Every day brings more knowledge and experience to the table. Most of the time, that means plans change based on new information. Our outside focus is shifting closer to the shop.
I've decided to turn the west side of the shop into a dedicated log yard. With the sawmill under the lean-to, the best current plan is to optimize that side of the shop for logs and lumber. How it looks doesn't matter right now. Organized function is what I'm after. When the house is closer to a reality, we can re-evaluate how we want this side of the shop to look.
The east side of the shop is a clean slate with convenient and easy access. Jamie will take over this space as a raised-bed garden area. Focusing on plants that don't require full sunlight. Primarily leafy greens, root vegetables, and certain herbs.
JK Boots: Hands down, without question, the best outdoor working boot that I have ever tried. They aren't cheap and they aren't inexpensive. The break-in period was brutal for me. But after some boot oil and a few working days for them to conform to my feet, I've never worked in anything as form fitting and comfortable.
My Lineup: - O.T. Bison Canyon for everyday work - Superduty Bison Shadow Roughout Smooth for earth work days - The Buck Indigo Chocolate square toe western for days where quick on and off are valued USE THE CODE jaybates TO GET $75 OFF on purchases of $200 or more! https://www.jkboots.com/products/o-t-bison-rust-roughout-smooth?bg_ref=BwlWA71DVt
BPO3 is supported by Timberking
Sawmills. For more information on my
1220 CRZ mill or one of many fully
hydraulic options, go to timberking.com.
Grace, this stick is a trip hazard.
OSHA will not approve. Don't mind the
extension cord going through the door.
This stick, this is not acceptable. I am
a big fan of quotes. I'm a big fan of
inspirational sayings, stuff that you
can really resonate with. And a couple
of my favorites are nothing works unless
you do, right? Nothing works unless you
do. That's self-explanatory. You can sit
here and wish wish your life to be
different or wish this to happen or wish
for this improvement or wish for winning
lottery numbers,
but simply put, nothing works unless you
do. I really really like that one.
Something that I tell my daughter all
the time and I've told her since the
very beginning is is I tell her to
instead of being upset about what we
don't have, be thankful for what we do
have. Number one. And number two, when
it comes to what you have, you can
absolutely have anything you want in
life. You can have anything that you
want in life so long as you earn it. You
can have anything you want in life so
long as you earn it. I love those. I
love those things. Mike Tyson, everyone
has a plan until you get punched in the
mouth or punched in the face. I forget
the exact wording.
Meaning, you can plan all you want, but
until you're right there in the moment
making decisions that directly impact
what's going on,
you know, things will change, right? So,
we've had so many different plans for
this space and we keep changing them.
And it's that's not because we're
indecisive or because we're we think
we're making bad decisions. It's we're
constantly improving our thought
process, improving the way we see
things. And all of those changes are
based upon the progress that we've
already made and the experience that
we've just gained. So this whole 2acre
clearing
keeps changing with our major plans. Uh
let me uh let me walk over to the to the
leanto side to the sawmill area.
and just start pointing and talking. So,
one thing that's not going to change is
the house location. And that's mostly
due to uh our electrical where is it at?
Our electrical box right there
underground. What is it? Pad mount
transformer. I think I have a maximum
distance of like 150 ft for two legs off
of this service. So, I think I'm
tethered to that by 150 ft or so for the
house. That's always been the plan to
put the house over there. We're still on
board with that. No problems whatsoever.
Jaime's small first garden right there.
So proud of her for actually sticking to
it with with um you know bad
circumstances. Essentially she started
planting in this stuff. Like there's
there's nothing there. There's no
nutrients there. She's harvested not as
much as she wanted, but we've had
several salads completely grown right
there in the garden with our supper.
She's had several flowers that she's
picked and whatnot. She's she's done
great as far as I'm concerned, as far as
everything that she's u uh been up
against. That has encouraged her to want
to expand to a larger garden, which I
don't know if you can see it, but
there's a bunch of fence posts over
there or or Tposts that we stuck in the
ground. And that is 30 ft by 150 ft. So,
that's the expansion of the garden.
That's garden 2.0 over there. And that
makes sense because
all of the ground slopes this way. So
when it comes to the ground drying up,
that dries up the least. And it has full
sun. Uh full sun throughout the day,
even though that that is south. H it's
not quite that way south. A little bit
more this way is south. Uh this this is
fully sun. So that's going to be a
garden 2.0. But does it really make
sense right now to expand in this
direction with our focus and with our
efforts? I don't think so. I do not
think so for a couple reasons. Number
one, we have no real master plan for how
this is going to be laid out. When I had
the first drone footage, I drew on the
screen in one of the videos and kind of
made a layout. Well, everything since
then has changed because I initially
wanted the garden up there and that's
over here. All kinds of stuff has
changed and we we just really can't
completely figure out this space.
Another thing that we can't figure out
is how the sawmill is going to long-term
work right here. This works right here.
Maybe for the next 5 years it's going to
stay here. I don't know, but maybe
eventually it doesn't. In the meantime,
I'm going to turn this into my logard.
I've I mean, I don't really have a plan
to make all this nice lush vegetation.
The sawmill's right here anyway. Why not
just turn this into a logard? When we
build the house, and this is an eyesore,
we can change that down the road. But in
the meantime, the house is not in the
cards anytime soon. So, let's maximize
this for functional use. So, all of my
logs I want to start bringing over here
and turning this into a logard area.
that's going to make it easier and more
convenient for me to keep using and and
maximizing this space from a functional
standpoint. So that means the garden I
don't think it's appropriate for us we
don't think it's appropriate for us to
start in on expanding the garden over
there. Whoops. I think it's more
appropriate to expand the garden on the
other side of the shop first. This side
of the shop was kind of like the Mike
Tyson quote where you get punched in the
face and things change. We got it to
this state and we're like, "Holy cow, I
like this side of the shop now.
It's it's a usable, functional space."
And let's make the best of the most of
it because guess what? Not only is it,
you know, a clean slate, but there's the
door. It is so convenient to just pop
out here and do something and pop back
in there. Right. So, we're gonna have a
parking space like we've always had and
then another garden space. I think
Jamie's going to settle with a bunch of
different garden spaces spread
throughout the property. That one over
there is most likely going to be row
crops. So, um, herb in the ground
gardening and whatnot, but we don't have
the time or finances necessary to make a
good perimeter fence around that to keep
animals out. So, I don't want to focus
on that right now. Instead, it'll be
much more convenient, much easier, much
more inexpensive to turn this into a
raised bed in g raised bed. raised bed
garden
area. My goodness. All right, so these
stakes represent one raised bed, 4 ft
wide, 8 ft long. A sheet of plywood,
super easy to do. Um, and we went with
this size because we were on both sides
of these stakes and realized from both
sides you can reach the center at 2 ft.
So, it should be fine. And again, this
is a big experiment anyway. So, we'll
have 4T walkways, 4T between the shop
and the raised bed, 4T wide bed, 4ft
wide walkway, another 4ft wide bed,
another 4ft wide walkway, and then
another 4ft wide bed. So, we'll have 1 2
3 4 five six raised beds out here. And
in between all of this area, the walking
area in between, we're going to use wood
chips to keep the ground cover down, but
also get it to where you can walk in
here all the time, regardless of rain or
whatever. And when you have nothing but
wood chips covering the ground if you do
have weeds coming up, um it's super easy
to pull them. There's nothing there
really holding them down. So Jamie can
keep this nice and tidy as she works in
her garden space. It'll um it'll give
Jamie a a her space, you know. I've got
the the sawmill area. I've got my corner
of the shop. She has her garden over
there. Uh she'll probably still tinker
with that, but this will be like the
super super convenient area. Now, we
just put the gutters underground through
this area right here. And they pop out
over here. This is also convenient to
turn this into a garden area because I
don't want anybody I don't want any
heavy equipment driving over these
pipes. So therefore, uh we can block
this off. This will still be parking. So
my plan is to uh cut up some beams and
use beams kind of like a parking curb,
right? I'll put the beams all the way
through here. So we can drive up and you
stop at the beams. Then you can walk
over the beams onto a bed of gravel into
the door. So wherever the door stops on
this side, I'm going to continue this
line all the way out and this side will
be gravel. That means you're walking on
top of gravel on that is covering up
these pipes. This should always and it's
all sloped away from the shop anyway.
So, this should always stay dry to walk
on. And because it's blocked off with
the beams, no one's going to drive over
here and mess up the pipes. So, that'll
be convenient. And then we'll have a a
barrier of some kind for the wood chips
over here. Maybe another row of beams.
I'm not exactly sure. Or maybe it's just
wood chips. wood chips and and rock and
no barrier in between, just a just a
visual line. I don't know. But, uh, this
is this is a clean slate and it looks to
be convenient and exciting to turn it
into
our first finished usable space. I mean,
it sounds crazy to say that we'll have a
space that is finished. Nothing's really
finished. It always evolves over time,
but the closest thing that we've ever
had to finished on this property, it
seems like. Um, this will also have a
little bit of extra area over here. So,
maybe this area in this corner right
here is a spot for some benches and a
fire pit. Maybe. I don't know. Uh, maybe
if we start using this space quite a
bit, then I can sink a pole over here,
sink a pole over here, and pull some
string lights off of the shop and we
have some nice uh outdoor lighting over
here. Maybe. I don't know. Maybe there's
she wants to use more shade tolerant
plants and it'll uh provide an
opportunity for me to put four posts in
the ground and put a pergola up on top.
I don't know. But this this space has
become exciting for us. Uh we are both
just walking around staking this off
talking about all kinds of fun ideas and
it it just became exciting really fast.
If we keep our focus right here, that's
also going to make me focus right here.
And I've really been saying that I would
need to get this stuff cleaned up and
the stumps knocked back down, the stumps
ground into the ground, and then master
plan an orchard over here. This is 1.3
acres. There's plenty enough space to
turn this into something uh really,
really nice. Also on the short list of
things to do is a chicken tractor. We
got to get some chickens. We eat a lot
of eggs and um we Jamie's sister has
chickens and we get free chicken eggs.
Free Yeah. chicken eggs from her and
they are delicious. They are so good.
So, we want to get chickens out here and
we want to get chickens out here
yesterday. You know what I'm saying?
Well, this is a lot of vegetation and
grass and whatnot. Of course, I need to
knock it back down, but we plenty enough
space to pull a chicken track tractor
through here every single day while we
develop this space. So yeah, everything
is pointing towards this side of the
shop, demanding our focus right now
versus that side of the shop. I'm going
to turn that side of the shop
essentially into a logard into a sawmill
yard while we figure out this space.
That is the uh that's my Mike Tyson
punched in the face story for today.
Things have changed and it's all based
upon the experience of getting this
little corner nice and tidy. Uh for
today, I want to start milling the beams
to go right here and then if I've got
time, uh start in on the raised beds.
The raised beds are going to be super
easy. You saw me make the pallets for
the lumber uh to come off the sawmill.
Essentially, I'm going to make pallets
with no gap in between and two on either
side and then connect them on the short
sides and boom, raised bed. When I crank
this up, the animals scatter, which I
like. Obviously, they don't like loud
noises, but it looks like this is the uh
the jungle gym at the zoo. How you
doing, Mr. Ray? We took your uh e-collar
off for the first time today. Oh, okay.
Okay. It's about to get serious.
About to get serious
pow
pow pow pow. Smack crackle pop.
All
right. All of this is levelish. It needs
to be more level. So, I've got to hit
this with a tractor box blade. Just
smooth it out the best I can real quick
before we uh mill up the material for
the uh planter boxes. or raised beds,
whatever they're called.
[Music]
>> Yesterday, we went riding through the
property again as a family on a side by
side and uh the spot where the the two
spots that I've used this mulchure uh
have grown back with some grasses and
and just native stuff coming back
through and knocked the weeds back, the
the kudzu back and the vines back. So,
it's given some some grasses some
opportunity to thrive. So, all anyway, I
really really like the way that uh the
land is coming back after using this.
So, the next time I put this back on the
mulchure, well, let's start from here
and work our way this way. Remember, I
skipped this to get into the tree area.
And my my thinking there was that I I
really wanted to get into the tree area
cuz I got to take these trees down.
Well, yes, but now this this just looks
bad. Looks like an eyesore. Doesn't
really um doesn't really do anything for
us. So, next time I put the mulch on, I
think I'm going to start over there and
work my way this way through all of this
and tidy up all this. That will give me
the opportunity to knock these stumps
down and grind them up.
Much slower process than what I
initially thought, as is the theme with
everything around here. If you haven't
already noticed,
it's just Nollie following me around
this morning. Grace is not following me
around because Grace has an e-collar on
her and she's in the cage and she's not
happy that she can't uh play with daddy
this morning. She is not She's not
happy. And not not like an angry happy
like Ray the cat, the black cat when he
was neutered, he was angry. Like that
cat was vicious. I had to use my welding
gloves to handle this cat. He was just
not having it. Grace is looking at you
with them sad puppy dog eyes like I just
want some lovings. And it's just
it's a different kind of not happy, you
know. And uh so she's in the cage. She
was spayed
2 days ago. Yesterday was her first full
day in the cage. She's just way too
energetic and hyper. and her incision on
her belly was uh a little bit larger
than normal. They didn't tell us why,
but they did say it was a little bit
larger than normal. So, definitely take
it easy on the exercise and jumping
around. Well, Grace is like I always say
that I always say Nollie is a linebacker
and Grace is a wide receiver or a or a
running back. Grace is incredibly agile.
Likes to jump on everything. Likes to
jump over everything. She is a ninja
warrior. That's what it is. Oh, that's
the better way to say it. Grace is a
ninja warrior and Nollie's like a
powerlifter. I guess he's he's a big
boy. He doesn't like to be a lot of a
lot of uh running around activity.
Unless we're on the four-wheeler, then
he'll run around. So, anyway, um Grace
can't be out. She has to be in the cage
until she gets a little bit better. I
think it was uh
7 to 10 days with the e-collar on. Ray
after day four or five, he's just like,
"Ah, this is life, whatever." And it
didn't bother him at all. Nollie, when
Nollie was uh neutered, he hated the
cone. He would ma mash the cone up
against everything. He started chewing
the cone, all kinds of stuff. He hated
the cone. So far, Grace is doing well
with the cone. She's just she's just sad
that she can't be with us. And I'm kind
of a little sad, too. It's a little bit
different without her being with me. So,
what am I doing today?
I am going to attack these piles of
logs. Today, I'm going to mill lumber
and that's it. I did the 10hour service
on this uh engine yesterday.
This is a 23 horsepower Vangu Vanguard
engine. Super easy to do the uh 10-hour
service, by the way. So, we have an
extended uh pipe off of here with an
elbow and a plug on the bottom. You use
a 3/8 of an inch ratchet to just take
this plug out and drain your oil. Easy
peasy. The oil filter is nice and
accessible over there.
And this is nice little tiny engine to
work on. Um, easy peasy. Anyway, 10-hour
break-in service. I got that done at 9
hours and 31 minutes on the on the uh
meter right there. I completely forgot
about the wood chipper. So, I kind of
had like a cliffhanger ending a couple
videos videos ago on the wood chipper.
It's still in the shop. I got it back
out here and uh chipping a little bit of
stuff and I don't know if I hit metal or
something, but I noticed like it was
like a light switch. It just stopped
chipping efficiently and the tractor was
jumping around. and it was having a hard
time. I'm like, what in the world is
going on? So, I bring it back out of the
shop and I took a big gouge out of all
the blades on it. I don't know, maybe
piece of metal was in there. I don't
know. But there's a huge chunk missing
out of all of the blades in the same
spot. So, I have to rotate the blades.
Well, I looked in looked into that
particular process, and the blades are
held in place with bolts with nylon lock
nuts. And if you're familiar with nylon
lock nuts, as you engage them for the
first time, you're essentially cutting
threads. So, it's really not recommended
you reuse those over and over again, uh,
for important situations like, you know,
holding on to spinning spinning blades.
So, $6 online was the cost for uh 20, if
I'm not mistaken, 20 of these um, lock
nuts. So, whenever they arrive, I'll put
those back on and I'll show that and
then we'll get back to chipping because
I've chipped quite a few of these slabs
off the sawmill and I think that's
definitely the way to go for what we
want to do.
[Music]
You know it's true
you
have fun
you
have fun
[Music]
you
Heat.
[Music]
[Applause]
[Music]
[Applause]
Heat.
Heat.
[Music]
Heat.
[Music]
Heat. Heat.
[Music]
[Music]
[Music]
Heat up here.
[Music]
[Music]
I think I'm done with the physical stuff
for today. I got four logs mil and
the uh the camera here said it was 3
hours total like on the dot 1210 to 310
uh of actually recording uh that time
lapse. So I'm still trying to
excuse me I'm still trying to uh get
faster at this whole process and I'm
learning stuff as I go. Something that I
did learn is that I'm running into kind
of a
well a situation with a Tetris situation
stacking this lumber. Everything I cut
today starts here at this pallet. So
this is the slats on the pallet. So 1 2
3 4 5 6 seven rows of 42 in wide
um one by material.
And as you can see, the pallet ends
right here. But I've got a few rows
sticking off the pallet this way because
these boards were 11 11 or 11 and some
change wide. And well, four of them is
44. And I've got 42in pallets plus the
gap or 42 in runners for the pallets
plus the gap in between. So a little bit
more than 44 in in uh total length. Not
the end of the world, especially not for
what I'm doing. Um, but I think I it
would be better to start pulling all the
material off the sawmill and rather than
stacking it immediately, put them on a
pair of saw horses and then when I'm
ready to stack or when I get a bunch of
different width material, then I could
play the Tetris game of trying to mix
and match to make sure that we stay
within the 42in bounds of each one of
the pallets. Uh, so that's pretty cool.
Um, uh, how many rows was that? 1 2 3 4
5 6 seven rows. I think 12 or 14
um is as high as I want to go. So about
double that.
That's pretty high. I need to reduce
this down so I can actually start
stacking it. Uh but what I was getting
at is as soon as that one's done, I have
a fresh pallet right below it to start
stacking once again. Uh, as soon as this
pallet is done, I want to switch gears
and build or mill two more beams to set
out in the yard and level them. That
way, I can take this full bunk and set
it on top. Have a pallet ready to go to
build a second bunk and set it on top of
that. And then probably cover the top of
this, crown it a little bit with some of
the slabs that came off the mill.
Grace is How's she doing? Is she doing
better?
>> Yeah, she's fine.
>> She's fine.
Grace is uh not liking the restriction
of her cone.
How you doing, good girl? How you doing?
Yeah, we'll play fetch in a couple days.
Oh, yes. Love you. Love you.
She's doing all right, though. Um
yeah, I've got a pile of chaos. I need
to consolidate this and get back to
organized pallets. I I I I was
scattered. I went 2x4s, 2x 12s, 1 by all
over the place. 8ft lengths, 10t, 12t. I
need to get each one of these bunks down
to their their proper dimensions, 8 ft
long lengthwise, and uh just build on
top of that. Like I said, I'm learning a
lot. And one thing that I'm really
learning is with this, as humid as it is
here in Mississippi, I need air flow
immediately. I wiped these off the best
I could. Brushed them, blew them, all of
that. And I'm still getting some some
mold. So, I'm trying to take a few steps
to not get as much of that. First thing
that I did is I really tinkered with
this valve. I've got to get one of those
nice brass drip valves so you can really
really dial in a drip. But I messed with
this. I don't even want to touch it.
Messed with this a decent amount to
where I'm only getting a drip and not a
stream. I also increased the pine saw
cap uh content in here and I think
that's doing a better job as far as
being able to get the dust off because
it's less moisture and um the increase
in pine salt is reducing the amount of
buildup on the blade. So that's good. So
I'm trying I'm trying constantly
different things to get all the sawdust
off. And right now I'm doing one pass
with the leaf blower and then brushing
it with the broom and then a quick pass
again with the leaf blower on all faces.
That's actually the fastest. That is
faster than simply using the air
compressor. I think that's the best one
so far. The the the reduced amount of
water means the reduced amount of of
sawdust sticking to the surface. a
reduced amount of wet sawdust sticking
to the surface hopefully results in the
uh a reduced amount of surface mold mold
and mildew that green stuff. And then
also air flow. The more air flow we
have, the less mold and mildew and all
that stuff we have. And I tested that
with this pile of stickers. I put a fan
on here, just one of these box fans on
top of this blowing down on low for like
a week before I even messed with these.
And I've looked around through the
inside of there. There's no signs of
green mildew at all on any of the
stickers. And the green mildew that was
on the 2x4s uh when I made this
particular pallet has been reduced. So
air flow is the key. Which means I'm
going to try and stack in one location
every time I mill. That way when I'm
done milling, I can set the fan on low
and walk away. And that's what I'm going
to do today.
[Music]
You know it's true.
Loveing you is a dream where I have fun.
Yeah. Yeah.
Loving you is a dream where I have fun.
Yeah. Baby,
loving you is a train way to have fun.
[Music]
[Applause]
[Music]