member from end to end so that these others can sit right there the way it is here. So I think
that's what I need to do. So I'll select one then CS on my keyboard and I'll just pick from there
all the way up to the end. Let me just try it once again. Okay. I think it's okay. Right. I can go to
plan view and try to adjust it. All right. Let me also do the same on this one. I'll select on this
one CS on your keyboard. Let me pick it from there and just click it like that. Then we have it at the
end also. Okay. So now the next thing that we can do here is to create our, you know, the top part
there. So I'll select this member and I'll extend this one by 1200. So the top offset, you can see
this member ends all the way up to the eaves. The top offset, if I extend it by one two, I can have
it like that. Now what I'll do, I'll just draw the top code and also the top code there and also the
codes inside there. So what I'll do for the, for the codes, I'll use a beam. So I'll simply go to
structure. I'll go to beam and I'll use a 203 by 133. So I'll just click there and just pick
a 203. Where is it? We have 203 by 133. This is secular. Okay. I think I'll use this one so that
now make sure that 3D snapping is checked and I'll just pick it from the top there and I'll just pick
this top part also. I have it like that. Then I'll also pick that top part there and pick this one
here. Now what I'll do, what I, what I can do here, I can leave it the way it is. I can just weld here
and there. This is fine. Or if I want, I can, you know, ensure that I miter this one and that one,
and then this one sits at the bottom, but I think this is okay for now, but here it doesn't look
right. So I need to cop this member against this one. So I'll go to steel and just click on cop.
I'll select this one, hold ctrl, select that one and right click and finish. So this is what I want.
I can have a weld there. Then I also go to steel and I'll pick the cop, this one, hold ctrl against
this one, right click and finish. Okay. All right. What next here? We have some members inside here.
So for this one, I'll just use, uh, maybe a column there. Okay. So I'll just go to structure.
Then I'll pick this one. I'll pick a 152, maybe this one here. And now for this one, make sure
that you activate, I can do it in elevation or even here in 3d view, but make sure that you
activate that particular level, which is the eaves. What I can do, I can even select this one
CS on your keyboard are the eaves activated. What I want is to be having that line on top so that
it sits right there on top. So I can just click there. Now I'll change this one because I don't
want this particular member. I want the 152, this one here. Okay. This is the one that I want.
Now I can check this one, select this one and ensure that that dimension, I can see the dimension
from the center in 3d. Maybe now I can space it correctly. I want to have 2000, maybe up to there
and let me select, maybe let me select this one here. Now, if I select on this member, you see that
I can control the offset. Maybe let me change it to 1000. That's the top offset, maybe even up to
500. So that is shorter. Okay. Something like maybe 700. Okay. Somewhere here. Now I'll copy
this one. I'll select this member and click on copy. Right now, if you want, you can also use
a truss, but I just want to do not to create it on my own, add my own members, but you know trusses,
there are also lessons on my channel where you can use trusses if you want. So there are so many ways
of dealing with this. All right. So now what I'll do, I'll copy it from the center, or even from this
one. I think the center should highlight. Okay, from there, and add 2000, maybe somewhere there.
I'll select this one, then pick this member and let me leave it at maybe 400. Okay, now what I'll do
is to just copy this member against that one. So I'll simply go to still and I'll click on copy.
I'll select this member, hold ctrl and select this one, right click and finish. Oh, okay. Now let me
select on this one and click that small dot there so that I switch the arms. So that is a trick that
you can use. I'll also go back once again there, click on copy this member, hold ctrl against this
one, right click finish. Okay, click that small dot so that it switches like that. Now there's also
one other member which I have to draw right here. If you want to draw that one, you can,
but I think to save on time, I can just leave it. But maybe let me just use it. Let me just
counter check here. Which member is this? Okay, this is IBE200. So let me go back there. Let me
not be lazy. I can identify it by selecting this member. Now after selecting this member, I can go
to TOC. Which one is this? I think it's right here. So I'll just also create an elevation here
by going to view, elevation, framing elevation. I'll just add it there, escape on my keyboard and
double click to open it. Alright, because I want to create those members like the beams in an
elevation. Alright, now change it to fine level of detail. So now we can create using IBE200.
I'll go to steel or actually structure, beam. Now let's create it here. Maybe roughly from there
up to somewhere there. Okay, maybe it okay, it's fine. What I'll simply do is to copy it or maybe
it's too low. So I'll just drag it up to somewhere there. Right and this one also let me drag it
up to the center there. Okay, perfect. Now what I'll do, I'll copy this one against this one. So
I'll go to steel and click on copy, select this member, hold CTRL, this one, right click and
finish. Okay, perfect. I'll do the same steel. I'll click on copy this member, hold CTRL against
this one and finish. Okay, perfect. Now I can go back to my 3D view. We see that we have the member
right there. Now on the other side, I think I can mirror but I just need to fix the copying a bit
because it's at an angle. So it doesn't flip on the other side properly. So I'll just select these
members inside, then go to that particular view. Is this one selected? Okay, I'll select it from here.
Right, so I'll mirror this one. So I'll just pick this one here and mirror against that one.
If it doesn't, you know, mirror properly, I can always fix it. So let me check it within my 3D
view. I think it's okay. I can fix it. I think I can add the copying. Right, like this one, I think
it's not copied properly. So I'll go to steel once again. Copying, select this one, hold CTRL,
select this one, right click, finish. Right, let me switch the arms there. Perfect. You can add the
like that. Right now, what I need to do is to just copy these all the way up to the end. And
we are almost getting there. So I'll select this member, the top one, I'll select, hold CTRL,
select that member, hold CTRL, select this one, and that one, select this member, and make sure
that you select all the necessary members so that when you copy, everything should be, you know,
copied on other locations. So this is the edge. So I'll go to TOC. Okay, I'm assuming that this
is the one I think I haven't forgotten. So I'll just click on copy. Then I'll pick this point,
up to this one, up to that one, that one, this one, and this one. Let's check it in 3D. I'll
Okay, perfect. Everything is there. Did we miss anything? Not at all. I think everything looks
good. As you can see from here, and we are getting closer to what you want to achieve.
But make sure that you watch all the way up to the end so that you don't miss any tips. Now,
right here where we are, we have to extend because you can see that this is just a column,
which is extended all the way up to the top. So I'll just select this one, and hold CTRL,
select that member, hold CTRL, select this member. Where is the other one? Right here. Select that
member. And select this member in the top offset 1200. And you see that we have fixed the top part
right there. Now we don't need this member. So it's just a matter of removing this one,
select on it, just remove it, including this other one, we can just remove it like that. So
these members also they have to disappear. Right, we are using the copying method so that
we can be extremely fast, because whatever is already created, you just have to copy. Alright,
so now here we are. Alright, so now we also have to, you know, to copy up to this point here.
So what I'm going to do, I'm just going first of all to copy, I should have copied at the end there,
but maybe let me first of all add a column on top here. I'll select this column, then CS on my
keyboard. Now since the eves is selected, all I need is a dotted line sitting on top there. So
I'll just make sure that okay, you can see the dotted, the reason is that I think the,
let me change the, let me just go to VG, visibility, graphics, filters, I think the
blue color for this member is not good, because I can't see, you know, those lines. So I'll change
this color. For now, let me just have a green color. Okay. Okay. Apply. Okay. All right. I
think this way I should be able to see properly. So I'll select this one CS to create similar.
And you can see now the blue one there, it means that to sit right there on top.
And as you can see, the blue line is there, I can just click and have my column right there. Okay.
Perfect. I think I can now do the same on this one. This particular one CS on my keyboard,
or select the member face, then CS on your keyboard. As long as you're able to see that
blue line there, you're able to place it the center one and you see that it sits right there.
All right. Let me also do the same on this particular one. Make sure that the blue line
sits right there on top, right there, and we can have our member there. Okay, now we can copy
these other members. So what I'll do, I'll just select this one. And I'll hold ctrl select this
member, select this one and that one. Finish the selection all the way up to the end. Select all
these members, hold ctrl and this one. Now let me go to my EVEs once again. Yeah, I think what I've
been missing is that this point I can see it from here. Okay, I don't know why I kept on struggling
within the 3D view. So ensure that we undid you because you have that point. From here, I can
easily click on copy and I don't have to worry because the multiple and constraint is selected.
Okay, so I've got my 3D view and you see that it sits right there. So even for this particular
column, you can make sure that you do it within that particular level, which is the
EVEs. Because from here, you can just go there and click on column and you can change the height,
maybe from the EVEs or maybe you change it to height. Okay, we are at the EVEs and then use
unconnected. Then put one, two. Okay, this is the fastest way. So don't struggle there in 3D view.
Use this method because it will sit right there. Did I add one here? I think I did, but doing it
in 3D, you might miss something. So ensure that you do it in plan view like this. You're able to
add it right there. If you go to your 3D view, you can add it properly. Okay, so what do we have
here? The next thing is also, I think this one also. Now make sure that I add it in plan view.
Okay, we have this one, just go all the way up to the edge, go to this one. It's right here, we have
to move it there. So just click on copy and just pick maybe from the center. This one, make sure
that the center is highlighted. Select that one, go to your 3D view, escape and you see that you have
it right there. Alright, now there's also something that I need to do here. I think we have a member
here. Again, it's just a matter of picking this member. I think I'm able to do it. Let me try it.
I'll select this one CS on your keyboard. I can pick this one. And I hope I can also pick the
center. Okay, I'll pick this one. Okay, it's right off axis. So I can simply copy this one to this
other one so that I don't create a model with so many errors. So I'll just pick this member,
hold ctrl and that one and this one here. Now I'll go to my eaves there. I know that this one
is sitting right here and it has to come here. So I'll simply click on copy. Make sure that you
pick the middle part. I'll pick that line in the middle, the center and now come here and zoom in
until the center highlights. Okay, so we are good. No errors whatsoever. And it you know, it
cuts there, picking everything from there. Okay, we can miter here if we want. But I think because
of time, we are good. We now want to add our tailings on top here. So the method that we are
going to use, I'll just first of all just start with this other side. Okay, I'll go to structure,
I'll use a beam system, click on the beam system. And now what you can do, first of all, you need
to set the workplane. I'll click on set workplane. And I'll simply pick a plane, click OK. So what
I'll do, I'll just pick the top face of this rafter because that's where I want my paintings to sit.
I'll select now I can just use pick lines, you see we have the boundary and the beam direction,
I will just use big lines here so that I can pick one edge on each on each side. So I'll pick
which one can I pick? I'll pick this one here. Right? One side here, then I'll come this side,
I just want to pick this one here. Then at the end here, I'll also just pick one. Then on top
here, I can also just pick one even this one is okay, then click on trim or tiara on your keyboard,
just trim like that, select this one and go all the way up to the end and pick this line, trim,
then trim this edge or so the corner and now pick this line and trim, pick the line at the end there
to trim. Now, make sure that you set the beam direction, click on the beam direction, I want
my paintings to be that direction. So I'll just select this line. Now once you do that, this is
where these are the boundaries for our paintings. Just come here and check the properties. I want
to have a fixed distance of 1.2. And I want to be I want it to be at the center. All right, so this
is okay. There are also these other options, but center is fine for me. Then the beam type, you
click there and I want to pick the channel. I've already loaded this one. All right, so I can pick
it from here. Okay, now once you do that, just click on the green checkmark, you are going to
have those buildings so it's intersecting like that. Don't worry, just click just remove the
beam system. At least we have the initial setup or we need to just add one at the end here and
another one at the end here. The setup is good. So I'll just click on remove beam system. Now I'll
just select one, right click and select all instances visible in view. I've selected these.
Now I'll just use this property here to offset the z-justification. It's at top that's why it's
sitting right there on top. What I want to change this one now is to bottom. Just click there and
bottom. So all these now sit at the bottom there of this one here. Now what I can do, of course,
I need one padding here. These are set properly. Okay, so I can just pick this one and just click
on copy. I think since the plane is sitting right there on top, I can always pick it like that. As
you can see, it's moving parallel to the plane because I already set it up on top there. So I
can just move it there. It's fine. As long as this distance is not more than this one, then
that's okay because this is just the maximum distance. I can also select this member also.
Just copy. The plane is on top there. So if I just pick, actually I can even pick it from there.
If I just drag it like that, I can always make sure that it's parallel there. I can
make sure that this is there and I can select this one. I think it's okay. I can even move it
down there. I think this is how you can add your paddings. As you can see, we have the entire
structure done. Now as an exercise, proceed and add the other paddings on the side here. So this
is how you can create your structure just in this simple way. Now if you like what I'm doing on this
channel, please make sure that you like my videos. Comment there if you need more lessons. I'll be
able to do it for you. See you in some upcoming lessons.
