Supersonic rev resurrection latest after fitting brass bushes in housings

The Technology of Old Crossbows
4 followers
1 Video View·Aug 18, 2025
Supersonic rev resurrection latest after fitting brass bushes in housings
That was the best side.
You can see the gap opening up on that.
Pin.
Not on the pin, but on the hose.
Now that was the least worn side.
This was the worst side.
I have just put my brass bushes in this.
And that is as tight as a drum.
Can't get that to move at all.
I'll get the other bushes in the other side now and get it strung up and see what she does.
After much playing about and fitting brass inserts,
it's finally back together and it's not jumping the string off the cam anymore.
The cams are sitting nice and upright.
Now a bit of snow doing.
326 with 140 grain.
I've replaced the silly bits of brass with two rollers on the caulking mechanism.
I'm not pulling my guts out trying to caulk it anymore.
And 52 grain, 316.8.
This one is 157.
311.6
And 65.2 grains.
And 7, exactly.
Working reliably.
Now the cams are sitting much straighter than they were.
But this right hand side one is still tilting very slightly.
I shall apply more later.
